Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterGate Motor & Opener Near You in Enterprise, NV
If your gate motor has quit and you’re searching for help near you in Enterprise, NV, here’s the short answer: you call us at (833) 780-1547, tell us the brand and what the gate is doing, and we’ll get a real person out to look at it. We answer the phone around the clock, so there’s no voicemail box and no queue three states away. Hal and the crew have been fixing gate operators across the Enterprise area for years, and we service all nine of the major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Most people who call aren’t looking for the cheapest bid. They’ve already had one of those. They want a name they can verify, a shop down the road, and someone who shows up when they said they would. That’s what we do. You can read more about our full Gate Motor & Opener service in Enterprise or just pick up the phone.
Key Takeaways
- Live person answers every call, 24/7 – no voicemail, no call queue.
- Same-day and next-day appointments are common across Enterprise and nearby areas.
- We repair first. On-site welding means your gate stays in your driveway.
- 90-Day Done Right Promise in writing on every job.
- Certified on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Fast, Local Gate Motor & Opener Service
Here’s what “fast” actually means with us. When you call during the morning, there’s a real chance a tech is on his way the same afternoon. Enterprise is compact enough that we can usually get to you quickly, and we don’t waste the first visit on a sales pitch. We come out, listen to the gate cycle, watch where it binds, and test the motor under load. That’s the whole first step.
We service gate operators on driveways, RV gates, courtyard gates, and commercial entries across the area. LiftMaster and Viking are common on sidewalk-opener setups here in Enterprise; Linear and Elite show up on older residential swing gates; DoorKing and FAAC handle heavier commercial arms. If your gate is doing something odd – reversing halfway, groaning, stopping mid-travel, or just clicking when you hit the remote – that’s a motor, sensor, or control board issue, and it’s worth a look before it becomes a full replacement.
We don’t hedge on this: our pricing is upfront, always. No trip charge inside the county. Free second opinion on any written estimate another company left you. And if it turns out the previous installer cut corners, we’ll tell you that too.
What Brings Us Out on a Motor Call
Most gate motor calls we get in Enterprise fall into a handful of buckets. Knowing which one you have helps us plan the right visit:
- Gate won’t move at all. Dead operator, tripped breaker, or a control board that gave out. Simple to diagnose, sometimes slow to source parts on older brands.
- Gate reverses or stops halfway. Usually photo-eye alignment, a bind in the track or hinge, or a bad limit switch. Safety sensors are non-negotiable – we don’t bypass them.
- Gate opens by itself. Interference, a bad remote, or a control board stuck in a loop. Sometimes it’s a neighbor’s opener on the same frequency.
- Motor runs but doesn’t move the gate. Often the drive gear, chain, or arm. Sometimes it’s a mechanical bind the installer missed.
- Battery backup is dead. Systems with backup batteries (LiftMaster and Ghost Controls run these often) fail quietly during our summer heat.
A quick note on safety here. Gate operators exert serious force – enough to hurt a child or damage a vehicle in an instant. If your gate is reversing inconsistently or the safety sensors aren’t triggering, don’t run it until someone checks it. That’s not a sales line; it’s the reason we take photo-eyes and reverse tests seriously on every visit.
Areas We Cover
We’re based in and around Enterprise, and we cover the whole valley. If you’re in Spring Valley, Paradise, or Winchester, we’re close. Summerlin and Henderson are regular stops. Whitney and Sunrise Manor we handle weekly. The whole Las Vegas valley is in range, and no trip charge applies anywhere inside Clark County.
If you’re not sure whether your address is in our service area, just call and ask. The name is on the shop and the shop is down the road – that’s the oldest accountability there is.
Why People in Enterprise Call Us Back
A few things separate us from the national outfits – and we’re not being cute about this:
- Calls answered by a live person, 24/7. Not a chatbot, not a callback queue.
- Repair first. Hal fixes the gate in your driveway instead of hauling it off. On-site welding means the post, hinge, and panel get addressed together – because fix the panel without the post and you’ll fix it twice.
- 90-Day Done Right Promise in writing. If it isn’t right, one call brings us back. No runaround, no hedge language.
- Upfront pricing. $40 off any repair over $200, no trip charge inside the county, free second opinion on any written estimate, and 10% off for seniors and veterans – permanent, no haggling.
- Up to 25 years of experience under our belts. Not one guy learning on your gate.
- Locally owned and owner-operated. The name is on the shop and on every invoice.
We service all the brands that matter in this market, and we know which ones are common in which Enterprise neighborhoods. If your gate is the original install from the builder, it’s probably a Linear or LiftMaster swing operator, and there’s a good chance the photo-eyes have never been aligned since day one.
How It Works When You Call
- You call (833) 780-1547. Live person answers, day or night.
- We ask a few questions. Brand, gate type, and what the motor is doing. That tells us whether to bring a control board, a gear set, or both.
- We schedule a window and show up in it. No “sometime between 8 and 5.” We give you a real window and keep it.
- We diagnose on-site and quote upfront. You know the number before we turn a wrench.
- We repair, often on the spot. Welding included when a hinge or post needs attention.
- We walk the gate with you. Cycle it, test safety reverse, and confirm everything works before we leave.
- You get the 90-Day Done Right Promise in writing. Standard on every job.
FAQs
How fast can you get to my gate in Enterprise?
Same day when you call in the morning, and next day on almost everything else. Enterprise is compact, so travel time rarely slows us down. For after-hours calls, a live person answers and we’ll schedule the earliest window that works – call (833) 780-1547 for a free estimate.
Do you serve my area?
Yes, if you’re anywhere in the Las Vegas valley. Enterprise, Spring Valley, Paradise, Summerlin, Winchester, Henderson, Whitney, and Sunrise Manor are all regular stops, and there’s no trip charge inside Clark County. Call and give us your cross streets – we’ll confirm in a minute.
How much does gate motor repair cost?
Most residential motor repairs land between $150 and $450, depending on the brand and part. Control boards and gear sets run higher; sensors, remotes, and limit switches usually run lower. Commercial operators and full replacements are quoted upfront on-site. We don’t quote firm numbers over the phone and then change them at the door – upfront pricing is the whole promise. We’ll give you a real number after we see the gate. Call (833) 780-1547 for a free estimate.
Do you answer after hours?
Yes – a live person answers every call, 24 hours a day, 7 days a week. Not a voicemail, not an answering service. If your gate is stuck open and you’re not comfortable leaving it, call now and we’ll get moving on it.
Get a Free Estimate
If your gate motor is acting up and you want a straight answer from someone who’ll actually show up, call us at (833) 780-1547. The call is free, the estimate is free, and if it’s a simple fix you’ll know before we leave the driveway. Hal and the crew are ready when you are.
Written by the team at Gatewood Fence & Gate Enterprise, serving Enterprise and nearby areas.
What Our Customers Say
"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo