Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Access Control Across Sunrise Manor
If the keypad on your driveway gate has gone dead or the remote only works when you’re standing right next to it, you’re in the right place. We handle keypad entry, remote control, phone entry, card readers, and video intercoms for the older gates that fill Sunrise Manor – the 1970s through 1990s tract homes off Charleston and Lamb, the rancho-style places near the Desert Pines area, and the side-yard gates that came with the house. We know these gates and the legacy operators bolted to them. A live person answers when you call (833) 780-1547, day or night, and you’ll get a straight answer about what’s actually wrong before anyone touches a screwdriver.
Why Gatewood Fence & Gate Enterprise Is Sunrise Manor’s Preferred Gate Access Control Company
Sunrise Manor is an unincorporated township, which means the accountability that comes with a city hall just isn’t there – folks here have learned to judge a company by whether the person who shows up actually knows the neighborhood. We do. When you tell us your gate is near the intersection of Charleston and Nellis or back in one of the tracts off Sahara, we know what you’re likely dealing with before we roll up.
We’re locally owned and owner-operated, with a published address and license number anyone can look up. That matters to Sunrise Manor homeowners who’ve been quoted one price on the phone by a national outfit and charged another at the door. Every job carries the 90-Day Done Right Promise in writing – one call brings us back, no runaround. Our technicians have up to 25 years of experience with the nine major gate brands we service, and standing offers like $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate are on the table from the start. No haggling required.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Access Control Services in Sunrise Manor
Access control on an old gate is rarely just one part. Here’s what we actually do out there in the neighborhoods.
Keypad Entry
Keypads mounted on sun-exposed posts are the first thing to fail in Sunrise Manor. Years of UV and monsoon dust crack the housings and kill the buttons. We replace keypads and, just as often, trace the problem back to the low-voltage wiring that’s baked brittle under the desert sun – because putting a new keypad on bad wire just means you’ll be calling again next spring.

Remote Control
A remote that works only up close usually means a receiver fighting heat and dust interference, or an older LiftMaster or Linear board losing its signal logic. We test the receiver, the antenna, and the board together rather than guessing. It’s often a fixable part, not a whole new operator.

Phone Entry
Phone entry lets you buzz someone in from the house or from work without walking out to the gate. On an aging operator this needs a compatible interface, and we’re honest about when an old board can’t be made to talk to it. That’s the retrofit-or-replace question, and we’ll show you both numbers.

Card Reader
Card readers on Sunrise Manor properties take a beating from sun and grit, and the readers themselves often outlast the posts they’re screwed to. We mount and service them, and we check the post footing while we’re there – a reader that works is no help if the gate it’s attached to has shifted.
Trusted Brands We Service in Sunrise Manor
We’re certified to service nine major gate brands, and the ones we see most on Sunrise Manor gates are LiftMaster, Linear, and Mighty Mule, with the occasional FAAC. We don’t stock parts, so we diagnose first and order what your gate actually needs rather than swapping whatever’s on hand. That keeps the fix honest and the turnaround tight – most parts arrive fast, and we tell you the timeline up front. If you want the full picture of what we cover, our Gate Access Control team handles the same work across the region.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Access Control Problems We See in Sunrise Manor Homes
Most Sunrise Manor homes are modest single-story houses built between the 1970s and 1990s, so what we fix here is overwhelmingly the original driveway and side-yard gates rather than new installs. Here’s what tends to go wrong:
- Dead control boards on aging operators. Heat and dust work their way into old boards until keypad entry or remote control just stops responding. The gate isn’t broken – the brain running it is.
- Keypads and card readers cracked by the sun. Mounted on exposed posts, these units take full UV year-round and lose function after a few seasons of grit and glare.
- Missing or misaligned safety photocells. Many gates here were hung before UL 325 entrapment protection was standard, so the operator runs but the photo-eyes are gone or aimed wrong. That’s a safety problem, not just an inconvenience.
- Hinge posts shifted in shallow concrete. The original 1980s posts were set in shallow footings that crack in the desert soil, so a simple hinge or board repair can turn into resetting the post and correcting the sag.
That last one is the hook a lot of generic advice misses. In Sunrise Manor, a post reset often comes before any electronics fix will hold. Here’s how a typical job usually goes: an older LiftMaster or Linear operator on a 1980s swing gate stops responding, the original control board has corroded or the keypad has failed after years of heat and dust, and the fix means replacing the obsolete board and adding safety photocells. But the person doing the work frequently finds the hinge post has shifted in cracked shallow concrete – so the board swap becomes a post reset and sag correction before the gate will run right.
That’s the retrofit-or-replace call this page is really about. Some of these gates can be brought up to modern function and safety with a new board and photocells. Some can’t, because the posts and hardware are past saving, and replacing is the cheaper answer over a couple of years. We’ll show you which side of that line your gate is on before you spend anything. Show us the gate closing on its own and we’ll show you where it’s failing.
Pricing for Gate Access Control in Sunrise Manor, NV
Prices here reflect the older housing stock, so a lot of jobs come down to a board replacement or a keypad swap rather than a full operator. A typical keypad entry replacement in Sunrise Manor runs $150 – $350, including wiring repair when the old low-voltage line has gone brittle. Remote and receiver diagnosis and repair is usually $95 – $250. Phone entry or card reader installation runs $250 – $550 depending on the interface your board can handle. Adding safety photocells to a legacy operator is typically $150 – $350. A full operator replacement, when the old board can’t be retrofitted, lands around $650 – $1,400 installed. What moves the number is whether a post reset is needed and whether the wiring is salvageable. Every price is quoted and agreed before any work starts – no estimate changes at the door. The estimate itself is free.
We Also Serve Cities Near Sunrise Manor
Sunrise Manor sits right up against the rest of the valley, and we work the neighboring communities too – Whitney, Winchester, Las Vegas, and North Las Vegas. If you’re just over the line in any of them, the same honest, repair-first approach applies. You can read more about how we handle Gate Access Control in Sunrise Manor and the surrounding area on our city page.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Access Control in Sunrise Manor
Often the board can be replaced with a modern unit while keeping your existing operator and gate. On Sunrise Manor gates, the corroded board is usually the failure, not the motor, so a board swap plus fresh photocells is the common fix. When the motor itself or the post footing is gone, replacement is the cheaper answer, and we’ll show you both numbers so you can decide. Call (833) 780-1547 for a free estimate.
Yes – if your gate was hung before UL 325 entrapment protection was standard, it likely has no working photo-eyes or edge sensors, and adding them is the right call for safety and for keeping the operator from running blind. This is a genuine hazard, and we recommend a trained professional handle it rather than wiring it yourself. We’ll check yours and quote the addition up front.
It’s usually one or the other, and the two look alike from the driveway side. On sun-baked Sunrise Manor posts, the keypad housing cracks and the low-voltage wire underneath goes brittle, so we test both before replacing anything. That way you’re not paying for a new keypad when the real problem is the wire. Call (833) 780-1547 for an exact quote – estimates are free.
Sometimes – it depends on whether your board can talk to a modern interface. Many older operators in Sunrise Manor can take a phone-entry or smart-access module with the right adapter, but some can’t, and we’ll tell you straight rather than sell you something that won’t work. If the board needs replacing first, we’ll lay out the total before starting.
It very often is. A post that’s shifted in Sunrise Manor’s cracked shallow concrete throws the gate off its swing, and the operator reads that resistance and reverses for safety. Photocells and board faults can cause it too, so we check all three. Fixing the panel without the post means you’ll fix it twice, so we start where the problem actually lives.
The gate in your driveway is worth fixing right. If it’s a keypad that quit, a remote that won’t reach, or a legacy operator that needs modern safety, call (833) 780-1547 for a free estimate. A live person answers, we quote before we start, and the 90-Day Done Right Promise is in writing on every job.
Written by the team at Gatewood Fence & Gate Enterprise.