Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Access Control Across Enterprise
If your keypad stopped taking codes or your community gate won’t open after a dust storm, we can help. We work on gate access control across Enterprise every week, from the tract-homes off Mountain Vista to the gated townhome clusters near the 215, and we know how these gates were built because we see the same ones block after block. When wind packs sand into a slide gate and the call box goes dead, that’s a repair we do same-day where we can. Call (833) 780-1547 and a live person picks up, day or night.
Why Gatewood Fence & Gate Enterprise Is Enterprise’s Preferred Gate Access Control Company
We’re locally owned and owner-operated, and the name is on the shop and on every invoice. Enterprise customers call us because the person who answers knows the difference between a dead photo-eye and a dead control board, and because our technicians have up to 25 years of experience working desert gates.
Every job in Enterprise carries the 90-Day Done Right Promise in writing. If we fixed the keypad and it quits, one call brings us back. No runaround. We also offer a free second opinion on any written estimate, so if another shop told you the whole operator needs replacing, we’ll look at it and tell you straight.
We know Enterprise’s quirks: the caliche under these lots, the way June heat cooks a solar opener board, the recorded CC&Rs that decide what replacement call box your association will actually approve. Our standing offers are simple – $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. And a real person picks up the phone around the clock.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Access Control Services in Enterprise
Keypad Entry in Enterprise
The keypads on Enterprise community gates and side-yard gates take a beating from the sun, and the plastic housings crack within a few seasons. We replace and reprogram them, including multi-code setups for HOAs that need a separate code for residents and vendors. If your keypad works all summer and fails after a dust storm, the pad is usually fine and the wiring or the operator’s board is the problem. We test both before touching anything.

Phone Entry in Enterprise
Phone entry systems are common on the gated townhome clusters here, and they’re the ones that suffer most from heat and power hiccups. When a phone entry unit drops calls or refuses to dial out, the culprit is often a baked control board or a battery backup that’s aged out. We diagnose the whole chain rather than swapping the unit and hoping.

Remote Control and Transceivers
Remotes and receivers on Enterprise gates fail for boring reasons: dead batteries, worn buttons, and a receiver tucked in a control box that gets 110°F in July. We test the remote, the receiver, and the operator together so you’re not buying a new remote to fix a receiver problem.

Card Reader Systems in Enterprise
Card readers on community gates in Enterprise get fouled by wind-blown sand, and the failure often looks like a dead reader when it’s really a dirty contact or a misaligned strike. We clean, re-seat, and test access credentials without making you replace a reader that still has life in it.
Video Intercom
A video intercom that won’t show the visitor is frustrating on a gated property. In Enterprise we see them fail when dust coats the camera lens or heat warps the housing. We repair and re-aim these so residents can actually see who’s at the gate.
Trusted Brands We Service in Enterprise
We’re certified to service nine major gate brands, and in Enterprise the ones you’ll see most on tract and community gates are LiftMaster, FAAC, Elite, and DoorKing. We don’t stock parts on a truck – we diagnose first, order what’s actually needed, and keep the turnaround as fast as the supply allows. Because so many Enterprise gates share operators and call boxes installed during the 1990s and 2000s build-out, we know what’s inside them and what tends to fail first. If someone wants to sell you a whole new operator when a $90 part would fix it, get a second opinion from us free of charge.
Common Gate Access Control Problems We See in Enterprise Homes
- Sand- and wind-packed rack and pinion plus fouled photo-eyes. After a monsoon dust event, a slide gate’s photocells get coated and the operator reverses mid-travel or flat refuses to close. It’s almost always a dirty or misaligned photo-eye paired with a worn roller, not a failed control board – so we clean, re-aim, and re-tension before replacing anything.
- Saturated caliche soil and wind load on solid infill gates. A swing gate’s hinge post was set in caliche-heavy desert soil, and when the ground saturates and wind pushes a solid panel, the post leans and the gate sags. On a sagging swing gate, the arm operator groans because the post moved – footing work comes before any operator adjustment.
- Summer heat baking control boards, solar panels, and keypad housings. With highs above 100°F most of the summer, phone entry and card reader systems drop out intermittently. The board warps, the battery ages out, the housing cracks. We chase the actual heat failure, not the symptom.
- Faded, cracked keypads and intercom housings from UV exposure. Powder-coated and vinyl housings crack within a few seasons under this sun, which lets sand and moisture in. A housing that looks fine on the outside may be full of grit inside.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Access Control in Enterprise, NV
Here’s roughly what access control work runs in Enterprise. A keypad replacement or reprogram generally runs $150 to $350 depending on the model and whether new wiring is needed. A phone entry or video intercom repair typically lands between $200 and $600, and a full card reader swap on a community gate runs $300 to $800. Diagnosing a dead photo-eye or a stuck operator usually adds $100 to $200. What moves the price is whether the board is still good, whether the housing is cracked, and whether the CC&Rs require a specific approved model. We quote and agree on the price before any work starts, and the free second opinion on a written estimate costs you nothing. Call (833) 780-1547.
We Also Serve Cities Near Enterprise
Enterprise sits close to several other communities we work in, including Spring Valley, Paradise, Winchester, and Henderson. Whether you need Gate Access Control in Enterprise or a repair a few miles over, the same crew and the same written promise apply. If you’re outside Enterprise, call anyway – we’ll tell you straight whether we can get to you.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Access Control in Enterprise
Use the manual release, but do it carefully. Most operators have a release lever or key that disengages the drive so you can push the gate by hand – check with your HOA or the operator manual for the exact release point, because forcing a gate that’s still engaged will damage the rack or the arm. If it’s a swing gate and you’re not sure how to release it, call us at (833) 780-1547 and we’ll walk you through it. Don’t try to force the gate open with a vehicle.
Because the failure isn’t electrical – it’s physical. A dust storm packs grit into the keypad’s contacts, the photo-eyes, and the operator’s moving parts, and that grit causes intermittent faults that clear up when the wind dies. The fix is a clean, re-aim, and re-seat, plus checking whether the housing has cracked and let sand inside. Call (833) 780-1547 and we’ll diagnose it properly.
Only if it matches what the CC&Rs specify. Enterprise’s master-planned subdivisions record approved styles, finishes, and often exact models for call boxes and readers, so a replacement that works but looks different can be rejected. We check the association’s approved spec before ordering, so the install passes and stays passed. Call for a free estimate and we’ll talk through what your CC&Rs allow.
On a sagging swing gate in Enterprise, the post is usually the culprit. A hinge post set in caliche can lean when monsoon rains saturate the ground and wind pushes a solid panel, and the operator groans because it’s fighting a gate that isn’t hanging straight. Fixing the panel without the post means you’ll fix it twice. We check the footing first, then the operator.
It has to trip when something blocks the gate – if it doesn’t, that’s a safety failure. A quick check: put a test object in the gate’s path and confirm the gate stops and reverses. But testing entrapment protection is a job for a trained pro, because getting it wrong on a heavy slide gate or a swing gate is genuinely dangerous. Call (833) 780-1547 and we’ll verify it properly.
Get Your Enterprise Gate Access Control Sorted Today
Whether it’s a dead keypad, a phone entry unit that quit after the last wind storm, or a community gate your HOA needs compliant, we’re ready to help. We quote upfront, agree on the price before any work starts, and stand behind every job with the 90-Day Done Right Promise. Call (833) 780-1547 for a free estimate.
Written by the team at Gatewood Fence & Gate Enterprise.