Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Whitney
If your driveway gate is dragging, humming, or stuck half-open, we can help. We handle gate repair across Whitney, NV, including the 89122 neighborhoods off Sahara Avenue and the streets feeding into Sam Boyd Stadium, and we know exactly what the desert does to a gate that has been hanging out in the sun for twenty years. Most of the gates we see here are original builder-grade hardware on tract homes from the 80s and 90s, and they all tend to fail the same way. Call (833) 780-1547 and a live person picks up.
Why Gatewood Fence & Gate Enterprise Is Whitney’s Preferred Gate Repair Company
We’re an owner-operated gate shop, which means the person who answers the phone is the person who stands behind the work. Repairs carry our 90-Day Done Right Promise in writing, and if something we touched goes wrong, one call brings us back. No call centers, no dispatch queue three states away.
Whitney homeowners have been burned before. A national outfit quotes one number on the phone and a bigger number at the door, then tries to sell a full replacement when a hinge post was the real problem. We start with a free second opinion on any written estimate you already have, and we quote a firm price before we touch anything. Our technicians have up to 25 years of experience, and they’re background-checked and certified to service nine major gate brands.
We also know this corner of the east valley. We work under Clark County code here, not City of Las Vegas rules, and pay attention to how the RV gates and block-wall lots around Whitney actually fail. That local familiarity is why people call us back. If you’re comparing options, our Gate Repair team handles everything from hinge work to operator diagnostics.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Whitney
Hinge & Post Repair
A gate sags in the hinge post, not the middle. That’s where we start every sag call in Whitney. On older lots, the post footing has shifted in the desert soil and heat-cycled hardware has loosened the swing, so we check plumb first and rebuild hinges and latches only after the post is sound. Fix the panel without the post and you’ll fix it twice.

Automatic Gate Repair
We repair automatic and swing operators across Whitney, from LiftMaster units to older FAAC arms that have been baking in the sun since the Clinton administration. Heat over 105°F kills batteries and cooks control boards faster here than almost anywhere. If your operator has quit, we diagnose whether it’s the board, the motor, or the safety loop before we suggest anything new.

Gate Realignment
A gate that drags or scrapes is usually out of plumb, not broken. We realign swing and slide gates on Whitney properties, adjusting hinge geometry and track so the gate swings free and latches clean. This is the repair that saves a lot of gates from being replaced before their time.

Electric Gate Repair
Electric gate problems on Whitney’s older tract homes often trace back to wiring that was run years ago and a control system that no longer matches modern standards. We troubleshoot the actual fault, whether that’s a dead keypad, a shorted loop, or a motor that’s drawing too much current. Show us the gate closing on its own and we’ll show you where it’s failing.
Trusted Brands We Service in Whitney
We’re certified to service nine major gate brands, including LiftMaster, FAAC, Elite, and Mighty Mule. We don’t keep a warehouse of parts, so don’t expect us to swap in a control board the same day from local stock. What we do instead is bring the right diagnosis and order exactly what your gate needs, often within a day or two. Turnaround on common repairs is quick, and you’ll always know the price before we order a thing.
Common Gate Repair Problems We See in Whitney Homes
- Sagging RV side-yard gates. Whitney’s block-wall lots push homeowners to widen driveways for trailers and boats, and those heavier swing and slide gates are the first to drop. The sag almost always traces back to a shifted hinge post footing, not the panel itself.
- Heat-killed operators and control boards. Summer highs over 105°F cook batteries and legacy control boards on twenty- to thirty-year-old units. When the board is obsolete, the honest answer is often a modern operator instead of chasing parts.
- Monsoon-bent frames and jammed latches. Seasonal wind and dust storms pack grit into hinges and can tweak older wrought-iron and chain-link gates out of alignment. What was a smooth swing in April drags by August.
- UV-baked finishes and brittle hardware. The dry climate slows rust compared to the coast, but relentless sun destroys finishes and makes builder-grade hinges and latches brittle. They snap instead of bending when they finally go.
Pricing for Gate Repair in Whitney, NV
A typical hinge and post repair in Whitney runs $180 – $420, and a simple gate realignment is usually $150 – $300. Automatic operator diagnostics start around $120, with control board or motor repairs commonly $250 – $650 depending on the brand. Full operator replacement on an aged legacy unit often lands $900 – $2,200 installed. What moves the price is post condition, gate weight, and whether we’re working on a sun-baked 30-year-old unit or something newer. We quote and agree the price before any work starts, so the number on the estimate is the number on the bill.
Standing offers we honor in Whitney: $40 off any repair over $200, no trip charge inside Clark County, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
See the difference
Before
After
Before
After
Before
AfterRetrofit or Replace? The Honest Math for Whitney’s Older Gates
Here’s the part most gate companies skip. Whitney is unincorporated Clark County, not inside Las Vegas city limits, and that changes how gate and fence work gets permitted. A replacement gate or a new operator on a Whitney block-wall lot follows a different review path than the same job a few miles west inside the city. We know that difference and plan for it.
On a typical 1990s Whitney tract lot, a heavy RV side-yard swing gate has been sagging for a season or two and the owner blames the panel. The real culprit is usually the hinge post, whose footing has shifted in the desert soil and heat-cycled hardware. A qualified pro checks plumb at the post, corrects the sag, and only then rebuilds hinges and latches. When the operator is a legacy unit, a dead control board or heat-killed battery often makes retrofit uneconomical compared with a modern UL 325-compliant operator with working safety photocells.
So when is retrofit worth it? If the operator’s mechanicals and wiring are sound and only the control board or battery has failed, we repair it. If the unit predates modern safety requirements and the board is obsolete, replacement is usually the cheaper answer over the long haul, and safer. We’ll tell you which side of that line your gate is on before you spend a dollar.
We Also Serve Cities Near Whitney
We cover Whitney and the surrounding east valley, including Sunrise Manor, Winchester, Paradise, and Las Vegas. If you’re just outside the 89122 ZIP and want Gate Repair in Whitney or the neighboring communities, give us a call and we’ll confirm coverage. Same upfront pricing, same written promise.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Whitney
The hinge post footing has usually shifted, not the panel. On Whitney’s desert soil and heat-cycled hardware, the post loses plumb and the gate drops at the hinge. A pro checks plumb at the post first, corrects the sag, then rebuilds hinges and latches. Call (833) 780-1547 for a free estimate.
Sometimes, yes, but it depends on the operator. If the mechanicals and wiring are sound and only a battery or control board failed, a retrofit makes sense. If the unit predates modern safety requirements and the board is obsolete, replacement is usually cheaper and safer. We’ll give you the honest call either way.
Clark County code governs it, because Whitney is unincorporated county territory rather than inside Las Vegas city limits. A replacement gate or new operator follows a county review path, which is different from the same job inside the city. We know that difference and plan the work around it.
They’re heavier and take more of a beating than a standard gate. Whitney’s block-wall lots push homeowners to widen driveways for trailers and boats, and those bigger sliding and swing gates sag and fail first in the summer heat. The heavier the gate, the harder it leans on its hinge post, and that’s where the trouble starts.
We’re certified to service nine major brands, including LiftMaster, FAAC, Elite, and Mighty Mule. We don’t keep local parts stock, so we diagnose and order exactly what your gate needs, often within a day or two. Call (833) 780-1547 and we’ll tell you what we can do for your unit.
Call Us for Gate Repair in Whitney
If your gate is sagging, dragging, or dead in the water, don’t let it get worse through another summer. Call (833) 780-1547 for a free estimate, and a live person will pick up around the clock. We quote upfront, we stand behind the work with our 90-Day Done Right Promise in writing, and we’ll tell you the truth about whether to repair or replace. That’s the whole deal.
Written by the team at Gatewood Fence & Gate Enterprise.