A Gatewood company - serving Enterprise, NV

Lock Repair in Enterprise, NV

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Lock Repair in Enterprise, NV

Gate lock repair in Enterprise, NV usually runs $95 to $220 depending on the lock type and what’s actually broken, and most jobs are finished in a single visit. If your gate lock is sticking, spinning, or won’t catch the way it used to, we repair it in place rather than talk you into a whole new lock set. We’re Gatewood Fence & Gate, locally owned and owner-operated, and gate locks are one of those small parts that decide whether the rest of your gate works.

An entry gate is only as good as the lock holding it. When a key won’t turn or the latch won’t throw, the whole thing might as well be a fence post. You can call us at (833) 780-1547 and a live person answers, day or night, not a voicemail box. We handle gate locks as part of our broader Gate Repair work, and we treat a stubborn lock the same way we treat a sagging gate: find the real cause before touching a tool.

We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule hardware. That matters here because the lock on an automatic gate is tied to the operator, and a stuck lock often traces back to the opener, not the lock itself. Our technicians have up to 25 years of experience, and every lock job carries the 90-Day Done Right Promise in writing. If it fails again inside that window, one call brings us back.

Key Takeaways

  • Most residential gate lock repairs in Enterprise fall between $95 and $220.
  • We repair locks in place instead of swapping parts that don’t need swapping.
  • Sticking locks on automatic gates are often an operator alignment issue, not a lock issue.
  • A live person answers every call, 24 hours a day.

When You Need Lock Repair

Gate locks don’t fail all at once. They give you warning signs for weeks, and most people ignore them until the lock finally quits. Here’s what we hear most often from homeowners around Enterprise.

  • The key turns but the bolt won’t throw. This is usually a worn cam or a latch that’s dropped out of alignment with the strike. Common on older manual swing gates where the post has shifted a quarter inch over the years.
  • The lock is stiff or gritty. Desert dust works its way into the cylinder and the latch mechanism. In Enterprise we see this a lot on gates facing open lots, where windblown grit packs into the keyway and the internals.
  • The gate won’t latch closed on its own. If you have to lift or shove the gate to get it to catch, the lock isn’t the whole story. The hinge or post has moved, and the latch is telling you so.
  • The electronic lock or keypad stopped responding. On LiftMaster or FAAC setups, a dead keypad or a lock that won’t release is often a wiring or power problem, not a failed lock body.
  • Someone forced the lock. A pryed latch, a bent bolt, or a cylinder that spins freely usually means someone tried the gate. We repair and, where it makes sense, reinforce the strike so it’s harder to hit twice.
  • The lock rattles or feels loose. Loose mounting screws and worn strike plates let the whole assembly shift, which wears the lock faster and makes the gate feel sloppy.

If a couple of these sound familiar, it’s worth a look before the lock quits entirely. Gates that get used every day wear the lock and the latch long before the frame gives out.

Our Lock Repair Process

We don’t guess. Here’s how a lock repair actually goes when we show up.

  1. We look at the whole gate, not just the lock. A gate sags in the hinge post, not in the middle, and that is where we start. If the gate is out of square, a new lock will bind the same way the old one did.
  2. We test the lock under load. We open and close the gate the way you do, watch where it catches, and check the latch against the strike. Show us the gate closing on its own and we’ll show you where it’s failing.
  3. We free up or repair the mechanism. Most stiff locks need cleaning, lubrication, and a small adjustment, not replacement. If a cam, spring, or bolt is worn, we swap just that part. We don’t replace a whole lock set to fix one worn piece.
  4. We realign the strike and latch. Fix the panel without the post and you’ll fix it twice. If the post or hinge has shifted, we correct the alignment so the lock catches cleanly every time.
  5. We check the operator if it’s an automatic gate. On LiftMaster and FAAC systems, we confirm the opener is stopping the gate in the right spot. A lock that won’t release is often the operator pushing the gate past where it should stop.
  6. We test it with you and hand you the promise in writing. You work the gate, we watch, and you get the 90-Day Done Right Promise stamped on the job. If it acts up, you call and we come back.

Lock Repair Pricing in Enterprise

Pricing here is honest and upfront. You get a number before we start, and it doesn’t change at the door. Most residential lock repairs land in these ranges.

Job Typical range
Clean, lubricate, and adjust a stiff lock $95 – $140
Replace a worn cylinder or latch bolt $120 – $180
Realign strike and latch after post or hinge shift $140 – $220
Repair or replace an electronic lock or keypad $160 – $280
Reinforce a forced or damaged lock $150 – $250

What moves the number? The type of lock matters most. A simple manual latch is quick; a keypad tied into a DoorKing or BFT access system takes more time to diagnose and test. Whether the gate frame or post has shifted also affects the job, since realignment is more work than a straight lock swap. And if the lock was forced or damaged, there’s usually a bit of reinforcement involved so it doesn’t happen again.

A few standing offers apply here, no haggling needed. You get $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate you’ve already got from someone else. Seniors and veterans get a permanent 10% discount. If another company quoted you a full lock replacement, bring us the estimate and we’ll tell you honestly whether repair makes more sense. Estimates are free.

If you’re weighing a repair against a bigger gate job, our home page lays out everything we handle, and our Gate Repair in Enterprise page covers the full range of fixes we do on site.

FAQs – Lock Repair

How much does gate lock repair cost in Enterprise, NV?

Most gate lock repairs in Enterprise cost between $95 and $220, and electronic locks or keypads run a bit higher, up to around $280. The final number depends on the lock type and whether the gate frame needs realigning. Call (833) 780-1547 for an exact quote, and estimates are free.

Can you repair my gate lock the same day?

Same-day service is common for standard lock repairs, and a live person answers your call around the clock so you’re not waiting on a callback. If a part needs ordering, we’ll tell you upfront and schedule the return visit. Call (833) 780-1547 and we’ll find a window that works.

Is it cheaper to repair my gate lock or replace it?

Repair is usually cheaper, and it’s almost always what we recommend first. A worn cylinder, a loose strike, or a latch that’s out of alignment can be fixed for a fraction of the cost of a new lock set. Replacement only makes sense when the lock body itself is cracked or the internals are shot. Call (833) 780-1547 and we’ll give you a straight answer.

Why does my keypad or electronic gate lock keep failing?

A failing keypad or electronic lock is usually a wiring, power, or operator issue rather than a dead lock. On LiftMaster and FAAC systems we’ve seen the opener stop the gate in the wrong spot, which stresses the lock every cycle. We diagnose the whole system, not just the part that quit. Call (833) 780-1547 to get it looked at.

Do you service locks on automatic gates and access control systems?

Yes, we service locks tied into automatic gates and access control, including keypads, card readers, and intercom-triggered latches. We’re certified on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Call (833) 780-1547 and describe what the gate is doing.

Call for a Free Estimate

Don’t let a sticky lock turn into a gate you can’t secure. We repair locks in place, we fix the cause instead of the symptom, and we back the work with the 90-Day Done Right Promise in writing. A live person answers every call, day or night. Call (833) 780-1547 for a free estimate on your gate lock repair in Enterprise, and we’ll get you a straight price before any work starts.

Written by the team at Gatewood Fence & Gate Enterprise, serving Enterprise.

Need Gate Repair help in Enterprise? Licensed & insured · 30-60 min response · free estimates
Call (833) 780-1547
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Gatewood Fence & Gate Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch