Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Whitney
If you’re installing a gate on a Whitney property, you’re dealing with unincorporated Clark County rules, an older housing stock, and a desert that punishes hardware. That combination is exactly what we work in every day. Gatewood Fence & Gate Enterprise knows the 89122 ZIP and the tract neighborhoods around it, from the block-wall side yards off Sahara Avenue to the older driveways near Hollywood Boulevard. We answer the phone with a live person any hour, and our technicians bring up to 25 years of experience to every job. Free estimates, and the price you agree to before we start is the price you pay. Call (833) 780-1547 and tell us what you’re trying to build or replace.
Why Gatewood Fence & Gate Enterprise Is Whitney’s Preferred Gate Installation Company
Whitney homeowners tend to be practical people who’ve been burned before. A national outfit quotes one number on the phone, another when the crew shows up, and then the gate still doesn’t latch. We’re built to be the opposite of that. We’re locally owned and owner-operated, our name is on the shop, and our crews are background-checked and uniformed so you know who’s on your property. Every job carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back.
On response time, Whitney is a quick run up the east valley, so scheduling a measure and getting a written price doesn’t mean waiting weeks. We also don’t hand you a phone tree. A live person answers 24 hours a day, seven days a week, not voicemail and not a call center three states away. And because so much of Whitney’s housing dates to the 1980s through the 2000s, we know the gate hardware that came with those homes and what it takes to fit something that outlasts it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Installation Services in Whitney
The right gate for a Whitney lot depends on what it has to do: keep a car in, keep a pool safe, or let a trailer through a block-wall side yard without dragging. We install all of it, and we size the frame and hardware to the sun and dust here rather than to a generic catalog spec.
Driveway Gate Installation in Whitney
A driveway gate on a Whitney tract home usually has to span a poured or block-wall opening where the original builder-grade hardware is already tired. We set a solid hinge post, hang a galvanised or powder-coated frame, and fit stainless hinges and fasteners so the UV and grit don’t win in two summers. If you’re covering an RV pad, we spec the gate heavier from the start.

Pedestrian Gate Installation in Whitney
Walk gates and pool-safety gates are common requests in the 89122 neighborhoods, especially on homes with backyard pools. We fit self-closing, self-latching hardware where the safety code calls for it, and we set the post deep enough that it won’t shift and throw the latch off. Small gate, but the hardware matters.

Sliding Gate Installation in Whitney
The sliding gate is a Whitney staple because it doesn’t need swing clearance on a tight lot. We set a proper track or cantilever base, align the rack and pinion so monsoon dust doesn’t jam it, and pair it with a correctly sized operator. For a trailer-width opening, this is often the only gate that fits.

Swing Gate Installation in Whitney
Single and double swing gates are everywhere on the heavier RV and boat side-yards here, and they take the worst of the summer heat. We build the frame to resist warping, use stainless hinges, and check that it swings and latches cleanly through the full arc before we call it done. If it’s going automatic, we add the safety sensors at the same time.
Trusted Brands We Service in Whitney
We’re certified to service nine major gate brands, and on Whitney installs you’ll most often see us working with LiftMaster, FAAC, Elite, and Mighty Mule operators depending on the gate’s weight and how the homeowner wants to open it. We don’t claim to stock every part locally, so we’re straight with you about lead times on a branded operator or controller. What we do promise is that the gate and the operator are matched correctly and the entrapment protection is in place before we hand you the remote.
Common Gate Installation Problems We See in Whitney Homes
- Hinge-post movement on older 89122 driveway gates. A builder-grade wrought-iron or chain-link gate from the 1990s often reaches the point where the hinge post has shifted in the block-wall footing and the panel drags or won’t latch. The sag is in the post, not the gate, so the footing gets reset or replaced before a new frame goes up.
- UV-baked finishes and warped frames. Summer highs routinely climb past 105°F here, and that bakes gate frames and finishes and cooks operator electronics and batteries. Heavier RV and side-yard swing and slide gates feel it worst.
- Monsoon grit in the moving parts. Seasonal wind and dust storms pack hinges, latches, and rack and pinion with grit, jamming gates and wearing operator components early. A properly protected setup handles it; a cheap one doesn’t.
- Footing and post failure under extra weight. When a homeowner widens a driveway for a trailer, the heavier gate on a small block-wall lot is the first thing to fail. The fix starts at the footing, not the panel.
See the difference
Before
After
Before
After
Before
AfterWhy Whitney Permitting Changes How the Job Gets Done
Here’s the part most homeowners don’t realize until they’re mid-project. Whitney sits in unincorporated Clark County, not inside Las Vegas city limits, so gate and fence work is permitted and inspected under Clark County code. That means a driveway or pool gate replacement that would be a simple swap elsewhere can require county permits, and any new automatic operator has to meet UL 325 entrapment-protection requirements. We build that into the plan from the first call so there are no surprises at inspection. It’s a quieter, less obvious difference than price, but it decides whether the job passes clean.
Pricing for Gate Installation in Whitney, NV
Honest numbers help more than a vague “it depends.” A typical pedestrian or pool-safety gate installation in Whitney runs $600 to $1,400. A standard single driveway swing gate lands around $1,800 to $3,500, while a heavier double swing or RV side-yard gate runs $3,000 to $6,500. Sliding gates with a track or cantilever base start around $2,500 and climb toward $7,000 for a wide trailer opening. Operator and automation adds roughly $900 to $2,500 depending on the brand and the safety devices required. Every price is quoted and agreed before any work starts. Estimates are free, and we’ll give you a second opinion on any written estimate you already have.
We Also Serve Cities Near Whitney
Whitney sits close to a lot of the east and central valley, so we cover the surrounding communities too. Along with Gate Installation in Whitney, we take on work in Sunrise Manor, Winchester, Paradise, and Las Vegas. If you’re near the edges of the 89122 ZIP and not sure whether you’re in our area, call and ask. For the full scope of what we do, see our Gate Installation service page.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Whitney
Often, yes. Because Whitney is in unincorporated Clark County rather than Las Vegas city limits, gate and fence work falls under county permitting, and a new automatic operator has to pass entrapment-protection checks. We walk you through what your specific project needs before we start. Call (833) 780-1547 for a free estimate and a straight answer on permits.
For most Whitney driveways, a heavier-gauge steel frame with a galvanised or powder-coated finish and stainless hinges and fasteners holds up best against the UV and the grit. The dry climate keeps rust slow, but the sun is relentless, so the finish is what decides how the gate looks in five years. Call us and we’ll spec it to your opening.
Sometimes the sag is really in the hinge post and footing, not the panel, so re-hanging alone won’t hold. On Whitney’s older 89122 lots, the block-wall footing has often shifted under the extra weight of a trailer-width gate. We check the post first, because fixing the panel without the post means you’ll fix it twice. Call for a free estimate.
Any new automatic operator has to meet UL 325 entrapment-protection requirements, which means working safety devices like photocells and, where the gate calls for it, loop detectors. We install and test those as part of the job. Call (833) 780-1547 and we’ll walk you through what your gate needs.
A correctly sized solar opener can hold up, but the heat here cooks batteries and boards, so brand and sizing matter more than people expect. We favor proven units and set them so the panel and controller aren’t fighting the sun. Ask us for a free estimate and we’ll match the operator to your gate.
Whether you need a simple walk gate or a full trailer-width slide gate for an RV pad, we’ll give you a written price, a working safety setup, and a gate built for Whitney’s heat and dust. Call (833) 780-1547 for a free estimate. A live person answers, and the price we quote is the price you pay.
Written by the team at Gatewood Fence & Gate Enterprise.