Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterAutomatic Gate Repair in Enterprise, NV
Automatic gate repair in Enterprise means getting a gate that opens and closes on its own back to doing exactly that: reliably, safely, and without you standing in the driveway waving at a remote. Most of that work is diagnosing the motor, the opener, and the safety sensors, then fixing what’s actually broken instead of selling you a new gate. We handle automatic gate repair across Enterprise, and we do it repair-first. If the arm, the control board or the post can be saved, we save it. Call (833) 780-1547 for a free estimate, and a live person picks up.
Automatic gates fail for honest reasons. Sun bakes the control box on a west-facing wall, dust and grit from a gravel drive work into the slide track, and cheap hinge hardware wears out years before the gate frame does. When something quits, the whole driveway stops working, and that’s when a homeowner needs a straight answer instead of a sales pitch. That’s what our work under Gate Repair in Enterprise is built around.
Key Takeaways
- We diagnose and repair automatic gate motors, openers, and access control for LiftMaster, Mighty Mule, FAAC, and BFT systems.
- Most automatic gate problems trace back to the hinge post, safety sensors, or a control board, not a whole new gate.
- Every automatic gate repair job carries the 90-Day Done Right Promise in writing.
- Standing offers: $40 off any repair over $200, no trip charge inside the county, free second opinion on any written estimate, and 10% off for seniors and veterans.
- Free estimates and a live person on the phone 24/7 at (833) 780-1547.
When You Need Automatic Gate Repair
Here’s what homeowners call us about. If any of these sound familiar, it’s worth a look before the gate quits entirely and leaves you parking on the street.
- The gate opens partway and stops. Usually a bound hinge, a worn drive gear, or a control board that’s throwing a fault. In Enterprise, we see this a lot on gates with dusty tracks where grit packs into the gear rack.
- The gate opens on its own, or won’t close when it should. That’s frequently a misaligned or dirty safety sensor, or a limit switch that’s drifted. Show us a gate closing on its own and we’ll show you where it’s failing.
- The remote works, then it doesn’t. Weak battery, a receiver that’s lost its pairing, or interference from a new appliance or smart meter nearby. Not always the opener.
- You hear the motor run but the gate doesn’t move. The operator is turning but the gate isn’t. That’s a drive, chain, or gear failure we can usually fix on site.
- The gate sags and drags the ground. A gate sags in the hinge post, not in the middle, and that’s where we start. Fix the panel without the post and you’ll fix it twice.
- The gate arm is bent or the mount is loose. Common after a bump from a vehicle or a hard wind. We can often weld and re-mount the arm rather than replace the operator.
If your gate isn’t automatic yet or you’re weighing repair against replacement, the broader Gate Repair page walks through what we do across every gate type we service.
Our Automatic Gate Repair Process
We don’t guess at the problem and start swapping parts. Here’s how a repair actually runs, from the call to the gate working again.
- We take the call and ask the right questions. What kind of gate, what brand (LiftMaster, FAAC, Mighty Mule, BFT, and others), and what it’s doing. That helps us show up with the right parts and a realistic window.
- We diagnose on site. We check the operator, the safety sensors, the control board, the power, and the gate itself: the hinges, the post, the track. A lot of “opener problems” are really gate problems.
- We give you an upfront number before we touch anything. No surprises at the door. If it’s a repair we can make, we quote it plainly. If a second opinion makes sense, that’s free.
- We repair, and weld on site when needed. Loose mounts, bent arms, cracked posts: we bring the welding to your driveway so the gate stays put, not hauled off for a week.
- We test every safety function. The gate has to stop and reverse on obstruction, and the sensors have to trip correctly. A gate that closes on a kid or a car isn’t fixed, no matter how well it runs.
- We back it in writing. Every automatic gate repair job carries the 90-Day Done Right Promise. If it’s not done right, one call brings us back.
We service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our technicians have up to 25 years of experience, and we answer the phone with a live person 24 hours a day, not a voicemail box.
Automatic Gate Repair Pricing in Enterprise
Automatic gate repair in Enterprise generally runs from about $150 for a sensor adjustment or remote re-pairing up to $650 or more for an operator or control board replacement. Most everyday repairs land somewhere in the middle. Here’s roughly what the common jobs cost, so you can plan before you call.
| Repair | Typical range |
|---|---|
| Safety sensor or limit switch adjustment | $150 – $250 |
| Remote / receiver re-pairing or replacement | $130 – $220 |
| Hinge, roller, or track repair | $180 – $380 |
| Gate arm / operator mount weld and re-fit | $250 – $450 |
| Control board or drive gear replacement | $300 – $600 |
| Full operator (motor/opener) replacement | $450 – $900+ |
What moves the number: the brand and age of the operator, whether parts are still available, whether the gate frame or post needs welding, and how accessible the control box is. A sliding gate on a long gravel drive in the outer parts of Enterprise takes more diagnostic time than a swing gate right off the street. We don’t quote one price on the phone and charge another at the door. You get the number upfront, and it’s the number.
Standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Every estimate is free. Call (833) 780-1547 to get yours.
Is it cheaper to repair or replace an automatic gate?
Repair is usually cheaper, and we’ll tell you honestly when it isn’t. Most automatic gate problems are one failing part (a sensor, a control board, a worn hinge), and fixing that part costs a fraction of a new gate. Replacement makes sense when the operator is past its service life and parts are gone, or when the gate frame itself is rusted through or structurally shot. Our rule is simple: if we can fix it and make it last, we fix it. That’s why we weld on site instead of hauling gates away. A free second opinion on any written estimate will tell you which way to go.
FAQs – Automatic Gate Repair
How much does automatic gate repair cost in Enterprise?
Most automatic gate repairs in Enterprise fall between $150 and $450, with operator or control board replacement running $300 to $900+ depending on the brand. The exact number depends on your operator, the gate, and the parts involved. Estimates are free and upfront, so call (833) 780-1547 for an exact quote on your gate.
Can you come out today for automatic gate repair?
Often yes. We answer the phone with a live person 24 hours a day, and we work hard to hit the window we promise. When you call, we’ll tell you honestly what we can do today. Call (833) 780-1547 and we’ll find a time that works.
My gate runs but won’t close. Is that a motor problem?
Not usually. A gate that runs but won’t close is most often a safety sensor that’s dirty, misaligned, or tripped, or a limit switch that’s drifted. The motor is fine; the gate just thinks something’s in the way. That’s a quick diagnostic and usually an inexpensive fix, so it’s worth a call before you assume the worst. Reach us at (833) 780-1547.
Do you work on the brand of gate I have?
We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If yours isn’t on that list, call anyway. We’ll tell you straight whether we can help. Call (833) 780-1547 and tell us what it says on the operator box.
Get Your Gate Working Again
A gate that won’t open on its own is more than an annoyance. It’s the first thing between your property and the street, and it’s supposed to work every time. Gatewood Fence & Gate Enterprise is locally owned and owner-operated, our name is on the shop and on every invoice, and every automatic gate repair job carries the 90-Day Done Right Promise in writing. Call (833) 780-1547 for a free estimate. A live person answers, day or night, and we’ll give you a straight answer on what your gate needs.
For everything else we do across the area, start at the home page, or reach out and we’ll point you the right way.
Written by the team at Gatewood Fence & Gate Enterprise, serving Enterprise.