Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterGate Opener Repair Near Me in Enterprise, NV: Check the Board Before You Replace the Motor
If your gate opener quit in July, or right after a monsoon storm rolled through, don’t let anyone replace the whole unit before a tech tests the control board. In Enterprise, we’ve pulled plenty of perfectly good motors out of openers that stopped working because the board cooked in the heat or a surge burned the receiver – motors that had plenty of life left. Gate opener repair near me usually means a $150-$340 board-and-receiver fix, not a $900-$1,800 full replacement. Call (833) 780-1547 and a live person picks up, day or night, to talk through what your gate is doing.

Why Enterprise Openers Fail in July and August (Hint: It’s Not the Motor)
Enterprise sits in the Mojave, where summer highs push past 110°F and a metal operator housing bolted to a south-facing wall turns into an oven. Inside that housing, the control board’s capacitors swell and fail after weeks of sustained heat. The gate stops moving, and the natural assumption is the motor died. It usually didn’t.
Then come the monsoon storms, and the flash-flood electrical events spike voltage on hardwired openers that were never fitted with surge suppression. The receiver board burns and the motor is untouched. Two very different failures, same symptom: a gate that won’t budge. A tech who doesn’t test systematically defaults to “needs a new opener” – and you pay for a whole unit when a board swap would’ve done the job.
How We Tell the Difference
Our technicians have up to 25 years of experience, and the good ones don’t guess. They put a multimeter on the board and read what it tells them: if the motor has power coming in and won’t turn, that’s a motor. If the power stops upstream at the board, the motor was never the problem. Testing first is the whole difference between a repair and a replacement.
What to Check Before You Call
- Look at the housing. Is the operator on a wall that gets full afternoon sun? A scorched or discolored board area inside points to thermal failure.
- Think about the weather. Did the gate stop right after a storm? That points to surge damage on the receiver, not the motor.
- Listen. A motor that hums and doesn’t move is different from a completely dead panel. Note which one you’ve got.
- Check the rollers. On a sliding gate, worn or seized rollers add resistance. The motor runs hotter, and board life shortens. It’s a root cause, not a separate issue.
If any of that sounds like your gate, call (833) 780-1547. Free second opinion on any written estimate, and no trip charge inside the county.
The Sand-and-Roller Problem That Quietly Kills Openers
Wind-blown sand off the open desert edges of Enterprise grinds sliding-gate rollers and photo-eye sensors until they seize. When the rollers bind, the operator motor works against resistance it was never built for. It runs hot on every cycle, and the board pays for it. That’s why we check roller condition on every opener service call – a $40 roller set can save a board that costs far more. Fix the panel without the rollers and you’ll fix it twice.
What Gate Opener Repair Runs in Enterprise
Upfront pricing, no haggling, no surprise at the door. Here’s a rough picture of what common repairs run:
| Repair | Typical Range |
|---|---|
| Control board or receiver board replacement | $150 – $340 |
| Sliding-gate roller replacement (per roller) | $40 – $75 |
| Photo-eye sensor realignment or replacement | $90 – $180 |
| Battery backup replacement | $120 – $260 |
| Full opener replacement (when repair isn’t viable) | $900 – $1,800 |
Add $40 off any repair over $200, and seniors and veterans keep a permanent 10% discount. We carry LiftMaster, FAAC, BFT, and Linear parts, and when a board genuinely can’t be sourced or the unit is obsolete, we’ll tell you straight – then verify the replacement against your community’s approved equipment list.

Why Enterprise Gates Are a Little Different
Enterprise is a master-planned, HOA-heavy suburb of Las Vegas, and nearly every driveway gate, community gate, and side-yard gate falls under recorded CC&Rs that dictate style, color, and placement. That matters at repair time. On a genuine replacement, we check the replacement model against your association’s approved list before ordering – a 10-minute step that keeps a compliance letter out of your mailbox. Because these tract-home clusters went up fast in the 1990s and 2000s, we work block after block of identical gates, where one worn roller or misaligned sensor tends to show up across several neighbors’ units. Our Gate Motor & Opener page goes deeper on the full range of opener service we handle in Enterprise.
What Sets Gatewood Fence & Gate Enterprise Apart
We repair what other companies want to replace. On-site welding keeps your gate in your driveway instead of hauling it off. Every job carries the 90-Day Done Right Promise in writing – if the repaired board fails again within 90 days, we come back at no charge, one call, no runaround. And a live person answers 24/7, so a gate that fails at midnight isn’t a voicemail situation.
We service nine major brands, including LiftMaster, FAAC, BFT, and Linear, so there’s a good chance we already know your unit. You can start with our Gate Motor & Opener in Enterprise page to see the brands and setups we work on most.
FAQs
Most gate opener repairs in Enterprise run $150 to $340 for a control board or receiver replacement, with roller, sensor, and battery fixes often landing between $40 and $260. We quote upfront and don’t change the number at the door. Call (833) 780-1547 for an exact quote – estimates are free.
In most cases, yes. Because we test the board first, many summer heat failures and storm-surge issues get fixed on the first visit when we have the right part on hand. Call (833) 780-1547 and we’ll tell you honestly what the window looks like.
Repair is almost always cheaper when the motor is still good – a $150 to $340 board fix against a $900 to $1,800 replacement. We check the motor with a multimeter before recommending anything, so you’re not paying for a new unit you didn’t need. Call (833) 780-1547 for a free second opinion on any written estimate you’ve already got.
Because flash-flood electrical events spike voltage on hardwired openers that lack surge suppression, burning the receiver board while the motor stays intact. That’s surge damage, not motor failure, and it’s fixable. Call (833) 780-1547 and we’ll sort out what actually burned.
Get Your Gate Moving Again
Don’t let a heat-cooked board or a surge-burned receiver turn into a full replacement bill. Call Gatewood Fence & Gate Enterprise at (833) 780-1547 for a free estimate on gate opener repair in Enterprise – live person on the line, upfront pricing, and the 90-Day Done Right Promise in writing on every job.
Written by the team at Gatewood Fence & Gate Enterprise, serving Enterprise, NV.
What Our Customers Say
"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo