Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Sunrise Manor
If your gate is dragging, your latch won’t line up, or your old operator quit and nobody stocks the board anymore, we do that work in Sunrise Manor. We know this township block by block – the tract subdivisions off Lamb Boulevard, the older rancho-style homes near the 89110 ZIP, the side-yard gates that have been swinging on the same hinges since the Reagan years. Most of the gate calls here aren’t new installs. They’re tired gates that need a real fix, not a sales pitch. Call (833) 780-1547 and a live person picks up, day or night. Estimates are free, and the price you hear is the price you pay.
Why Gatewood Fence & Gate Enterprise Is Sunrise Manor’s Preferred Gate Parts & Welding Company
We’re locally owned and owner-operated, and the name is on the shop and on every invoice. In Sunrise Manor that matters, because this is a place where people have already been burned by an outfit that quoted one number on the phone and another at the door. We don’t do that. The price is quoted and agreed before any work starts.
Our technicians have up to 25 years of experience, and they’re background-checked and in uniform on every job. We’re certified to service nine major gate brands, so when your DoorKing board or a LiftMaster operator acts up, we can actually diagnose it instead of guessing. Every job carries our 90-Day Done Right Promise in writing – if it’s not done right, one call brings us back.
Response time to Sunrise Manor is quick because we’re right down the road, not routing you through a queue three states away. And the standing offers don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Sunrise Manor
Most of what we see in Sunrise Manor comes down to an aging gate fighting a settling post. Here’s how we handle the four jobs that come up most.
Hinge Replacement in Sunrise Manor
A gate sags at the hinge post, not in the middle, and that’s where we start. In Sunrise Manor’s older tracts, the hinges themselves are often seized from years of desert heat and dust, but swapping them alone won’t fix a gate whose post has already shifted. We replace the hinges and check the footing, so you’re not back on the phone in a month. That’s the difference between a real fix and a patch.

Post Replacement in Sunrise Manor
This is the big one here. Original 1980s gate posts across Sunrise Manor were frequently set in shallow concrete that has since cracked and settled in the desert soil, so a simple hinge or latch repair often turns into resetting the footing. Fix the panel without the post and you’ll fix it twice. We reset and replace posts properly so the gate has something solid to hang on again.

Rail Repair in Sunrise Manor
Wood panels warp and split in the Mojave sun, and monsoon dust storms grind grit into every joint. That’s why so many Sunrise Manor gates need rail repair over and over – each repair fights the same warped panel. We fix the rails and tell you honestly when a warped panel is past saving, so you’re not paying for the same repair a third time.

Custom Welding in Sunrise Manor
Half the steel gates in Sunrise Manor just need somebody who can weld. A cracked frame, a broken weld at the corner, a bent picket – we bring the welding to your driveway and fix the gate where it hangs instead of hauling it off or swapping parts that don’t need swapping. The gate stays put, and you get it back the way it should close.
Trusted Brands We Service in Sunrise Manor
We service all nine major gate brands, and the ones we see most in Sunrise Manor are DoorKing, LiftMaster, and Mighty Mule, with the occasional older FAAC operator still limping along on a board nobody makes anymore. We don’t claim to stock parts on a truck – nobody legitimately does for every brand – but we know these systems and we turn repairs around fast. When a control board is truly obsolete, we’ll tell you straight rather than sell you a workaround that fails in a season.
Common Gate Parts & Welding Problems We See in Sunrise Manor Homes
- Hinge posts settled in cracked, shallow concrete. Original 1980s footings across Sunrise Manor weren’t poured deep for desert soil, so the post leans and the gate sags no matter how many hinges you throw at it. The footing is usually the real culprit.
- Obsolete 1980s operators with no safety photocell. Plenty of Sunrise Manor gates still run on a control board that has no replacement parts and no modern safety beam. That’s a genuine hazard, not just an inconvenience.
- Sun-warped and split wood panels. Extreme summer heat and monsoon grit dry out and crack wooden gates, so rail repairs never quite line up until the panel itself is addressed.
- Heat-seized and dust-choked metal hinges. Years of Mojave heat and blowing dust lock up steel hinges, so the gate binds even when the panel is fine.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Parts & Welding in Sunrise Manor, NV
Here’s what this work actually runs in the Sunrise Manor market. A typical hinge replacement runs $120 – $260. Post resetting or replacement – the job this township needs more than most – runs $250 – $600 depending on footing and material. Rail repair on a wooden gate runs $150 – $400, and custom welding on a steel gate runs $180 – $500 if the frame is sound. An operator retrofit with modern safety photocells typically runs $350 – $750.
What pushes a job toward the higher end is a cracked footing, a gate that needs both post and panel work, or an operator that’s genuinely obsolete. The quote is agreed before any work starts – you’ll never get an invoice bigger than the number you said yes to. Estimates are free, and we’ll give you a free second opinion on any written estimate you’ve already got. Call (833) 780-1547 for an exact quote.
We Also Serve Cities Near Sunrise Manor
We work all around this corner of the valley, not just inside Sunrise Manor’s lines. If you’re in Whitney, Winchester, Las Vegas, or North Las Vegas, the same crew and the same 90-Day Done Right Promise apply. Learn more about Gate Parts & Welding on our service page, or see everything we do in Sunrise Manor.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Sunrise Manor
Because the post moved, not the hinge. In Sunrise Manor’s rancho-style tracts, those original gate posts were set in shallow concrete that has cracked and settled in the desert soil, so the footing is the real problem. A pro usually inspects the post footing first and resets it – new hinges on a leaning post will just bind again. Call (833) 780-1547 for a free look at the footing.
Sometimes, but not always worth it. If the control board is still serviceable, we can often add modern safety photocells to an older LiftMaster or FAAC operator so it meets current safety expectations. But once the board is obsolete with no replacement parts, retrofitting becomes a false economy – replacing the operator is usually the cheaper path. Call (833) 780-1547 and we’ll give you a straight answer on which side you’re on.
Usually weld repair, if the frame is sound. A cracked weld, a bent frame corner, or a broken picket on a steel gate in Sunrise Manor typically runs $180 – $500 to fix on site – far less than a new gate. Replacement only wins when the whole frame is rusted through or the gate is paired with an obsolete operator. Call (833) 780-1547 for a free estimate before you decide.
Because the desert beats them up year after year. Intense summer sun warps and cracks wooden panels, and monsoon dust storms grind grit into the joints, so rails keep pulling loose and never quite align. Fixing the rails without addressing a warped panel just means the same repair next season. Call (833) 780-1547 and we’ll tell you honestly whether to repair the rails or the panel.
Yes, in most cases. A jammed rack and pinion is often a worn gear rack, a misaligned rail, or debris caught in the track – all fixable without a full operator swap. In Sunrise Manor’s dusty conditions, rack jams from grit are common, and a proper cleaning and realignment usually settles it. Call (833) 780-1547 for a free diagnosis before anyone talks you into a new operator.
Get Your Sunrise Manor Gate Fixed Right
If you’re staring at a dragging gate, a jammed operator, or a post that’s clearly given up, don’t live with it another season. Call Gatewood Fence & Gate Enterprise at (833) 780-1547 for a free estimate – a live person answers around the clock, the price is agreed before any work starts, and every job backs the 90-Day Done Right Promise in writing. Seniors and veterans get a permanent 10% discount, and there’s no trip charge inside the county. We’ll get your Sunrise Manor gate closing right.
Written by the team at Gatewood Fence & Gate Enterprise.