Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Parts & Welding for Enterprise Homeowners
When a gate hinge tears loose from the post or a weld cracks at the rail joint, the whole gate starts to sag and drag, and the opener starts working harder than it should. In Enterprise, we fix that at your driveway instead of hauling the gate away for a week. Our technicians have up to 25 years of experience, and every job comes with the 90-Day Done Right Promise in writing. We answer the phone 24/7, and most gate part repairs in Enterprise can be handled the same day you call. Ring us at (833) 780-1547.
What Our Gate Parts & Welding Service Includes
We do the small work that other outfits skip past to sell you a whole new gate. Every one of these jobs is quoted upfront and agreed before we touch a tool.
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that is where we start. Worn or bent hinges let the gate drop, bind on the ground, and pull the opener out of adjustment. We cut out the old hinge, weld a new one square to the post, and check the swing before we call it done.

Post Replacement
A gate post rusts out at the soil line first, and once it goes soft the whole run leans. If the panel still has good years left, we set a new post and reset the gate back to true. Fix the panel without the post and you’ll fix it twice, so we look at both together.

Rail Repair
The bottom rail takes the most abuse – lawnmowers, cars, kids. When a rail cracks or bends, the gate loses its stiffness and starts to rack. We straighten or replace the rail and weld it back into the frame so the gate tracks flat again.

Custom Welding
Some gates need a repair no factory part covers: a broken dog-ear, a snapped spindle, a custom frame that got clipped by a truck. We weld steel and aluminum on site and match the existing finish as close as the metal allows. That is the difference between a repair and a patch.
Gate Rollers
Sliding gates ride on rollers, and worn rollers make a gate grind, wobble, or jump the track. We pull the old rollers, check the track for wear, and fit new ones so the gate glides instead of stumbles. It is one of the cheapest fixes on a sliding gate and one of the most neglected.
Latch & Lock
A latch that won’t catch or a lock that sticks is a security problem before it is an annoyance. We repair and replace latches, drop rods, and gate locks and line them up so they engage every time. We also check that the lock still works with your access control setup if you have one.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Brands We Service for Gate Parts & Welding
We service LiftMaster equipment and know where it wears out – the torsion and chain hardware takes a beating when a gate starts to drag, and that is usually the first thing to fail. We also work on Mighty Mule operators, which are common on Rural Estates and smaller residential driveways around Enterprise, and we know the limits of those units when a gate gets heavy or out of line.
FAAC and BFT systems turn up on heavier sliding gates around the valley, and we understand how their tracks and hardware wear when a gate is out of square. Whether you have LiftMaster, Mighty Mule, FAAC, or any other make, we can help. The gate hardware and welding side is the same work regardless of the brand bolted to it.
Signs You Need Gate Parts & Welding Right Now
- The gate sags or drags on the ground. A dropped corner usually means a failed hinge or a post that has gone soft at the base. Left alone, it wears the opener and the rollers along with it.
- You can see a crack at a weld joint. A cracked weld spreads every time the gate opens and closes. Catch it early and it is a small weld job; wait and the frame itself can fail.
- The gate won’t latch without a shove. A misaligned gate fights the latch every time. That is usually a sign the gate has dropped, not a bad latch, and the alignment is the real fix.
- Grinding or squealing when the gate slides. Worn rollers or a bent track cause this. It also makes the motor work harder, and motors that work too hard quit sooner.
- The gate leans or the post wobbles. A loose post is a structural warning, and a gate that leans into a driveway or sidewalk is a hazard. Have it looked at before the next wind event.
Our Gate Parts & Welding Process – Step by Step
- 1
You call, a live person answers. We ask what the gate is doing and roughly what kind it is, then set a window that we keep. No voicemail tag, no callback queue.
- 2
We look at the gate on site. We check the hinges, post, rails, and rollers, and we run the gate through a full cycle to see how it moves. Show me the gate closing on its own and I’ll show you where it’s failing.
- 3
You get an upfront written price. We explain what failed and what it takes to fix it, and we quote it before any work starts. That number does not move unless you approve a change.
- 4
We weld and repair in your driveway. On-site welding keeps your gate where it belongs. We brace the frame, cut out the bad part, and weld the new hardware in square, then check the swing and the track.
- 5
We run the gate and back it in writing. We open and close it several times before we leave, and every job carries the 90-Day Done Right Promise. If it is not done right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Enterprise?
A typical hinge replacement in Enterprise runs $150 to $350 depending on how many hinges and whether the post needs work. Post replacement runs $300 to $800, and custom welding generally lands between $150 and $450. Rollers and latch or lock repairs are usually the least expensive items on the list.
What moves the price: the metal type (aluminum costs more to weld than steel), how much rust is at the base of the post, and whether the gate is manual or tied to an opener that needs realignment after the repair. On-site welding is usually less than hauling the gate off for a week, which is why we do it in your driveway.
How to avoid overpaying: get the price in writing before anyone starts, and if you have a written estimate already, we will give you a free second opinion on it. Our standing offers help too – $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Every job starts with a free estimate, and the price we quote is the price you pay.
Gate Parts & Welding Near Enterprise – Our Service Area
We cover Enterprise and the towns around it, including Spring Valley, Paradise, Winchester, Sunrise Manor, and Las Vegas. If you are further out toward Henderson, Whitney, Boulder City, or Sandy Valley, call and we will tell you honestly what the timing looks like. For gate welding work over in Spring Valley, we handle the same repairs through our Gate Parts & Welding in Spring Valley service, and you can see the rest of what we do on our home page.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Gate Parts & Welding in Enterprise
It is the repair work on the physical gate itself rather than the motor: hinges, posts, rails, rollers, latches, and locks, plus on-site welding to fix broken frames and hardware. It is the stuff that makes a gate hang and swing right, and it is what we do first before anyone talks about replacing the whole thing.
Most repairs take one to two hours on site, and many can be done the same day you call. A post replacement or a custom weld job can take longer, and we will tell you the real timeline when we quote it. On-site welding is what keeps it quick, because your gate stays in the driveway instead of going to a shop.
Expect roughly $150 to $800 depending on the job: hinge and latch work sits at the low end, posts and custom welding at the high end. We quote upfront and in writing before any work starts, so nothing changes at the door. Call (833) 780-1547 for an exact quote, and remember estimates are free.
Yes. We service LiftMaster and Mighty Mule, along with FAAC and BFT and other major makes. The gate hardware and welding work is the same regardless of the brand on the operator, and we will check that the gate is running true after the repair. If your opener also needs attention, our Gate Repair service covers that side.
For most gate part failures, yes – we handle same-day repairs across Enterprise when the schedule allows. A gate that is jammed shut, hanging off a hinge, or blocking a driveway gets priority. Call 24/7 and a live person answers, not a voicemail.
Every job carries the 90-Day Done Right Promise in writing. If something we fixed is not right, one call brings us back and we make it right, with no runaround. The promise is stamped on the job, not buried in fine print.
Clear a little space around the gate on both sides so we can swing it and weld safely, and unlock any manual latch or lock. If you know the gate or opener brand, tell us when you call – it saves a trip. Keep pets and kids inside while we are welding and be ready to point out anything the gate has been doing lately.
Schedule Your Gate Parts & Welding Service in Enterprise Today
If your gate is sagging, rattling, or refusing to latch, call (833) 780-1547 and a live person will pick up. We will set a time that we keep, quote the price upfront before any work starts, and back the job with the 90-Day Done Right Promise. Estimates are free, and there is no trip charge inside the county. Call today for a no-obligation estimate.
Written by the team at Gatewood Fence & Gate Enterprise.