Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Henderson
If a gate on your Henderson property is dragging, sagging, or stuck, we can help. We’re a locally owned gate specialist, and Henderson is core service territory for us, which means fast response to Green Valley, Anthem, Seven Hills, and the older streets around Water Street. We know why gates fail here: desert soil shifts, the sun bakes hardware and operators, and HOA design rules limit what a repair is allowed to change. That last part matters more in Henderson than almost anywhere else in the valley. Call (833) 780-1547 and a live person picks up, any hour.
Why Gatewood Fence & Gate Enterprise Is Henderson’s Preferred Gate Parts & Welding Company
We repair what other outfits want to replace. On Henderson gates, that often means re-welding a rail, re-hanging a leaf, or re-setting a footing instead of selling a whole new gate. Our technicians have up to 25 years of experience, and every job carries our 90-Day Done Right Promise in writing: if it isn’t done right, we make it right. No runaround.
Henderson homeowners know how the big national operations work, because many of you have already lived through it. Someone quotes a number over the phone, a different number shows up at the door. We don’t operate that way. We quote and agree the price before any work starts, and we answer the phone with a live person around the clock, not a queue three states away.
Response to Henderson is fast, and we keep standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. It’s the same offer for everyone, every time.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Henderson
Most of the calls we take in Henderson come down to metal hardware and old posts, not the panel itself. These four repairs cover the bulk of it, and we handle all of them on our Gate Parts & Welding service. The work happens on site, in your driveway, so the gate never leaves.
Post Replacement
A gate sags in the hinge post, not in the middle. That’s where we start. Around Anthem and Seven Hills, expansive desert soils dry, settle, and pull footings out of plumb, so we re-set and re-plumb the footing before we touch anything else. Fix the panel without the post and you’ll fix it twice.

Hinge Replacement
Worn hinges on a wrought-iron gate usually follow a post that’s been out of alignment for a while, grinding the pin and barrel every swing. We replace and re-set hinges to match the gate’s original look, which matters in Henderson’s master-planned communities where hardware style is part of the HOA’s approved appearance.

Rail Repair
Flash-rusting after a monsoon downpour or a rare winter freeze weakens rails before homeowners notice. We weld rails back to sound condition on site and treat the bare steel so it stops rusting in the same spot. Custom rail profiles are no problem.

Custom Welding
Custom welding covers everything from a bent drive gate leaf to a new side-yard frame built to match an older ornamental steel pattern. We carry the approved HOA paint palette for Henderson communities, so a repair that changes finish color still passes design review. Tell us the association and we’ll match it.
Trusted Brands We Service in Henderson
We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, and Mighty Mule. Many Henderson homes run older operators from these makers, and parts are still obtainable for far more of them than people expect. We don’t claim to keep a parts warehouse; what we do is diagnose accurately, then pull the right component and get it back on the gate fast. A baked control board doesn’t mean the gate needs replacing. It usually means one part.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Henderson Homes
Here’s what we run into most in Henderson, roughly in order of frequency:
- Hinge posts out of plumb. As expansive desert soils settle around Anthem and Seven Hills lots, the footing shifts and the gate drags while the panel itself is still straight. This is the single most misunderstood gate problem in Henderson.
- Baked control boards and dried seals on older operators. Years of 100°F-plus UV exposure leave a LiftMaster, FAAC, BFT, or Linear unit unresponsive or reversing erratically. The fault is usually the board or the rack and pinion, not the whole operator.
- Post-monsoon misalignment. A heavy downpour or a rare hard freeze throws a gate out of alignment and flash-rusts bare steel overnight. A repair that misses the underlying post movement fails twice.
- Hinge wear on older gates hung before modern safety requirements existed. An older gate can still be brought up to a safe standard with the right hardware and entrapment protection, but the retrofit has to be planned, not improvised.
Pricing for Gate Parts & Welding in Henderson, NV
We give honest ranges, not “it depends.” A hinge replacement on a wrought-iron Henderson gate typically runs $180 – $350. Post replacement with re-set footing runs $400 – $900, more where a footing has to be broken out and re-poured. Rail repair with on-site welding runs $150 – $450 depending on rust and access. Custom welding starts around $300. Retrofitting entrapment protection to an older operator runs $250 – $600. Every price is quoted and agreed before any work starts, so the number you hear is the number you pay. Estimates are free, and a second opinion on a written estimate costs nothing. Ask about the $40 off any repair over $200.
We Also Serve Cities Near Henderson
We cover Henderson neighborhoods across ZIP codes 89015, 89002, 89052, and 89009, and we also serve Boulder City, Whitney, Paradise, and Enterprise. If you’re right on the edge of town, call and we’ll confirm coverage for Gate Parts & Welding in Henderson and the surrounding communities. Same promise, same upfront pricing, same 90-Day Done Right Promise. The name is on the shop, and the shop is down the road.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Henderson
It’s almost always the post. A gate sags at the hinge post, not in the middle, and on Henderson’s expansive desert soils the footing settles and goes out of plumb long before the hinge itself fails. We check the post first and re-plumb before re-hanging. Call (833) 780-1547 and we’ll take a look.
Usually yes. Sustained 100°F-plus UV and near-zero humidity bake control boards and dry out seals on older LiftMaster, FAAC, and BFT operators, but that’s a component failure, not a dead unit. Diagnostics tell us whether it’s the board, the rack and pinion, or the photocells before we recommend parts. Call for a free estimate before you write off the operator.
In most cases, yes. A gate hung before modern safety requirements existed can usually be brought up to standard with the right hardware and entrapment protection, and that’s cheaper than a new gate in most cases. It has to be planned around your existing operator and leaf weight. Call us to schedule a look.
It can if the hardware or finish doesn’t match the association’s approved look. Henderson’s master-planned communities, especially around Green Valley and Anthem, enforce uniform gate colors and styles, so a sound weld can still trigger a violation letter if the hinge style changes. We match the approved palette and hardware. Tell us your association and we’ll work around it.
Repair is usually cheaper when the post or the panel has a single failure. A re-set post with new hinges runs $400 – $900, while a full replacement on a 1990s Henderson gate runs several times that. Replacement wins when the frame has widespread rust or the operator and gate both fail at once. Call (833) 780-1547 for a free, no-pressure estimate.
If your gate is dragging, stuck, or rusting, call Gatewood Fence & Gate Enterprise at (833) 780-1547 for a free estimate. We repair first, weld on site, and back every job with the 90-Day Done Right Promise in writing.
Written by the team at Gatewood Fence & Gate Enterprise.