A Gatewood company - serving Enterprise, NV

Pedestrian Gate in Enterprise, NV

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pedestrian Gate in Enterprise, NV

A pedestrian gate is the walk-through gate beside your driveway gate, the one people use on foot, and installing one in Enterprise usually runs $900 to $2,600 depending on width, material, and whether you want it to open on its own. We build and hang them so they swing level, latch on the first try, and line up with the driveway gate instead of fighting it. Call (833) 780-1547 and a live person picks up, day or night.

Most of the walk gates we see around Enterprise started as an afterthought. Somebody cut a 3-foot gap in the fence, hung a gate on undersized hinges, and it worked fine for about two summers. Then the post leans, the latch stops catching, and the gate drags across the concrete every time somebody opens it. A pedestrian gate is a small structure with its own post, its own footing, and its own hardware, and it has to be built that way from the start. That is the whole job.

We’re Gatewood Fence & Gate, locally owned and owner-operated, and pedestrian gates are part of our Gate Installation work across the Enterprise area. Our technicians have up to 25 years of experience, and we stay on site with the welder when a post needs to be tied into the existing fence line rather than bolted on and hoped for. If you want the person who quotes the work to be the person who does it, that’s how we run. A gate sags in the hinge post, not in the middle, and that is where we start.

When You Need a Pedestrian Gate

The reasons homeowners call us about walk gates fall into a few recognizable buckets. If any of these sound like your yard, you’re not the first person in your neighborhood to bring it up.

  • The driveway gate works but getting out on foot is a hassle. You’re driving the car through every time somebody wants to walk to the mailbox or down to the corner, or you’re leaving the big gate open all day. A matching walk gate solves it, and we can pattern it after the driveway gate so the two read as one unit from the street.
  • The old walk gate has stopped latching. It swings free in the wind, or the latch has to be lifted just right to close. That’s usually a hinge post that has moved and a latch that was set to the wrong side in the first place. Rehanging the gate on a solid post and resetting the latch is a repair we do often.
  • You have a pool and want the walk side self-closing and self-latching. Pool safety rules in Nevada put real weight on gates that close and latch on their own, and a pedestrian gate on the pool side of the yard needs to meet that. We install self-closing hinges and latches built for it.
  • The side yard needs a gate that matches the fence, not a chain-link panel zip-tied to a post. Wrought iron walk gates against a block wall, wood gates to match a cedar fence, aluminum to match a powder-coated driveway gate. The material matters less than getting the post and footing right underneath it.
  • The gate is too narrow or too low for daily use. A 30-inch gate is fine for a trash can and miserable for a lawn mower. We size walk gates for what actually goes through them, including the wheelbarrow and the grandkids’ bikes.
  • You want a keypad or an intercom on the walk side. Handy for deliveries and for the meter reader. We wire keypads and access control on walk gates alongside the driveway side, and we work with LiftMaster and FAAC hardware when you want the two gates to open on the same code.

Our Pedestrian Gate Process

No mystery, no waiting for the “install crew” to call you back. Here is the order of work from the first call to the gate swinging on its own.

  1. We talk on the phone and set a time. A real person answers, takes down the width, the material, and what the gate is for. You get a window, and the person who shows up is the person who shows up.
  2. We come look at the spot in person. The post is the whole story on a walk gate, so we check the soil, the concrete, and how the gate will line up with the fence and the driveway gate. We bring the tape and we bring the welder if the frames need to be tied into the existing steel.
  3. You get a written estimate before we start. Upfront pricing, no surprises at the door. If you have another written estimate, we’ll give you a free second opinion on it and tell you honestly whether it’s fair.
  4. We set the post and build the gate to fit. Footing first, post plumb and deep enough to hold, then the gate frame hung to match. On-site welding for the steel gates and hinge brackets, so nothing comes off the truck pre-drilled for the wrong width.
  5. We hang the gate and set the hardware. Hinges, latch, self-closer if you want one, keypad or intercom if that’s part of the job. Every gate gets opened and closed by hand until it swings level and latches on the first push.
  6. We walk it with you and stamp the promise. You open it, close it, and tell us what feels off. Every job carries our 90-Day Done Right Promise in writing, so one call brings us back if something isn’t right.

We’re on site with the welder more often than most shops because pedestrian gates that tie into steel driveway frames need to be tied in place. Hauling a gate back to a shop means it fits the shop, not your fence line. The name is on the shop, and the shop is down the road, which is the oldest accountability there is.

Pedestrian Gate Pricing in Enterprise

Here is the honest range. These are the numbers we see in the Enterprise market, not a bait price that changes at the door.

Job Typical range
Standard aluminum walk gate, 3 to 4 ft, installed $900 to $1,500
Wood walk gate matched to existing fence $1,100 to $1,800
Wrought iron walk gate with matching frame $1,400 to $2,600
Self-closing hinge and latch set (pool side) $250 to $450
Keypad or intercom on the walk side $350 to $800
Rehang or relatch an existing walk gate $180 to $420
New post and footing only (no gate) $400 to $900

What moves the number: the material, the width, whether the post needs a fresh footing, and whether the gate has to tie into steel driveway frames instead of sitting on its own. Access control adds cost because it adds hardware and wire. A self-closing hinge set is a small add and one of the few things worth doing on any walk gate near water.

Standing offers, no haggling needed: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. If you’ve been quoted somewhere else and something feels off, call and we’ll read it with you. Estimates are free.

FAQs – Pedestrian Gate

How much does a pedestrian gate cost in Enterprise, NV?

Pedestrian gate installation in Enterprise typically runs $900 to $2,600, depending on the material, the width, and whether the post needs a new footing. A basic aluminum walk gate installed is on the low end, a wrought iron gate matched to a driveway gate is on the high end, and rehanging an existing gate is usually $180 to $420. Call (833) 780-1547 for an exact quote, and the estimate is free.

Can a pedestrian gate match my driveway gate?

Yes, and it’s worth doing. We pattern walk gates after the driveway gate in the same material and finish, so the two read as one unit from the street. On steel gates that means welding the walk frame to tie into the driveway frame on the same line instead of hanging it a few inches off. If you want both gates to open on the same code, we work with LiftMaster and FAAC access hardware to make that happen. Call (833) 780-1547 and we’ll talk through the match.

Can you come out the same day?

Often, yes, for rehang and relatch work on an existing walk gate, and usually within a day or two for a new install. A live person answers the phone 24 hours a day, so if the gate has failed and somebody’s yard is open, call (833) 780-1547 and we’ll tell you straight whether we can get out today.

Is it cheaper to repair my walk gate or replace it?

Repair is almost always cheaper, and on a solid gate it’s the right call. A hinge post that has moved, a latch set to the wrong side, or a sagging frame are all fixes, not replacements, and repairs typically run $180 to $420 versus $900 to start over on a new gate. If the post itself is rotten or the frame is cracked through, we’ll tell you that plainly and walk you through the replace. Free second opinion on any written estimate, so bring it to us before you commit to the bigger number. Call (833) 780-1547.

What to Have Ready Before We Arrive

A few things speed up the visit. If you have a copy of the fence line on your property survey, have it handy, since setbacks on some Enterprise lots are tighter than they look. Clear the spot where the gate will go so we can see and set the footing without moving patio furniture. If the gate is tied to an access system, have the code or keypad instructions. And if you’ve been quoted elsewhere, have that written estimate out so we can give you the free second opinion while we’re there.

We keep the trucks light and the promises in writing. Calls are answered by a live person around the clock, and the person who quotes the work is the person who does it. You can drive to the shop, look me in the eye, and ask any question you want. We’re proud to serve the Enterprise area and the towns around it, and we’d rather fix the gate you have than sell you a new one you don’t need.

When you’re ready, call (833) 780-1547 for a free estimate. We’ll set a window, show up in it, and leave you with a walk gate that latches on the first push and a promise in writing for 90 days behind it.

Written by the team at Gatewood Fence & Gate Enterprise, serving Enterprise.

Need Gate Repair help in Enterprise? Licensed & insured · 30-60 min response · free estimates
Call (833) 780-1547
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Gatewood Fence & Gate Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch