A Gatewood company - serving Enterprise, NV
Gate Installation in Enterprise, NV | Gatewood Fence & Gate Enterprise - Gatewood Fence & Gate Enterprise

Gate Installation in Enterprise - Written Price, Install Date Set

Free on-site survey and a written price that includes the groundworks, the power run and the safety gear. Install date agreed before we order, and the system handed over tested and documented.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Trusted Gate Installation for Enterprise Homeowners

If your gate has started dragging on the ground, sticking halfway open, or leaving a gap a person could squeeze through, the hinge post is usually the culprit – and a new gate hung on a failing post will fail again. Gatewood Fence & Gate builds and hangs driveway, pedestrian, sliding, swing, double, and security gates for homeowners across Enterprise, and we fix the post first so the gate you pay for stays true. Our technicians bring up to 25 years of experience to every job, and the work is backed by our 90-Day Done Right Promise in writing. Calls reach a live person around the clock at (833) 780-1547, so you’re never stuck leaving a message with a national outfit that won’t call back.

Call (833) 780-1547

What Our Gate Installation Service Includes

Every gate is measured against your fence line, your grade, and the way you actually use the opening. We don’t sell a package off a truck. Here’s what each type covers.

Driveway Gate

A driveway gate spans the full width of your vehicle access, and that width is where most installations go wrong – a post set too shallow, a span too long for the operator, a leaf that sags within a season. We set the footings to depth and check the soil before we hang a single leaf. If you have a long rural driveway or a tight suburban approach, we’ll tell you up front which type suits the grade and the traffic.

Driveway Gate

Pedestrian Gate

A pedestrian gate is the walk-through opening – the one people use a dozen times a day – so it takes far more hinge wear than most folks expect. We hang it square, with the hinges aligned so it swings free without a lift, and set the latch where hands naturally reach. When the gate is between the house and the street, we also look at self-closing options so it never stands open.

Pedestrian Gate

Sliding Gate

A sliding gate rolls along a track instead of swinging out, which makes it the right choice where the driveway is short or the gate would otherwise swing into traffic. We level the track, set the posts to carry the weight, and check the ground bearings so the leaf glides instead of jumping. Sliding gates on the slopes common in Enterprise need the track set carefully, or the gate will creep on its own.

Sliding Gate

Swing Gate

A swing gate opens on a hinge, and it’s the most common style we install because it fits most residential openings and works with a wide range of operators. We set the hinge post deep, align both hinges on the same plane, and hang the leaf so it swings with light pressure. If your gate is going to be automated later, we plan the hinge geometry now so the operator has room to work.

Double Gate

A double gate meets in the middle to cover a wide opening – the kind you see across a big driveway or a side yard with a shed behind it. We set both hinge posts to the same height and square the leaves to meet without rubbing, and we install a drop rod or center catch so the meeting point stays tight. When both leaves carry an operator, we sync them so one doesn’t outrun the other.

Security Gate

A security gate is the one that keeps a property closed and controlled, whether that’s a courtyard, a back lot, or the main entry. We build for the sightline and the closure – no gaps to slip through, latches that hold, and hardware that doesn’t rust out. If you want it tied to an opener or a keypad, we can plan the gate so the access hardware fits cleanly from day one.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (833) 780-1547

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Brands We Service for Gate Installation

When a new gate gets an opener, we work with the operators homeowners in Enterprise actually have. LiftMaster is everywhere on driveway gates, and we know where those units wear and what gate weight and width keeps them running. FAAC operators show up on heavier sliding and swing gates, and we match the gate’s leaf weight to the operator’s rating so it isn’t working against itself. Mighty Mule is a common choice for lighter residential swing gates, and we set those up with the swing clearance they need so the gate doesn’t stall halfway.

We’re certified to service nine major gate brands, and the work is about matching the gate to the operator rather than forcing one to fit the other. Whether you have Mighty Mule, LiftMaster, FAAC, BFT, or any other make, we can help. If you’re weighing repair against replacement, a free second opinion on any written estimate is always on the table.

Signs You Need Gate Installation Right Now

  • The gate drags or scuffs the ground. A leaf that scrapes as it swings means the hinge post has shifted or the footing is failing. A new leaf on the same bad post will drag again within weeks, so the post gets fixed first.
  • The gate won’t stay closed and swings open on its own. That’s a hinge alignment or grade problem, and left alone it puts strain on latches and operators. Show us the gate closing on its own and we’ll show you where it’s failing.
  • The hinge post is leaning or the footings look loose. Settled soil or shallow footings pull a post out of plumb, and that twist runs straight up the gate. This is the most common reason a repair turns into a replacement.
  • A gap has opened that a person or pet can slip through. A security gate with a gap isn’t doing the job you installed it for. We rebuild the closure so the opening stays controlled.
  • The gate is rusted through or the frame has bent. Heavy corrosion and bent frames stop responding to repair, and welding new steel to rotten steel just moves the problem. That’s when a fresh install makes financial sense.

Our Gate Installation Process – Step by Step

  1. 1
    On-site measure and walkthrough. We come out, measure the opening, check the grade, and look at the soil and existing footings. We ask how you use the gate – daily car traffic, a walk-through path, an opener down the road – because that shapes the recommendation.
  2. 2
    Written, upfront price. You get the scope and the number in writing before anything is ordered or built. No haggling, no surprise at the door, no phone quote that changes on arrival.
  3. 3
    Post and footing set. We dig and set the hinge posts to depth, plumb and square, and let the footings cure before the gate goes on. This step is where most gate problems begin, so we don’t rush it.
  4. 4
    Build and hang the gate. We set the leaf to the opening, align the hinges, and check the swing or slide by hand before anything else. On-site welding means the gate stays in your driveway instead of being hauled off to a shop.
  5. 5
    Final check and the promise. We show you how the gate moves, check the latch and closure, and hand you the 90-Day Done Right Promise in writing. One call brings us back if something isn’t right.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Gate Installation Cost in Enterprise?

A typical pedestrian gate in Enterprise runs $900 – $1,800 depending on material and whether an opener is added, while a standard single driveway swing gate lands around $2,200 – $4,500. A double driveway gate runs $4,000 – $7,500, and a heavy security gate or sliding gate with automation can go higher. Material drives most of the spread – steel and aluminum cost differently, and the finish and hardware add up. Post depth, grade work, and whether footings need to be replaced also move the number, and so does adding an operator like a LiftMaster or FAAC.

The way to avoid overpaying is to get the price in writing before work starts and to know what’s included: posts, footings, hardware, latch, and cleanup. Our free estimate covers the measure, the recommendation, and the number, and it’s quoted and agreed before any work begins. Standing offers don’t require haggling – $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (833) 780-1547 for an exact quote.

Gate Installation Near Enterprise – Our Service Area

We install gates throughout Enterprise and the surrounding valley – Spring Valley, Paradise, Summerlin, Winchester, Henderson, Whitney, Sunrise Manor, Las Vegas, North Las Vegas, Boulder City, and Sandy Valley. Because those communities sit close together, a written estimate and a scheduled visit are rarely far off. If you’re comparing options across the area, our Gate Installation in Spring Valley page shows how the same work looks nearby. Installation work is measured and scheduled, not dispatched same day, so we’ll give you a firm visit window when you call.

Serving Enterprise, NV – Our Local Coverage Area

We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions – Gate Installation in Enterprise

Schedule Your Gate Installation Service in Enterprise Today

If your gate is dragging, gapping, or leaning on a post that’s past saving, it’s time to fix it right. Call Gatewood Fence & Gate at (833) 780-1547 for a free, no-obligation estimate on gate installation in Enterprise. The price is agreed before any work starts, our technicians bring up to 25 years of experience, and every job is backed by our 90-Day Done Right Promise in writing. A live person answers, around the clock. You can also read how this work looks in Gate Installation in Paradise.

Written by the team at Gatewood Fence & Gate.

Why Enterprise Chooses Gatewood Fence & Gate Enterprise

We set the standard for gate installation in Enterprise.

30-60 Min Response

Fast dispatch across Enterprise. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Enterprise

Getting your gate installation handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate installation needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Enterprise - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate installation pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 30-60 min.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Enterprise Customers Say

Trusted by homeowners across Enterprise and surrounding areas.

★★★★★

"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."

Ingrid Solheim
★★★★★

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

Winston Achterberg
★★★★★

"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."

Salvador Arredondo

Ready for Gate Installation in Enterprise?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Enterprise.

(833) 780-1547

Request a Free Estimate in Enterprise

Tell us about your gate installation needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch