Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Paradise
If a gate in Paradise has stopped behaving – binding on its track, dragging at the hinge, sagging until it scrapes concrete – you don’t need a sales pitch. You need someone who knows this corridor and can weld it back into shape on site. We know Paradise, from the resort properties along the Strip to the apartment and townhome enclaves tucked just behind them, and we know that most gate work here happens in tight spaces with traffic still moving. Call (833) 780-1547 and a live person picks up, day or night. Upfront pricing, free estimates, and a 90-Day Done Right Promise in writing on every job.
Why Gatewood Fence & Gate Enterprise Is Paradise’s Preferred Gate Parts & Welding Company
Paradise is unincorporated, which means it doesn’t have the tidy single-family subdivisions a lot of surrounding towns do. Most of the gates here are commercial slide gates, parking barriers, and shared community entries – and they take a beating. We’ve built our reputation on being the company that repairs what others want to replace, welding on site so the gate stays in your driveway or entryway instead of being hauled off for a week.
Our technicians have up to 25 years of experience, and they’re certified to service nine major gate brands. We’re locally owned and owner-operated, insured and bonded, and every call is answered by a live person around the clock – not a voicemail, not a queue three states away. When a Paradise property manager or HOA board needs a gate part replaced and certifiably safe again, we show up in the window we promised. That reliability is what turns a first call into a standing relationship.
Our response into Paradise is prompt – same-day for repairs and emergencies in most cases – and we don’t charge a trip charge inside the county. If you have a written estimate from someone else, we’ll give you a free second opinion on it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Paradise
Our Gate Parts & Welding team covers the repairs that matter most on tight Paradise sites, where a swing gate arc often won’t fit and every inch of working space counts.
Gate Rollers in Paradise
Blowing Mojave grit packs into tracks and eats rollers faster here than almost anywhere. On a tightly fitted slide gate, worn rollers make the gate bind, and the operator just keeps pushing until the motor heat climbs. We replace the rollers, clear and re-align the track, then return the gate to service with traffic still flowing.

Hinge Replacement in Paradise
A gate sags at the hinge post, not in the middle – and that’s where we start. On shared community and driveway gates getting constant vehicle and foot traffic, loose hinges and footing movement are the usual culprits. Fix the panel without the post and you’ll fix it twice, so we address the hinge and footing together.

Rail Repair in Paradise
Rails take the load on any gate, and a bent or cracked rail on a parking-facility entry can throw the whole gate out of square. We straighten or replace damaged rail sections and weld them back to true, keeping the entry usable throughout.

Custom Welding in Paradise
Some gates here are one-off fabrications that no catalog part will fit, especially in restricted rights of way where a standard gate was modified to squeeze in. We weld on site – repairs, reinforcements, custom brackets and mounts – so the gate never leaves the property. That’s the whole idea: keep the gate in place and keep it working.
Trusted Brands We Service in Paradise
We’re certified to service nine major gate brands, and on Paradise commercial and community gates that usually means LiftMaster and FAAC operators on high-cycle slide gates, plus Mighty Mule and BFT on lighter residential and enclave entries. We don’t stock parts on a truck, so we won’t promise a part is on hand this minute – but we source what your operator needs and turn it around fast. Tell us the brand and model and we’ll tell you what to expect.
Common Gate Parts & Welding Problems We See in Paradise Homes
- Track-and-roller binding from wind-driven dust. On slide gates squeezed into rights of way where there’s no room for a swing arc, blowing grit packs the track and wears the rollers until the gate drags and the motor strains.
- Hinge post loosening on shared entries. Community and driveway gates here see near-constant vehicle and pedestrian traffic, and the footing gradually moves, dropping the gate until it scrapes.
- Operator motor heat and gear wear. Because so much of Paradise’s gate infrastructure sits behind casino-hotels and parking facilities, operators run near-continuously, so heat and gear wear – not weather damage – are the failure mode we see most.
- Sun-cooked lubricants, seals, and photo-eye lenses. The desert sun degrades rubber seals and fogs plastic lenses over time, so photo-eyes and safety edges start false-tripping and the gate stops mid-travel.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Parts & Welding in Paradise, NV
Paradise’s market runs a little higher than outlying towns for commercial and high-cycle equipment, and we quote and agree the price before any work starts, so the invoice matches the number you were given. A typical roller replacement in Paradise runs $95 – $220 per gate; a hinge or hinge-post repair runs $150 – $325; rail repair and straightening runs $120 – $300; and on-site custom welding runs $110 – $285 depending on the fabrication. Track realignment on a bound slide gate usually lands $140 – $340. A written estimate is free, there’s $40 off any repair over $200, seniors and veterans get a permanent 10% discount, and there’s no trip charge inside the county.
We Also Serve Cities Near Paradise
Paradise sits close to a lot of neighbors, and we cover them too – Winchester, Whitney, Spring Valley, and Enterprise. If your gate is just outside the corridor, we’ll come to you the same way we serve Gate Parts & Welding in Paradise and the surrounding communities. One call covers the whole area.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Paradise
Yes – on tight Paradise sites we work the gate in place and keep vehicle and pedestrian access live while we do it. That means staged work, clear signing, and a plan to keep the entry usable rather than shutting the whole right of way for a day. Call (833) 780-1547 for an exact quote – estimates are free.
Because the summer sun bakes the lubricants and seals while blowing grit packs the track, so the gate fights itself more in the heat. The operator compensates and the motor runs hotter, which is when binding turns into a breakdown. We clear the track, replace worn rollers, and check the safety devices before returning the gate to service. Call for a free estimate.
It’s almost always the hinge post, not the panel. On a shared driveway or community entry, the footing moves and the gate drops at the hinge. Fix the panel without the post and you’ll fix it twice, so we address both. Call (833) 780-1547 for a free estimate.
Yes – any time we touch the operator or its safety devices, we confirm entrapment protection under UL 325 is working before returning the gate to service. Photo-eyes and safety edges are a duty of care, not an optional extra. Call for an exact quote – estimates are free.
We’re certified to service nine major brands, including LiftMaster, FAAC, BFT, and Mighty Mule, and can source parts for the commercial operators common on Strip-corridor parking and community gates. Tell us the model and we’ll confirm availability and turnaround. Call (833) 780-1547 for a free estimate.
Get a Free Gate Parts & Welding Estimate in Paradise
Whether it’s a bound slide gate behind a parking facility, a sagging hinge on a shared driveway, or a custom weld in a tight right of way, we’ll come look, tell you straight what’s wrong, and put the price in writing before we start. Call (833) 780-1547 for a free estimate – a live person answers around the clock, and every job carries our 90-Day Done Right Promise.
Written by the team at Gatewood Fence & Gate Enterprise.