A Gatewood company - serving Enterprise, NV

Electric Gate Repair in Enterprise, NV

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Electric Gate Repair in Enterprise, NV

Electric gate repair in Enterprise usually means one of three things: the gate stopped moving, it moves but won’t stop, or it opens on its own at 2 a.m. Most of those calls trace back to a tired motor, a misaligned sensor, or a post that has shifted in our desert soil. Call (833) 780-1547 and a live person answers, day or night, and we’ll tell you straight whether it sounds like a same-day fix or something bigger.

Gatewood Fence & Gate Enterprise is owner-operated, and Hal has been at this since 2001. That matters when your driveway gate is the thing standing between the street and everything you own. We repair what other outfits want to replace, we weld on site so the gate never leaves your property, and every electric gate repair job carries the 90-Day Done Right Promise in writing. If it isn’t right, one call brings us back.

If you’re dealing with a gate that’s stuck, dragging, or humming without moving, start with our home page for the full picture of what we handle, or go straight to Gate Repair in Enterprise for the broader list of what we fix. Electric gates share a lot of DNA with manual ones: hinges, posts, and alignment. The motor just adds a few more ways to fail.

When You Need Electric Gate Repair

Electric gates rarely die all at once. They give you warning signs for weeks, and most folks chalk it up to the wind or a bad remote. Here’s what we hear most in Enterprise:

  • The gate moves in jerks or stalls partway. Often a worn drive gear or a motor working against a hinge that’s out of adjustment. A LiftMaster or FAAC arm that stutters is telling you something before it quits entirely.
  • It opens fine but won’t close, or reverses for no reason. Nine times out of ten this is a safety sensor or a photo-eye that’s dirty, knocked out of line, or seeing the afternoon sun. In the wide-open lots around Enterprise, sun glare on a sensor is a real problem.
  • The gate swings open on its own. That’s usually a limit switch that’s drifted or a control board acting up. If your gate opens in the middle of the night, don’t wait on it.
  • Remote or keypad stopped working, but the gate still moves. Could be the remote, the receiver, or a battery. We test all three rather than selling you a new opener you don’t need.
  • The gate sags and scrapes the ground as it swings. That’s a hinge-post problem, not a motor problem. A gate sags in the hinge post, not in the middle, and that’s where we start. Fix the panel without the post and you’ll fix it twice.
  • Motor runs but the gate doesn’t budge. A sheared arm pin, a stripped gear, or a chain that’s jumped. All repairable. None of it means you need a whole new system.

One safety note before you go poking at anything: electric gates carry real stored force, and a gate motor can start moving when you least expect it. Disconnect power at the breaker before you even think about reaching into the operator arm, and leave the actual repair to someone trained for it. A gate that closes on a hand or a car isn’t worth the risk of a DIY fix.

Our Electric Gate Repair Process

Here’s how a typical electric gate repair call goes from the moment you pick up the phone to the moment you pull out of the driveway and the gate closes behind you:

  1. You call and talk to a person. Not a voicemail, not a call center. You describe the symptoms, we ask a few questions, and we give you an upfront range before anyone rolls. No haggling, no surprise at the door.
  2. We come out and diagnose on site. We test the motor, the control board, the sensors, the hinges, and the posts. The person who shows up puts hands on the actual gate, not a clipboard.
  3. You get a written estimate before work starts. Line by line: what’s broken, what we’re fixing, what it costs. If you’ve got another estimate in hand, we’ll give you a free second opinion on it.
  4. We repair and weld on site. Hal fixes the gate in your driveway. Broken hinge tabs, sagging posts, cracked brackets, worn arms: most of it gets welded or adjusted right there. The gate stays put.
  5. We test it every way we can. We cycle it open and shut, test the sensors, test the safety reverse, and run it with the remotes and keypad. Show me the gate closing on its own and I’ll show you where it’s failing.
  6. We hand you the 90-Day Done Right Promise in writing. Not buried in fine print. If something we touched acts up inside 90 days, one call and we’re back out.

We service nine major gate brands, including Mighty Mule, LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. If your opener is one of those, we’ve likely got the parts and the know-how to fix it rather than swap the whole unit.

Electric Gate Repair Pricing in Enterprise

Nobody likes a price that changes when the truck pulls up. We give you upfront pricing and stand behind it. Here’s a realistic ballpark for electric gate repair in Enterprise:

  • Diagnostic / service call: no trip charge inside the county. We don’t charge you to come look.
  • Sensor and photo-eye realignment or replacement: a modest repair, often the first thing to check when a gate won’t close.
  • Hinge, bracket, or post repair with on-site welding: mid-range, and it’s what saves you from replacing a gate that’s structurally fine.
  • Motor or operator arm repair: varies by brand and part. A LiftMaster arm and a Mighty Mule arm aren’t the same job.
  • Control board replacement or reprogramming: the higher end, since boards and remotes need pairing and testing.

What moves the number: the brand, whether parts are in stock, and whether the problem is mechanical or electronic (or both). What doesn’t move it is the time of day: that’s what a live person around the clock is for.

Standing offers, no haggling required: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (833) 780-1547 for an exact quote and a free estimate. If you’re weighing repair against a full replacement, read our notes on Gate Repair in Enterprise before you decide, because a lot of “replace it” advice is really “we’d rather sell you a gate.”

Is it cheaper to repair an electric gate or replace it?

Repair is almost always cheaper than replacement, and it’s usually the right call unless the frame itself is rusted through or the post is failing. A new motor or operator arm, a welded hinge, or a new control board runs a fraction of a full electric gate replacement, and it keeps your existing gate and its hardware. We’ll tell you honestly when replacement is the smarter money, but we don’t lead with it. Call (833) 780-1547 and we’ll give you a free estimate either way.

Can you come out the same day?

In most cases, yes. A live person answers around the clock, so you’re not waiting on a callback to find out. Tell us what the gate’s doing when you call and we’ll give you a realistic window.

Do you work on my brand of gate opener?

We’re certified to service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your opener is one of those, we’ve likely seen the exact failure your gate has right now.

What does the 90-Day Done Right Promise actually cover?

It covers the repair we did. If the same problem comes back within 90 days, one call brings us back out to make it right, in writing, no runaround. It’s printed on every job, not tucked into a paragraph of legalese.

My gate opens by itself at night. Is that urgent?

Treat it as urgent. A gate that opens on its own is a security problem, not a quirk. It’s usually a limit switch or control board, and it’s worth having looked at sooner rather than later. Call (833) 780-1547 and we’ll get eyes on it.

FAQs – Electric Gate Repair

How much does electric gate repair cost in Enterprise, NV?

Most electric gate repairs in Enterprise fall into a range that depends on the brand and the part, from a sensor realignment up to a control board replacement; there’s no trip charge inside the county, and the estimate is free and upfront before any work starts. Call (833) 780-1547 for your exact number.

Why won’t my electric gate close all the way?

A gate that won’t close is usually a safety sensor issue, a photo-eye knocked out of line, or a limit switch that’s drifted, and it’s often a quick fix once we’re on site. Don’t force it shut; shut off power at the breaker and let us look. Call (833) 780-1547.

Can you fix my gate instead of replacing the motor?

Yes, and that’s our default. We repair what other companies want to replace, and we weld and adjust on site rather than hauling the gate off. A lot of “you need a new opener” calls turn out to be a hinge, a sensor, or a post. Call for a free second opinion on any written estimate.

Do you answer the phone at night or on weekends?

Yes. A live person answers 24 hours a day, 7 days a week. No voicemail, no queue, no chatbot. Call (833) 780-1547 and you’ll talk to someone who can help.

How long does an electric gate repair take?

Most repairs finish in a single visit, often the same day you call. Sensor and hinge fixes are quicker; a motor or control board swap can take a bit longer if a part has to come in. We’ll tell you the honest window when you call.

Ready to Get That Gate Fixed?

If your electric gate is stalling, swinging open on its own, or refusing to close, don’t wait for it to lock you out or let the wrong car in. The name is on the shop, and the shop is down the road. Hal and the crew have been fixing gates since 2001, they weld on site, and every job comes with the 90-Day Done Right Promise in writing. Call (833) 780-1547 for a free estimate, and a live person will pick up.

Written by the team at Gatewood Fence & Gate Enterprise, serving Enterprise.

Need Gate Repair help in Enterprise? Licensed & insured · 30-60 min response · free estimates
Call (833) 780-1547
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Gatewood Fence & Gate Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch