A Gatewood company - serving Enterprise, NV
Gatewood Fence & Gate Enterprise gate repair team

Gate Parts & Welding Near Me in Enterprise - Made to Measure, Written Price

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Gate Parts & Welding Near You in Enterprise, NV

If you’re searching for gate parts and welding near you in Enterprise, NV, the short answer is this: we repair and weld gates on site, in your driveway, so the gate never leaves your property. We serve Enterprise and the surrounding neighborhoods, and when you call (833) 780-1547 a live person picks up, day or night. Our technicians bring up to 25 years of experience, and every job carries the 90-Day Done Right Promise in writing.

Most folks land here after the same thing happens. The gate won’t latch, the bottom hinge is torn out of the post, the opener groans and stops halfway, and somebody two towns over already told them the whole thing needs replacing. We’d rather look at it first. A sagging gate usually sags at the hinge post, not in the middle of the frame, and that is where we start every assessment. Fix the panel without the post and you’ll fix it twice.

We are locally owned and owner-operated, with a published address and license number anyone can look up. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.

Fast, Local Gate Parts & Welding

When a gate fails, it isn’t just an inconvenience. A gate that won’t close is a security risk, and a gate that drags on the ground is on its way to a bigger repair. So we treat parts and welding calls as priority work. We’re in Enterprise regularly, and we schedule by your side of town, which means we can often get out the same day for standard repairs like hinge replacement, latch adjustment, bent-frame straightening, and on-site welding.

What we do at your gate:

  • On-site welding. Broken hinge plates, cracked frames, split posts, gate stops, and reinforcement welds, done in the driveway. No hauling the gate away, no waiting a week for a shop.
  • Parts that actually fit. Rollers, hinges, latches, gate stops, chains, and brackets, matched to your gate rather than forced to fit.
  • Motor and opener service. We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
  • A real diagnosis first. Show me the gate closing on its own and I’ll show you where it’s failing. Sometimes it’s a hinge. Sometimes it’s the post. We tell you which, and we don’t swap a part that doesn’t need swapping.

Pricing is upfront and confirmed before any work begins. Standing offers include $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. No haggling, no surprise at the door.

For a deeper look at the parts and welding side of what we do, see our Gate Parts & Welding in Enterprise page, and for everything else we handle, start at our home page.

Areas We Cover

We work Enterprise first, and we cover the surrounding communities across the valley and into the outlying areas. That includes Spring Valley, Paradise, and Summerlin on the west side, plus Winchester and Whitney closer in, and Henderson and Sunrise Manor to the south and east.

If you’re on the edge of that map, call anyway. We’d rather tell you honestly whether we can get to you than have you guess. And if your gate is a drive gate that swings open on its own or a pedestrian gate that won’t latch, those are the same repairs we do in every one of these neighborhoods, so you won’t be the first on your street we’ve helped.

What to Check Before You Call

You don’t need to diagnose anything yourself. But a few quick observations help us load the right parts and save you a second visit. This is a “what to look at” list, not a repair guide. Hinges, springs, and anything under tension on a gate can store serious energy, and welding involves heat, sparks, and structural steel. Those are jobs for someone trained to handle them, not a weekend project.

  1. Look at the hinge post. Is the post itself leaning, rotted, or cracked? The gate usually sags because the thing holding it moved.
  2. Check where it drags. Note whether the gate touches the ground at the latch side, the middle, or the hinge side. That tells us the direction of the problem.
  3. Listen to the opener. A grinding, clicking, or stalling motor sounds different from a mechanical bind. Tell us which you hear.
  4. Note any broken welds. Cracks near hinge plates and gate stops are common and usually weldable on site.
  5. Look for rust and settling. Desert temperature swings work on gates and posts here. If you can see daylight through a weld or a post has shifted in the ground, tell us.

If any of that looks unsafe, like a hinge pulling loose from a post under load or a gate that could fall, leave it alone and call. That’s the right move.

Parts We Stock and Service

We keep the common failure parts close so a repair doesn’t stall on a special order. The list below covers most of what we see on residential and light commercial gates in Enterprise.

  • Hinges, hinge plates, and hinge-post brackets
  • Latches, gate stops, and catches
  • V-track rollers, cantilever carriers, and guide rollers
  • Chains, sprockets, and tension hardware
  • Opener arms, mounting brackets, and control boards
  • Keypads, exit loops, and access-control hardware
  • Weld repairs to frames, posts, and gate stops

Brands we’re certified to service include LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If yours isn’t on that list, call and describe it, and we’ll tell you straight whether it’s something we handle.

Why the Repair-First Approach Saves You Money

The honest truth is most gates we’re called to don’t need replacing. They need a hinge, a weld, a post fixed properly, or an opener that’s been misadjusted for a year. Replacement is the expensive path, and it’s often the first one quoted. We go the other way: inspect, diagnose, fix what’s broken, and confirm the gate actually closes and latches before we leave.

And when we do the work, it’s covered. Our 90-Day Done Right Promise is stamped in writing on every job. If something we touched isn’t right, one call brings us back. No runaround, no fine print.

How Scheduling Works

  1. Call (833) 780-1547. A live person answers, any hour. No voicemail, no automated menu.
  2. Describe the gate and the symptom. We ask a few questions to figure out the likely cause and what to bring.
  3. Get an upfront price. We confirm the cost before work begins. Standing offers apply automatically where they fit.
  4. We come to you. Welding and repair happen at your gate, on site, in your driveway.
  5. You check it before we go. The gate should close, latch, and swing clean. If it doesn’t, we’re not done.

FAQs

How fast can you get to my gate in Enterprise?

Same-day service is often possible for standard parts and welding repairs in Enterprise, and most calls get scheduled within a day or two. Because we schedule by area, calling early in the day gives us the best shot at getting you in today. Call (833) 780-1547 and we’ll give you a real window, not a vague one.

Do you serve my area near Enterprise?

Yes, if you’re in Enterprise or the surrounding communities, including Spring Valley, Paradise, Summerlin, Winchester, Henderson, Whitney, and Sunrise Manor. We cover those areas regularly. If you’re just outside them, call and ask. There’s no trip charge inside the county, and we’ll tell you honestly if we can reach you.

How much does gate parts and welding cost in Enterprise?

Most standard repairs, like a hinge replacement, latch fix, or a single weld, run in the low-to-mid hundreds depending on parts and access, and we confirm the exact price before any work starts. Repairs over $200 get $40 off, seniors and veterans get a permanent 10% discount, and a second opinion on any written estimate is free. Call (833) 780-1547 for an exact quote. Estimates are free.

Can you help after hours or on weekends?

Yes. A live person answers every call 24 hours a day, 7 days a week, including nights and weekends. We can often schedule emergency repairs for gates stuck open or a gate that won’t secure. Call (833) 780-1547 any time and you’ll talk to a person, not a recording.

Get Your Gate Fixed Right

If your gate is dragging, sagging, or won’t latch, it’s not going to fix itself, and it usually gets more expensive the longer it waits. We’re local, we weld on site, we price upfront, and we back the work with the 90-Day Done Right Promise in writing. You can drive to the shop and look us in the eye, or you can call and we’ll be at your gate. Either way, the name is on the shop and the shop is down the road. Call (833) 780-1547 for a free estimate today.

Written by the team at Gatewood Fence & Gate Enterprise, serving Enterprise and nearby areas.

What Our Customers Say

★★★★★ 4.9 from 7+ reviews

"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."

- Ingrid Solheim

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

- Winston Achterberg

"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."

- Salvador Arredondo
Need Gate Repair help in Enterprise? Licensed & insured · 30-60 min response · free estimates
Call (833) 780-1547

Request a Free Estimate

Tell us what's going on in Enterprise. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch