Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Summerlin
When a driveway gate starts dragging, catching on the concrete, or reversing for no reason, you want somebody who knows Summerlin iron, not a national outfit reading off a script. We’re local and owner-operated, our technicians bring up to 25 years of experience to every job, and we weld on site so your gate stays in your driveway instead of getting hauled off for a week. Most gate repairs in Summerlin are finished same day once we’ve seen the gate. Call (833) 780-1547 and a live person answers, day or night.
Why Gatewood Fence & Gate Enterprise Is Summerlin’s Preferred Gate Parts & Welding Company
We’ve built a real reputation in Summerlin the old-fashioned way: showing up in the window we promised, pricing it up front, and standing behind the work with our 90-Day Done Right Promise in writing. Homeowners here talk, and the feedback we get most is that we fix what other companies wanted to replace. That matters in a community where a gate is part of the streetscape, not just a piece of hardware.
Response times to Summerlin are quick because we know the roads – Sahara, Hualapai, the 215, the curves through The Ridges and Red Rock Country Club. When you call, you get a real person, not a voicemail or a queue three states away, and we’ll tell you honestly whether it’s a hinge, a post, or an operator before anyone touches a tool. Free second opinion on any written estimate you already have. No trip charge inside the county.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Summerlin
This is repair-first work. A gate sags in the hinge post, not in the middle – and that’s where we start. Fix the panel without the post and you’ll fix it twice.
Hinge Replacement in Summerlin
On Summerlin’s wrought iron and steel gates, hinges take a beating from heat, dust, and weight the original build never accounted for. We replace worn hinges with hardware rated for the load, then re-hang the gate so it swings true instead of fighting the latch. If the hinge post has shifted – common in the caliche-heavy soil around here – we’ll tell you straight rather than bolt a new hinge to a moving post.

Post Replacement in Summerlin
Post replacement is where a lot of Summerlin gate problems actually live. Builder-grade operators and gates were set on posts that were never engineered for the added weight of automation, and over the years that footing gives. We dig out, reset, and re-anchor the post properly, then re-mount the gate and confirm the operator still lines up. Do it right and the sag stops coming back.

Rail Repair in Summerlin
Monsoon wind gusts bend rails and knock slide gates off the rack and pinion, and that’s the call we get most often after a storm. We straighten or replace damaged rail sections on site with our welding equipment, re-align the gate to the track, and get it running again. When the rail is part of an HOA-approved iron pattern, we match the finish so nobody flags it.

Custom Welding in Summerlin
Sometimes the fix is a weld, not a part. We weld broken hinge tabs, cracked frames, and custom brackets right in your driveway – on-site welding is the whole reason your gate doesn’t leave the property. On Summerlin’s contemporary iron and steel, that also means matching the community’s approved finish and spec so the repair passes ARC and HOA eyes without a second visit.
Trusted Brands We Service in Summerlin
We’re certified to service nine major gate brands, and the ones we see most on Summerlin homes are LiftMaster and Linear operators that came with the house, along with Elite and FAAC units on newer builds. We don’t claim to stock parts on a truck, but we know these systems inside and out and get the right replacement quickly. Whether it’s a control board, a photo-eye, or a hinge, we get you back to a working gate without the runaround.
Common Gate Parts & Welding Problems We See in Summerlin Homes
- Builder-grade operators on a gate never built for automation. Summerlin gates are overwhelmingly installed with the house, and the hinge post and panel fatigue earlier than they should because the whole assembly was spec’d manual. The operator usually gets blamed; the post is the real culprit.
- Photo-eyes and control boards cooked by UV and Red Rock dust. Relentless sun and blowing dust coat the lenses and cook the plastic housings, which is why so many Summerlin openers reverse for no reason or go dead at the keypad.
- Missing power and conduit runs. The low-voltage conduit for future automation rarely went in at build, so adding or upgrading an operator usually means trenching a new circuit and running conduit to the hinge post – not a simple swap.
- Monsoon wind damage stalled on HOA sign-off. Gusts bend rails or knock slide gates off the rack and pinion, and the repair waits on matching the community’s approved iron finish for ARC/HOA compliance.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Parts & Welding in Summerlin, NV
A typical hinge replacement in Summerlin runs $150 to $320 depending on hardware and how much re-hanging the gate needs. Post replacement, the bigger job, typically lands between $450 and $1,200 once we’ve reset the footing and re-mounted. Rail repair and on-site welding generally run $180 to $550, and a photo-eye or control board replacement on a LiftMaster or Linear operator usually falls in the $180 to $400 range. What moves the number: the condition of the post footing, whether the gate was built for automation, and finish-match work for HOA compliance. Every price is quoted and agreed before we start – no surprise invoice at the door. The estimate is free, and our standard offers apply: $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Summerlin
We take care of gate work all around the valley, including Spring Valley, Las Vegas, Winchester, and Paradise. If you’re just outside the Summerlin line, the same upfront pricing and on-site welding come with the job. Find our full Gate Parts & Welding in Summerlin coverage and nearby areas on the city page, or call and we’ll tell you straight whether you’re in range.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Summerlin
Yes, and it’s one of the most common jobs we do in Summerlin – but it’s more than bolting an operator on. Because the power and conduit runs usually didn’t go in at build, adding automation here typically means trenching a new circuit to the hinge post, confirming the post can carry the added load, and setting up the safety photocell and loop detector to spec. Call (833) 780-1547 for a free on-site measure and a written price.
Nearly always it’s the photo-eye sensor or the control board, not the gate itself. Desert dust coats the lenses and UV cooks the plastic housings, so the opener thinks something is in the way and reverses. We clean, test, and replace the eye or board as needed – and on a LiftMaster or Linear unit, usually in a single visit.
A sagging gate in Summerlin is most often the hinge post, not the hinge. The post takes the load, and in caliche-heavy soil a footing set for a manual gate can shift once an operator adds weight. We inspect the footing first; if it’s solid, new hinges and a re-hang fix it, and if it’s not, we reset the post so the sag doesn’t come back.
Often yes – much of Summerlin is HOA-governed, and that means matching the community’s approved iron finish and spec. We document the repair and match the palette so it clears architectural review, which is a big reason homeowners here call a local pro instead of a swap-and-go outfit. Call (833) 780-1547 and we’ll walk you through what your community requires.
Most Summerlin homes run a builder-grade LiftMaster or Linear operator that came with the house, with Elite and FAAC showing up on newer builds. We’re certified to service all of these plus BFT, Viking, Ghost Controls, DoorKing, and Mighty Mule. Whatever’s on your gate, we can diagnose it and get the right part fast.
Get Your Summerlin Gate Fixed Right
Whether it’s a dragging driveway gate, a cracked weld, or an operator that won’t stop reversing, we’ll take a look, tell you what’s actually wrong, and give you a price up front before any work starts. Our Gate Parts & Welding team is ready, our technicians bring up to 25 years of experience, and every job gets the 90-Day Done Right Promise in writing. Call (833) 780-1547 for a free estimate – a live person answers around the clock.
Written by the team at Gatewood Fence & Gate Enterprise.