Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Repair Services in Spring Valley, NV
If your gate won’t close all the way, drags on the track, or the opener hums and gives up, you’re in the right place. Gatewood Fence & Gate repairs driveway gates, sliding security gates, and ornamental iron across Spring Valley, and the person who answers your call is a live one, any hour of the day or night. We come out, tell you straight what’s wrong, and quote the price before anyone touches a wrench. Call (833) 780-1547 and we’ll set a window you can count on.
Why Spring Valley Homeowners Choose Gatewood Fence & Gate Enterprise
Spring Valley is a town where people notice who shows up and who doesn’t. That suits us fine, because accountability is the whole point. We’re locally owned and owner-operated, our license number is published and anyone can look it up, and every job leaves with a written 90-Day Done Right Promise on it. If something we fixed acts up inside that window, one call brings us back. No runaround, no phone tag, no “we’ll get to it in a few weeks.”
Upfront pricing is the other reason folks keep calling back. The number we quote is the number you pay, printed and agreed before a single bolt gets turned. Standing offers stay on the table without haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. If a gate motor has stopped behaving, you can also read up on Gate Motor & Opener in Spring Valley before you decide what to do. We hear a lot from homeowners off Rainbow Boulevard and down in the Rhodes Ranch pocket, and the story is usually the same: somebody down the road gave them a phone quote and then raised it at the door. That isn’t how we work.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Repair Services We Offer in Spring Valley
Gate Repair
A sagging gate usually fails at the hinge post, and that’s where the diagnosis starts. Fix the panel without the post and you’ll be fixing it again next season. We straighten, weld on-site, and replace the parts that truly need replacing.
Learn more about our Gate Repair in Spring Valley.

Gate Installation
New driveway and security gates get measured, ordered, and scheduled around your property’s layout and your HOA’s rules. You get a written price before anything is ordered, not a moving target after the truck pulls up.
Learn more about our Gate Installation in Spring Valley.

Gate Motor & Opener
We service and program the major opener brands, including LiftMaster and FAAC, from dead batteries to operators that stop mid-travel. Show us the gate closing on its own and we’ll show you where it’s failing.
Learn more about our Gate Motor & Opener in Spring Valley.

Gate Access Control
Keypads, remotes, and entry systems that have stopped reading get tested and reset, with new hardware quoted up front. If your community wants a system that plays nice with the HOA, we’ll walk the wiring with you.
Gate Parts & Welding
Rollers, hinges, latches, and operators get matched to what you already own, and on-site welding keeps the gate in your driveway instead of hauling it off. Nothing gets swapped that didn’t need swapping.
Neighborhoods We Serve in Spring Valley
Spring Valley covers a lot of ground, from the 89113 tracts along Warm Springs Road to the custom homes tucked behind block walls near Rainbow. Wherever you are, we aim to be out the same day or next, and we’ll tell you honestly which it’ll be.
- Rhodes Ranch
- The Lakes
- Peccole Ranch
- Spanish Trails
See the difference
Before
After
Before
After
Before
AfterWhy Spring Valley’s Climate & Housing Affect Gate Repair
The Mojave does a number on gates, and Spring Valley’s 89113 corridor feels it fully. Intense UV bakes the finish off ornamental iron, and blow-dust and sand work into pivot points, tracks, and roller assemblies, drying out the grease and grinding metal on metal. Summer monsoon gusts rattle swinging gates until hinges work loose, and the extreme heat thins out the lubricant in gate operators faster than most people expect. Pair that with Spring Valley’s housing mix, 1990s stucco tract homes behind block walls next to newer custom builds with heavy side-yard and sliding security gates, and the failure points land in predictable spots. That’s why we start at the hinge post and the track, not the middle of the panel.
Pricing for Gate Repair in Spring Valley
Prices are quoted and agreed before any work begins, and they don’t move at the door. Most Spring Valley gate repairs land in these ranges:
- Hinge, roller, or latch replacement: roughly $95 to $175 per gate
- On-site weld repair to a hinge post or frame: roughly $150 to $300
- Opener or motor diagnosis and reset: roughly $85 to $150
- Gate operator replacement: roughly $500 to $900 depending on brand and gate weight
- Full access-control keypad or remote reprogram: roughly $75 to $200
Exact figures depend on your gate, so call (833) 780-1547 and we’ll give you a free estimate. Remember the $40 off any repair over $200 and the 10% senior and veteran discount.
Service Area – Cities Near Spring Valley
Spring Valley keeps us busy, and we also work the surrounding communities. If you’re just outside the 89113 stretch, we cover neighbors in Summerlin, Enterprise, Paradise, and Winchester. Head back to our home page to see the full picture.
Serving Spring Valley, NV – Our Local Coverage Area
We serve Spring Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Spring Valley
Most Spring Valley gate repairs run between $95 and $300, with operator replacement or heavier welding climbing toward $900. The number is quoted and agreed before we start, so there are no surprises. Call (833) 780-1547 for an exact figure; estimates are free.
Often yes. Spring Valley calls get same-day or next-day attention, and we’ll tell you which it’ll be when you call. A gate left open isn’t something to sit on. Call (833) 780-1547 and we’ll set a time.
Yes, and we know the drill. Because Spring Valley is unincorporated Clark County, gate work routes through County code rather than a city building department, and HOA tracts in 89113 often need a repair that satisfies design rules and county setback and height limits at once. We’ll sort out what applies. Call (833) 780-1547 to talk it through.
In most cases, yes. We weld right in your driveway, which means the gate stays put and you keep your security. No loading it onto a trailer and waiting a week. Call (833) 780-1547 with the details.
We’re certified on nine major brands, including Mighty Mule, LiftMaster, and BFT. Whether it’s a residential operator or a heavier commercial unit, we can test and repair it. Call (833) 780-1547 for a free second opinion on any written estimate you’ve received.
Reach out today at (833) 780-1547 for a free estimate. A live person answers around the clock, upfront pricing is agreed before any work starts, and the 90-Day Done Right Promise rides on every job.
Written by the team at Gatewood Fence & Gate Enterprise.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Spring Valley Customers Say
"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo