Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Repair Services in Enterprise, NV
Enterprise is the kind of place where a gate doesn’t just belong to one house – it belongs to the whole street. Nearly every driveway gate, community entry gate, and side-yard gate in this master-planned suburb falls under recorded HOA rules that spell out the exact iron or vinyl design, color, and placement allowed. So fixing a gate here means fixing the hinge or the operator and matching the association’s approved style at the same time. We handle both. A live person answers our phone around the clock at (833) 780-1547, and estimates are free.
Why Enterprise Homeowners Choose Gatewood Fence & Gate Enterprise
Folks in Enterprise tend to call us after somebody else left a mess behind. Maybe a gate operator got swapped when only a control board was bad. Maybe a post got “fixed” with shims. We weld on site, in your driveway, and we repair first – swapping parts only when a part is actually the problem. Every job carries our 90-Day Done Right Promise in writing: if it isn’t done right, one call brings us back. No runaround.
We answer the phone with a live person 24 hours a day, because a gate stuck open at midnight on a gated community entry isn’t something you can leave until Monday. Standing offers are simple and you don’t have to haggle for them: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. The crew that shows up is background-checked, and our technicians have up to 25 years of experience. We work on the brands that dominate Enterprise tract homes and HOA entries – LiftMaster, FAAC, Mighty Mule – because those are the ones bolted to your wall.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Repair Services We Offer in Enterprise
Gate Repair
A sagging gate usually sags at the hinge post, not in the middle, and that’s where we start. We weld the frame in place, true up the post, and replace the worn hardware that started the problem. Learn more about our Gate Repair in Enterprise.

Gate Installation
New gates get measured and ordered to fit your opening and your association’s approved design, then scheduled for install – this isn’t a same-day call. You get the full measure and a written price up front before anyone lifts a wrench. Learn more about our Gate Installation in Enterprise.

Gate Motor & Opener
Summer heat here cooks operator control boards and solar charging panels, so we test the whole power and drive chain before pointing at the motor. If the operator’s fine and the sensor is dirty, we say so. Learn more about our Gate Motor & Opener in Enterprise.

Gate Access Control
Community call boxes and keypads get programmed and wired to spec, including matching the system your tract was built with. Learn more about our Gate Access Control in Enterprise.
Gate Parts & Welding
Rollers, hinges, photo-eyes, brackets, and gate frames get repaired on site with real welding, not zip-tied back together. Learn more about our Gate Parts & Welding in Enterprise.
Neighborhoods We Serve in Enterprise
Enterprise runs in clusters of tract homes laid out block by block, so we get to know a whole subdivision fast. We serve homeowners and community associations across the area, and typical response is same-day or next-day on repair calls within our service window. A few of the spots we work most:
- Southern Highlands and the surrounding tract clusters
- Mountain’s Edge
- Rhodes Ranch
- Guardian Angel and the Silverado Ranch edges
See the difference
Before
After
Before
After
Before
AfterWhy Enterprise’s Climate & Housing Affect Gate Repair
Enterprise sits in the Mojave, where summer highs push past 100°F and monsoon winds drag dust and sand across the valley. That combination is murder on sliding-gate rollers and photo-eye sensors – grit works its way into the track, the eye gets clouded, and the gate stops closing on its own. The heat bakes operators, solar panels, and control boards until they fail a season early. Flash-flood rain also moves gate posts set in caliche-heavy desert soil, which is why a post that was plumb last spring can be off by an inch after a good monsoon. And because so many Enterprise gates are HOA-controlled, we’re often matching an association’s exact approved iron or vinyl color and design as we repair – not just making the gate work again. Powder-coated and vinyl gates here also fade and crack within a few seasons under the sun, which drives a steady stream of recurring calls.
Pricing for Gate Repair in Enterprise
We quote and you agree on the price before any work starts – the number on the estimate is the number on the invoice. Here’s roughly what gate work lands at in Enterprise:
- Hinge or roller repair: $120-$280
- Photo-eye or sensor replacement: $140-$300
- On-site welding / frame repair: $200-$450
- Control board or operator repair: $220-$500
- Post reset or realignment: $250-$600
New gates, operators, and access control systems are quoted after a free measure, since the price depends on the size of the opening and the approved design. Our technicians have up to 25 years of experience, and standing offers apply: $40 off any repair over $200, free second opinion on any written estimate, and no trip charge inside the county.
Service Area – Cities Near Enterprise
We work across Enterprise and into the neighboring communities folks here travel through every day. If you’re nearby in home service coverage, we also take gate calls around Spring Valley, Paradise, Winchester, and Henderson. Same promise, same upfront pricing, same person answering the phone – just tell us where the gate is.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Enterprise
Gate repair in Enterprise typically runs $120-$300 for hinge, roller, or sensor work, and $200-$500 for welding or operator repair. The price depends on the gate type and what’s actually failing. We quote it and you agree before work starts. Call (833) 780-1547 for an exact quote – estimates are free.
Usually, yes – repair and emergency calls are often handled same-day or next-day within our service window. A stuck-open community gate or a driveway gate jammed shut gets priority. New gate installs and operators get scheduled after a measure. Call (833) 780-1547 and we’ll tell you the soonest window.
Yes. Most Enterprise gates fall under recorded CC&Rs that dictate the design, color, and placement, so we repair to match the association’s approved iron or vinyl spec, not just to make the gate function. If you’ve got the association’s written spec, have it handy.
Yes – operator and access control work includes the power run, safety edges, and programming, all measured and quoted up front. That kind of work gets scheduled, not rushed same-day. Call (833) 780-1547 to set up a free measure and a written price.
We service the major gate brands common in Enterprise tract homes and HOA entries, including LiftMaster, FAAC, BFT, and Mighty Mule. If yours isn’t one of those, tell us the model and we’ll let you know. Call (833) 780-1547 for a free estimate.
If your gate in Enterprise is dragging, stuck, or acting up, call us at (833) 780-1547. A live person picks up, the estimate is free, and the price is agreed before we start. The name is on the shop, and the shop is down the road – that’s the oldest kind of accountability there is.
Written by the team at Gatewood Fence & Gate Enterprise.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Enterprise Customers Say
"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo