Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Henderson
If your gate is dragging, dead, or fighting you every time you open it, we can help. We repair electric and automatic gates, hinge and post problems, realignment, locks, and welding across Henderson – Green Valley, Anthem, Seven Hills, and the older single-story streets off Water Street included. When you call (833) 780-1547, a live person answers, day or night, and we’ll tell you straight what the likely problem is before anyone comes out. We know how these gates are built here because we’ve spent a long time working on them.
Why Gatewood Fence & Gate Enterprise Is Henderson’s Preferred Gate Repair Company
Most of the work we do in Henderson comes from two things: gates that were put in manual and are now being automated, and posts that have shifted as the desert soil dries and settles. We’ve handled both long enough to know where to start. A gate sags in the hinge post, not in the middle – and that is where we begin, not with the panel or the operator.
We’re locally owned and owner-operated, with a published address and license number anyone can look up. Every job comes with our 90-Day Done Right Promise in writing, stated plainly – if it’s not done right, we make it right, and one call brings us back. Our technicians have up to 25 years of experience, and we’re certified to service nine major gate brands, including DoorKing, LiftMaster, and Mighty Mule.
Estimates are free and the price is agreed before any work starts. Standing offers include $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. You won’t get a different number at the door than the one you were quoted.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Henderson
Three of these come up more than any others in Henderson: getting an automatic operator working on a gate that was never built for one, correcting hinge posts that have shifted, and realigning gates that look fine until the swing arm drags. Here’s how each one plays out.
Automatic Gate Repair
Most automation calls in the newer Henderson master-planned tracts are retrofits – someone wants the manual side-yard gate to open from the car. Builder-grade operators on these gates are often undersized and run without a dedicated circuit, so the arm strains against a gate that was never balanced for automation. We check balance, hinge condition, and the power setup first, then repair or replace the operator so it isn’t fighting the gate.

Hinge & Post Repair
In Anthem and Seven Hills, the expansive desert soils dry, settle, and throw gate posts out of plumb long before the panel itself looks bad. That’s why the swing arm drags while the gate still appears straight. We re-plumb and re-hang the gate at the post, not just the panel – fix the panel without the post and you’ll fix it twice.

Gate Realignment
A gate that closes on its own is telling you where it’s failing. Realignment corrects the hinge bind, the post lean, and the latch alignment so the gate swings clean and the operator can do its job. In Henderson’s heat, we check the operator’s limit settings while we’re there, since UV and 100°F-plus summers throw them off.

Electric Gate Repair
Electric gates fail at the connections as often as the motor – corroded terminals, worn seals, and hardware that’s taken a beating from monsoon flash-rusting. We trace the fault, repair or replace the part, and confirm the safety edges work before we leave.
Trusted Brands We Service in Henderson
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers most of what’s installed on Henderson gates, from DoorKing access operators on community entries to LiftMaster and Ghost Controls swing units on residential driveways. We don’t claim to stock parts locally – what we do is diagnose accurately, source the right part, and come back to fit it. That’s usually faster than waiting on a swap-out.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Henderson Homes
- Builder-grade operators on gates that were installed manual. The arm is undersized and there’s no dedicated circuit, so the operator strains against a gate it was never matched to. It fails early, and it fails repeatedly until the gate is balanced and rehung properly.
- Hinge post shift from expansive desert soil. In Anthem and Seven Hills especially, drying soil moves the post and the gate follows. The swing arm drags and the latch misses long before the panel looks wrong.
- UV and 100°F-plus heat drying out operator seals. Powder-coat fades and seals crack, and the HOA-approved finish on a community-facing gate starts to look tired. The same visit usually turns into seal and finish work.
- Monsoon flash-rust on exposed steel hardware. The occasional downpour plus the rare winter freeze add rust and ground-settling that throws posts out of plumb again. Hinges and latch bolts take the worst of it.
Pricing for Gate Repair in Henderson, NV
Here’s what gate repair actually runs in Henderson, so you know before you call. A typical hinge and post repair runs $225 – $450 depending on how far the post has shifted. Gate realignment is usually $150 – $300. Automatic gate repair commonly falls between $285 – $650, and electric gate repair runs $250 – $600. A weld or rust repair is often $175 – $375. What moves the number is post condition, operator age, and whether power is already at the gate or needs a run.
The price is quoted and agreed before any work starts – not discovered on the invoice. Estimates are free, there’s no trip charge inside the county, and you’re welcome to a free second opinion on any written estimate you’ve already got. Call (833) 780-1547 for an exact quote.
We Also Serve Cities Near Henderson
If you’re just outside Henderson, we can help there too. We work throughout Boulder City, Whitney, Paradise, and Enterprise. For more on what we do, see our Gate Repair services, or read more about Gate Repair in Henderson. Call us and we’ll tell you what to expect for your area.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Henderson
You may need HOA approval if the gate faces a community street, and some automation work can require a permit – it depends on your community and the scope. In Henderson’s HOA-heavy master-planned tracts, the association enforces uniform gate colors, styles, and setback rules, so a repair that changes the look can draw a violation letter. We repair to match the HOA’s approved appearance so you’re not stuck explaining a mismatch. Call (833) 780-1547 and we’ll walk you through what your community typically requires.
Check the hinge post and whether there’s 120V power at the gate before anything else. Most Henderson automation jobs are retrofits of gates that were never engineered for an operator, and the builder usually skipped the power and conduit run. If there’s no power at the post, a solar gate opener retrofit using a Ghost Controls or LiftMaster unit is often the cleaner path. A qualified tech should correct any post sag and rehang the gate before mounting the operator, then verify the safety photocell and loop detector actually work. Call (833) 780-1547 for a free estimate.
Heat dries out operator seals and fades the powder-coat finish, and a strained builder-grade unit fails even faster. Sustained 100°F-plus summers and intense UV age seals, wiring, and finish faster here than in milder climates. If the operator is undersized for the gate, the heat just accelerates the failure. We repair the operator and fix the underlying strain so it lasts. Call (833) 780-1547 for an exact quote – estimates are free.
UL 325 is the safety standard for automatic gate operators, and yes, an automatic gate should have working entrapment protection such as photocells or edge sensors. Without it, a gate can close on a person, a pet, or a vehicle. This is genuinely dangerous equipment – a swing operator can crush or trap – so it’s best handled by a trained professional rather than a DIY fix. We verify the safety edges and sensors on every automatic gate job. Call (833) 780-1547 to have yours checked.
Almost always the post, not the gate. A gate sags in the hinge post, not in the middle, and in Henderson’s newer tracts the post shifts as the desert soil settles. Fix the panel without the post and you’ll fix it twice. We re-plumb the post and rehang the gate so the swing is true. Call (833) 780-1547 for a free estimate.
Ready to get your gate fixed right? Call Gatewood Fence & Gate Enterprise at (833) 780-1547 for a free estimate. A live person answers 24/7, estimates are upfront, and every job carries our 90-Day Done Right Promise in writing. If it’s not done right, we make it right – one call brings us back.
Written by the team at Gatewood Fence & Gate Enterprise.