A Gatewood company - serving Enterprise, NV
Gate Parts & Welding in Henderson, NV | Gatewood Fence & Gate Enterprise - Gatewood Fence & Gate Enterprise

Gate Parts & Welding in Henderson - Made to Measure, Written Price

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Henderson

If a gate on your Henderson property is dragging, sagging, or stuck, we can help. We’re a locally owned gate specialist, and Henderson is core service territory for us, which means fast response to Green Valley, Anthem, Seven Hills, and the older streets around Water Street. We know why gates fail here: desert soil shifts, the sun bakes hardware and operators, and HOA design rules limit what a repair is allowed to change. That last part matters more in Henderson than almost anywhere else in the valley. Call (833) 780-1547 and a live person picks up, any hour.

Call (833) 780-1547

Why Gatewood Fence & Gate Enterprise Is Henderson’s Preferred Gate Parts & Welding Company

We repair what other outfits want to replace. On Henderson gates, that often means re-welding a rail, re-hanging a leaf, or re-setting a footing instead of selling a whole new gate. Our technicians have up to 25 years of experience, and every job carries our 90-Day Done Right Promise in writing: if it isn’t done right, we make it right. No runaround.

Henderson homeowners know how the big national operations work, because many of you have already lived through it. Someone quotes a number over the phone, a different number shows up at the door. We don’t operate that way. We quote and agree the price before any work starts, and we answer the phone with a live person around the clock, not a queue three states away.

Response to Henderson is fast, and we keep standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. It’s the same offer for everyone, every time.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Henderson

Most of the calls we take in Henderson come down to metal hardware and old posts, not the panel itself. These four repairs cover the bulk of it, and we handle all of them on our Gate Parts & Welding service. The work happens on site, in your driveway, so the gate never leaves.

Post Replacement

A gate sags in the hinge post, not in the middle. That’s where we start. Around Anthem and Seven Hills, expansive desert soils dry, settle, and pull footings out of plumb, so we re-set and re-plumb the footing before we touch anything else. Fix the panel without the post and you’ll fix it twice.

Post Replacement

Hinge Replacement

Worn hinges on a wrought-iron gate usually follow a post that’s been out of alignment for a while, grinding the pin and barrel every swing. We replace and re-set hinges to match the gate’s original look, which matters in Henderson’s master-planned communities where hardware style is part of the HOA’s approved appearance.

Hinge Replacement

Rail Repair

Flash-rusting after a monsoon downpour or a rare winter freeze weakens rails before homeowners notice. We weld rails back to sound condition on site and treat the bare steel so it stops rusting in the same spot. Custom rail profiles are no problem.

Rail Repair

Custom Welding

Custom welding covers everything from a bent drive gate leaf to a new side-yard frame built to match an older ornamental steel pattern. We carry the approved HOA paint palette for Henderson communities, so a repair that changes finish color still passes design review. Tell us the association and we’ll match it.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (833) 780-1547

Trusted Brands We Service in Henderson

We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, and Mighty Mule. Many Henderson homes run older operators from these makers, and parts are still obtainable for far more of them than people expect. We don’t claim to keep a parts warehouse; what we do is diagnose accurately, then pull the right component and get it back on the gate fast. A baked control board doesn’t mean the gate needs replacing. It usually means one part.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Parts & Welding Problems We See in Henderson Homes

Here’s what we run into most in Henderson, roughly in order of frequency:

  • Hinge posts out of plumb. As expansive desert soils settle around Anthem and Seven Hills lots, the footing shifts and the gate drags while the panel itself is still straight. This is the single most misunderstood gate problem in Henderson.
  • Baked control boards and dried seals on older operators. Years of 100°F-plus UV exposure leave a LiftMaster, FAAC, BFT, or Linear unit unresponsive or reversing erratically. The fault is usually the board or the rack and pinion, not the whole operator.
  • Post-monsoon misalignment. A heavy downpour or a rare hard freeze throws a gate out of alignment and flash-rusts bare steel overnight. A repair that misses the underlying post movement fails twice.
  • Hinge wear on older gates hung before modern safety requirements existed. An older gate can still be brought up to a safe standard with the right hardware and entrapment protection, but the retrofit has to be planned, not improvised.

Pricing for Gate Parts & Welding in Henderson, NV

We give honest ranges, not “it depends.” A hinge replacement on a wrought-iron Henderson gate typically runs $180 – $350. Post replacement with re-set footing runs $400 – $900, more where a footing has to be broken out and re-poured. Rail repair with on-site welding runs $150 – $450 depending on rust and access. Custom welding starts around $300. Retrofitting entrapment protection to an older operator runs $250 – $600. Every price is quoted and agreed before any work starts, so the number you hear is the number you pay. Estimates are free, and a second opinion on a written estimate costs nothing. Ask about the $40 off any repair over $200.

We Also Serve Cities Near Henderson

We cover Henderson neighborhoods across ZIP codes 89015, 89002, 89052, and 89009, and we also serve Boulder City, Whitney, Paradise, and Enterprise. If you’re right on the edge of town, call and we’ll confirm coverage for Gate Parts & Welding in Henderson and the surrounding communities. Same promise, same upfront pricing, same 90-Day Done Right Promise. The name is on the shop, and the shop is down the road.

Serving Henderson, NV – Our Local Coverage Area

We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Henderson

Why Henderson Chooses Gatewood Fence & Gate Enterprise

We set the standard for gate parts & welding in Henderson.

30-60 Min Response

Fast dispatch across Henderson. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Henderson

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Henderson - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 30-60 min.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Henderson Customers Say

Trusted by homeowners across Henderson and surrounding areas.

★★★★★

"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."

Ingrid Solheim
★★★★★

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

Winston Achterberg
★★★★★

"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."

Salvador Arredondo

Ready for Gate Parts & Welding in Henderson?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Henderson.

(833) 780-1547

Request a Free Estimate in Henderson

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch