Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Summerlin
If you’re searching for gate installation in Summerlin, NV, here’s the short version: most gate work in Summerlin is not a first-time install. It’s a retrofit. In the Mediterranean and Santa Barbara-style enclaves built through the 1990s and 2000s across The Ridges, Red Rock Country Club, and the Summerlin Centre area, the wrought iron, steel, or vinyl gate is usually already there with an electric opener bolted on. What fails is the operator, the power feed behind it, and the safety controls. We handle driveway, swing, sliding, pedestrian, and security gates across Summerlin, and we’ll give you a real written number before anything gets ordered or touched. Call (833) 780-1547 and a live person picks up, day or night.
Summerlin is a master-planned, HOA-governed community, and much of the gate work here lives behind architectural review. That changes the job. Matching the approved iron finish and documenting the install for ARC sign-off matters as much as hanging the iron straight.
Why Gatewood Fence & Gate Enterprise Is Summerlin’s Preferred Gate Installation Company
We’re the local gate specialist homeowners in 89135 call after a national outfit quoted one number on the phone and another at the door. Proudly serving local communities for over 29 years, and owner-operated since 2001, with a published address and license number anyone can look up. Our technicians have up to 25 years of experience, and every job carries the 90-Day Done Right Promise in writing: if it isn’t done right, we make it right, one call.
Summerlin customers call us back because we answer the phone, show up in the window we promised, and quote upfront before the work starts. We don’t pull a gate off your property and haul it away when it can be welded and set right in your driveway. We service nine major brands, including LiftMaster, FAAC, BFT, and Mighty Mule, so a failed builder-grade operator underperforming on a sound iron gate is our kind of call.
Local knowledge is what keeps a Summerlin install out of trouble. We know the Red Rock/Spring Mountains wind corridor and the dust that rides it, we know the UV that cooks plastic sensor housings, and we know the HOA review process that decides whether your finished gate passes. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Installation Services in Summerlin
Whether you’re replacing a failed operator or adding a gate that was never there, our Gate Installation team handles the full range of gate types across Summerlin. Here’s how the main jobs break down.
Driveway Gate Installation in Summerlin
Your driveway gate is the one that gets used, and in Summerlin’s gated enclaves it’s usually wrought iron or steel on an existing post. When a builder-grade operator has given out, we rebuild rather than replace: verifying the hinge post and footing, sizing the operator for the gate, and running a proper power and conduit feed so a LiftMaster or FAAC unit isn’t fighting an extension cord. A driveway gate installation in Summerlin typically runs $3,200 – $9,500 depending on span, material, and whether a real power run is needed.

Swing Gate Installation in Summerlin
Most Summerlin swing gates we see were installed manual and later had automation bolted on without anyone checking the post. A gate sags in the hinge post, not in the middle, and that’s where we start. We confirm the post and footing before we hang anything, because adding a heavy operator to a tired post is how you buy a second repair. Swing gate work here runs $2,800 – $7,500 installed, and we set the operator up with UL 325 entrapment protection from the start.

Sliding Gate Installation in Summerlin
Sliding gates show up where a driveway has room to roll and where the community plan allows a track. The hidden cost is the slab and the conduit. Because so many Summerlin properties were built without a power run to the gate line, a sliding gate install usually means saw-cutting and pouring a track plus a proper conduit run. Sliding gate projects in Summerlin typically land between $4,500 and $12,000.

Security Gate Installation in Summerlin
For side-yard, pool, and perimeter gates, security means more than a latch. In HOA-governed Summerlin communities, a security gate install has to match the approved iron finish and spec and be documented for ARC sign-off. We handle the gate, the hardware, and the keypad or access entry, and we photograph the finished work so your HOA review has what it needs. Security and pedestrian gate installs in Summerlin run $1,800 – $6,000.
Trusted Brands We Service in Summerlin
Because most Summerlin gates arrived with contemporary automation already on them, the brands we see most are the ones builders favored: LiftMaster, FAAC, BFT, and Mighty Mule. We service all nine major brands, so if your operator is a Linear, Viking, Ghost Controls, DoorKing, or Elite unit, we know it. We don’t keep a parts warehouse, but we source the right board, motor, or sensor fast and get back out to Summerlin to install it. No guessing and no swapping a part that didn’t need swapping.
Common Gate Installation Problems We See in Summerlin Homes
- Builder-grade operators that underperform. The original developer put in a motor sized for a lighter gate or a shorter run. A “new gate” call in Summerlin is often really a motor-and-controls replacement on an iron or steel gate that’s still sound.
- No conduit or power run during the build. Many gates here were fed by a surface run or an extension cord. That wiring fails in desert heat and can’t carry a proper operator, which is why adding a solar opener or a real 120V feed comes up on nearly every retrofit.
- HOA and ARC approval. Almost every Summerlin gate is shared community or HOA-governed. A finished install has to match the approved iron finish and spec and be documented for sign-off. A simple swap alone won’t pass.
- Dust and UV killing sensors and control boards. Blowing desert dust coats photo-eye lenses and the sun cooks plastic housings. We’ve seen safety sensors fail on gates barely a few summers old, which is why new controls go in with a sealed housing and proper alignment.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Summerlin, NV
Here’s the honest range. A driveway gate installation in Summerlin typically runs $3,200 – $9,500, a swing gate $2,800 – $7,500, a sliding gate $4,500 – $12,000, and a pedestrian or security gate $1,800 – $6,000. What moves the number is whether a proper power and conduit run is needed, the gate span and material, the operator you choose, and whether UL 325 entrapment protection and keypad entry are part of the job. The operator itself is often the cheapest line item on a Summerlin retrofit, because the feed and the controls behind it are what failed. We quote and agree the price before any work starts, and the estimate is free; a free second opinion on any written estimate is always on the table, plus $40 off any repair over $200. No trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Summerlin
Summerlin sits close to a lot of the valley, and we cover the neighboring communities too. If you’re in Spring Valley, Las Vegas, Winchester, or Paradise and need a gate handled, we can help. You can read more about Summerlin coverage and the surrounding area, or just call and we’ll tell you straight what your gate needs.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Summerlin
Because the operator is the cheap part. In most Summerlin retrofits, the original build ran no conduit to the gate, so the old operator was fed by surface wiring or an extension cord.
A real install means a proper power and conduit run, a control setup with UL 325 entrapment protection, and often a keypad or loop detector. Add ARC/HOA documentation and the labor to do it right, and the feed and controls outrun the motor on the invoice. Call (833) 780-1547 for an exact quote; estimates are free.
In almost every case, yes. Summerlin is master-planned and HOA-governed, and much of the gate work in 89135 goes through architectural review.
That means the finished gate has to match the community’s approved iron finish and spec, and the work should be documented so your ARC review has what it needs. We photograph finished installs for exactly this reason. Call us and we’ll walk you through what your community typically wants to see.
Yes, and it’s a serious one. An operator without entrapment protection is a liability, and it’s a code compliance issue.
UL 325 requires entrapment protection on automated gates, and openers here often lost their sensors to dust and UV or never had them wired in properly. We set up the safety photo-eyes and controls as part of any install or repair. Call (833) 780-1547 and we’ll take a look.
Heat, UV, and dust. Summerlin’s extreme desert sun cooks plastic sensor housings, and windblown sand off the Red Rock and Spring Mountains coats photo-eye lenses until the beam can’t read.
Monsoon-season gusts also bend and knock gates off track, and surface temps on metal gates punish the hardware. It’s why we favor sealed housings and proper alignment, and why a quality operator installed right outlasts a cheap one bolted on without a real feed. Call for a free estimate and we’ll size the right setup for your gate.
Usually yes, and that’s one of the most common jobs here. The catch is that automation is only as good as the post and the power behind it.
We check the hinge post and footing first, confirm the gate is sized for the operator, then run a proper power and conduit feed before the motor goes on. Skip that and you’ll fix it twice. Call (833) 780-1547 for a free measure and a written price; that work is scheduled, not same-day.
Get a Free Gate Installation Estimate in Summerlin
If you’re in Summerlin and your gate opener has quit, your sensors keep failing, or you want to add automation to a gate that was installed manual, let’s talk. We’ll look at the post, the power feed, and the controls, and give you a written price before any work starts. Every job comes with the 90-Day Done Right Promise, and a live person answers the phone around the clock. Call (833) 780-1547 for a free estimate.
Written by the team at Gatewood Fence & Gate Enterprise.