Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterWhat Driveway Gate Installation Costs in Enterprise, NV (And Why the Ground Changes the Price)
Driveway gate installation in Enterprise runs $1,800-$3,500 for a sliding single-panel gate with operator, $2,200-$4,000 for a dual swing gate, and roughly $300-$600 more if you tie into a community call box. Those ranges assume the hard part: breaking through caliche and anchoring posts into a block-wall setback, which is the rule in Enterprise, not the exception. Call (833) 780-1547 and we’ll talk through your wall and what’s under the dirt before we talk gate styles – because that ordering is what keeps a quote honest.

Why an Over-the-Phone Quote Changes at the Door Here
If an installer in Enterprise quotes you a number without asking about your block wall and what’s beneath it, plan on that number moving when they show up. Most of Enterprise was built in the 1990s and 2000s on desert scrubland, and the subsoil under those tract homes is caliche – a calcium carbonate hardpan that turns a post-hole digger into a useless stick.
Caliche isn’t dirt you loosen. It’s a cemented layer that has to be broken with a jackhammer and set with hydraulic cement. That’s not optional labor a crew can skip past; in Enterprise subdivisions it’s the standard starting condition. Post footings on soft-soil pricing guides don’t exist out here, and that difference alone adds $200-$600 before a single gate panel gets hung.
This is why we start with a footing assessment, not a catalog. Show me where the gate will sit and I’ll show you what the ground is going to do.
Realistic Enterprise Installation Ranges
National averages assume easy digging and no association rules. Neither holds in Enterprise. Here’s what the work actually runs when the footing is caliche and the CC&Rs are in play:
| Install Type | Typical Cost Range |
|---|---|
| Sliding single-panel driveway gate with operator | $1,800-$3,500 |
| Dual swing driveway gate | $2,200-$4,000 |
| Community call-box integration (add-on) | $300-$600 |
| Caliche footing break-out and hydraulic cement set | $200-$600 |
Those ranges move based on panel length, operator brand, and how stubborn the ground turns out to be. We quote upfront with no trip charge inside the county, and the price you hear is the price on the invoice. If another installer already handed you a written estimate that reads like a puzzle, get a free second opinion from us and we’ll read it line by line together.
The HOA Step That Has to Happen First
Enterprise is a master-planned, HOA-heavy suburb of Las Vegas, and nearly every driveway, community, and side-yard gate sits under recorded CC&Rs. Those rules dictate gate height, material, color, and sometimes the operator brand itself. Skip that step and you risk a forced removal at your own expense.
So before we hang anything, the association approval comes first. It’s a slower start and a cheaper finish.
Where On-Site Welding Saves You Weeks
Plenty of Enterprise homes have a block-wall opening that’s a little off the standard width. The usual answer is ordering a custom panel from a supplier and waiting. We don’t do the usual answer – our crew welds and fabricates on site, so a frame can be built to fit your exact opening without a factory lead time. The gate stays in your driveway, and you’re not waiting on a truck from three states away.

That same repair-first habit carries into every install we do. If you want the fuller picture of how we approach a new gate, see our Gate Installation page and our Gate Installation in Enterprise guide.
What the Desert Does to a New Gate
Enterprise sits in the Mojave, where summer highs push past 100°F and monsoon dust storms sandblast everything metal. That heat bakes operators and control boards, and the wind-blown grit grinds hinges and rollers down faster than most homeowners expect. A tired roller on one gate usually shows up on the neighbors’ identical units within a season, since these tracts went up fast and share the same hardware.
We’re wired for this climate and know the brands that hold up – LiftMaster, FAAC, Elite, and Mighty Mule among them. Our technicians bring up to 25 years of experience, and every job carries the 90-Day Done Right Promise stamped in writing. If something isn’t right, one call brings us back.
How the Install Goes, Start to Finish
Here’s the sequence we follow so there are no surprises:
- Footing assessment. We inspect the block-wall setback and test what’s under the surface before quoting a final number.
- HOA check. You confirm the approved style, color, and height with your association; we build to those specs.
- Caliche break-out. Posts are jackhammered through the hardpan and set with hydraulic cement.
- Fabrication and hang. Custom frames are welded on site to fit your opening, then the panel and operator go in.
- Call-box and testing. Community systems get tied in, and we run the gate open and closed until it’s right.
- Walkthrough and warranty. You get the written 90-Day Done Right Promise, and pricing is settled upfront.
FAQs
Most driveway gate installations in Enterprise land between $1,800 and $4,000, with sliding single-panel gates at the lower end and dual swing gates at the higher end. Caliche footing work adds $200-$600, and call-box integration runs $300-$600 more. Call (833) 780-1547 for an exact quote – estimates are free.
It’s the ground and the association rules. Caliche hardpan under Enterprise’s 1990s-2000s tract homes requires jackhammer work and hydraulic cement instead of a standard dig, and HOA CC&Rs limit material, height, and color. Those two factors together push cost above soft-soil national averages. Call (833) 780-1547 and we’ll price your specific wall and soil.
Yes. We weld and fabricate on site, so a custom frame can be built to match an unusual opening without ordering a non-standard panel and waiting weeks for delivery. Call (833) 780-1547 and we’ll take a look at the opening.
In Enterprise, yes. Nearly every driveway and community gate falls under recorded CC&Rs, which specify style, color, height, and sometimes operator brand. Getting approval first protects you from a forced removal at your own expense. Call (833) 780-1547 and we’ll walk through what your association typically requires.
Get a Straight Number Before You Commit
Get a footing assessment and an upfront price before you sign anything. We’re locally owned and owner-operated with a published address, calls answered by a live person 24/7, and no trip charge inside the county. Call (833) 780-1547 for a free estimate – and bring any written quote you’ve already got for a free second opinion.
Written by the team at Gatewood Fence & Gate Enterprise, serving Enterprise, NV.
What Our Customers Say
"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo