Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Henderson
If you live in Henderson and your gate has started dragging, sticking, or refusing to open all the way, you’re in the right place. We install and replace driveway gates, pedestrian gates, sliding gates, and swing gates throughout Henderson, from the master-planned streets of Green Valley and Anthem to the older single-story homes near Water Street and the historic downtown core. We know this city’s gates because we work on them constantly: the wrought-iron and ornamental steel that dominate here, the HOA rules that govern what your gate can look like, and the desert soils that quietly throw posts out of plumb. Call (833) 780-1547 and a live person picks up, day or night.
Why Gatewood Fence & Gate Enterprise Is Henderson’s Preferred Gate Installation Company
Henderson homeowners have been burned before. A national outfit quotes one price on the phone, then a different one shows up at the door. We built our name on the opposite: upfront pricing agreed before any work starts, a published license number anyone can look up, and the 90-Day Done Right Promise stamped in writing on every job. If something isn’t right, one call brings us back. No runaround, no answering machine.
We’re locally owned and owner-operated, and Henderson is home ground. Our technicians have up to 25 years of experience and are certified to service nine major gate brands, including LiftMaster, FAAC, BFT, and Mighty Mule. That matters in a city where metal hardware and automatic operators carry most of the load. When we quote a job in ZIP 89052 or 89015, the number reflects what gates actually cost here, not a guess pulled from another market.
Calls are answered by a live person 24/7, and we keep standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Installation Services in Henderson
Every gate installation in Henderson starts with a walk of your property and an honest answer about what you actually need. Here’s where most of our work lands.
Driveway Gate Installation in Henderson
Driveway gates are the big-ticket item in Henderson, and most of the calls we get come from homes with an older gate that’s reached the end of its road. We install ornamental steel and wrought-iron swing and slide gates sized to your driveway, matched to your home, and, in HOA communities, matched to the association’s approved palette before anything is ordered. If your current gate is salvageable, we’ll tell you. If it isn’t, we’ll show you why.

Pedestrian Gate Installation in Henderson
Side-yard and pedestrian gates take a beating from desert sun and get less attention than the driveway. We install steel pedestrian gates with proper hinges, latches, and posts set deep enough to hold through the soil movement this valley sees. In Seven Hills and Anthem, where lots sit near trails and open ground, we pay extra attention to post depth and alignment so the gate doesn’t sag a year after it’s hung.

Sliding Gate Installation in Henderson
Sliding gates suit tighter Henderson driveways where a swing gate would arc into the street or a neighbor’s wall. We install and replace sliding gates with V-track or cantilever systems, and we check the ground beneath the track before committing, because settled or shifting soil can throw a track out of level within a season. A sliding gate that runs true is a matter of getting the foundation right the first time.

Swing Gate Installation in Henderson
Swing gates are the traditional choice here, and the most common failure we see isn’t the gate itself; it’s the hinge post. In Henderson’s expansive desert soils, posts settle and shift, so a gate that looks fine starts dragging within a couple of years. When we install a swing gate, we re-check the post and set it correctly for the soil, not just the gate.
Trusted Brands We Service in Henderson
Henderson’s automatic gates run on a handful of operators, and we’re certified to service nine of the major brands, including LiftMaster, FAAC, BFT, and Mighty Mule. We don’t keep a parts warehouse and we won’t pretend to. What we do is diagnose honestly, order the right part, and come back with a written price before anything gets swapped. If your operator can be retrofitted with a modern control board and safety photocells, that’s often the cheaper path; if the board is obsolete and the motor is tired, we’ll say so plainly.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Henderson Homes
Not every call is a job that needs a whole new gate. Here’s what we find most often.
- Old control boards failing in the heat. Pre-2000s gate operators in Henderson bake under sustained 100°F-plus summer sun, and their control boards give out. A gate that’s stuck open or closed in July is usually a board or capacitor issue, not a mystery.
- Hinge posts settling in desert soils. In Anthem and Seven Hills, the expansive soil dries, settles, and pulls posts out of plumb. A swing gate starts to drag, the operator strains, and the whole system wears out faster than it should.
- UV-faded finishes and dry-rotted seals. That intense Mojave sun fades powder-coat and dries out the seals on automatic openers. After a monsoon, we see flash rust on hardware and electrical faults where water got into a worn seal.
- Gates hung before modern safety rules. Older Henderson gates often lack safety photocells or reversing edges. If a child or pet can get under a moving gate, that’s a safety gap we flag on the first visit.
Pricing for Gate Installation in Henderson, NV
Here’s what gate installation actually runs in Henderson’s market, so you can plan rather than guess. A pedestrian gate install typically lands around $450 – $900, a basic driveway swing gate runs $1,200 – $2,800, a sliding gate installation runs $2,500 – $6,000, and adding or replacing an automatic operator with safety photocells runs $700 – $1,800 depending on the unit. Those ranges shift with gate width, material, post requirements, and whether your HOA requires a custom finish. Every job gets a free on-site measure and a written price you agree to before we touch a thing. The number on the estimate is the number on the invoice.
We Also Serve Cities Near Henderson
Henderson sits close to a lot of smaller communities, and we work them too. If you’re just outside our main coverage or moving into a home near Boulder City, Whitney, Paradise, or Enterprise, give us a call. Our Gate Installation in Henderson team knows the roads and the local rules, and we’re glad to help neighbors across the county line. See the full range of what we do on our Gate Installation service page.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Henderson
Yes. We check your HOA’s design-review palette before your gate is ordered, so the new one matches the approved look and you don’t risk a violation letter. Green Valley and Anthem associations enforce specific colors and styles, and we factor that into the order, not after the fact.
It comes down to the control board, the motor, and the safety features. If the board is still supported and the motor is sound, a modern control-board upgrade with safety photocells is usually the cheaper answer. If the board is obsolete or the motor is tired, replacement is the smarter spend. We’ll give you both numbers and let you decide.
Most drag in Henderson is the hinge post, not the operator. Expansive desert soils dry and settle, pulling the post out of plumb so the gate sags and the operator strains. A re-plumb and sag correction often fixes it before the operator wears out.
LiftMaster, FAAC, BFT, and Mighty Mule turn up most often on Henderson automatic gates, alongside Linear, Viking, DoorKing, Elite, and Ghost Controls. We’re certified to service all nine, so there’s a good chance we already know your unit.
Yes. Any automatic gate that moves should have working safety photocells or a reversing edge, and older gates here often don’t. Those safety gaps are something we flag on every visit, because a gate that closes on a child or pet is a real hazard.
Written by the team at Gatewood Fence & Gate Enterprise.