A Gatewood company - serving Enterprise, NV
Gatewood Fence & Gate Enterprise gate repair team

Gate Installation Cost in Enterprise - Honest Price Ranges, Free Written Quote

Real local price ranges for the work, then a free site survey and a written quote for your driveway. Groundworks, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Gate Installation Cost in Enterprise?

Most residential gate installation in Enterprise runs between $1,800 and $6,500 for a complete job, including removal of the old gate, posts, hardware and the new gate itself. A basic walk-through gate on a metal frame often lands near the low end, while a wide driveway gate with an opener, keypad and access control pushes toward the high end. Where your project falls on that range depends on the gate material, the width of the opening, and how much site prep the ground needs.

We give free estimates in writing, and the price you see on that estimate is the price on the invoice. No haggling, no surprise line items at the door. Call (833) 780-1547 and a live person picks up, day or night.

Gate Installation Cost Breakdown (2026)

Here is how the numbers break down for the Enterprise market this year. These are the ranges we quote and stand behind, and they include the labor, hardware and cleanup that a real install needs.

Item Typical 2026 Price Range
Walk-through gate (single, up to 4 ft wide) $1,800 – $3,200
Double driveway gate (steel or aluminum, 12 – 16 ft) $3,500 – $6,500
Ornamental iron gate, custom built $4,000 – $9,000
Chain link gate with posts $900 – $2,200
Vinyl or composite gate $1,600 – $3,800
New posts set in concrete (per post) $150 – $350
Gate opener installation (LiftMaster, FAAC, Mighty Mule, etc.) $700 – $2,200
Keypad or access control entry $350 – $900
Remove and haul away old gate $150 – $400
On-site welding repair or adjustment (if the frame needs it before mounting) $150 – $450

A driveway gate on a functioning motor with a keypad and a fresh set of posts is the most common full job we quote around Enterprise, and it usually lands somewhere between $4,000 and $7,000 once the pieces are added up. On the other side of the range, a plain walk-through gate that replaces an old one in the same spot can come in well under $2,500 because there is no groundwork to redo.

What pushes a number up: heavy steel, custom fabrication, long spans that need thicker posts, and running power out to a property gate that never had a motor before. What pulls it down: keeping the existing posts if they are sound, choosing aluminum over iron, and going with a manual gate you plan to open by hand.

What Affects Gate Installation Pricing in Enterprise

Enterprise is not the same job as a lot in the older parts of the valley, and pricing reflects that. A few things move the number more than anything else.

  • Gate material. Aluminum costs less than iron and holds up under sun without rusting. Iron and steel cost more, weigh more, and need stronger posts and anchors. Vinyl sits in the middle but has limits on width and wind.
  • Width and weight. A 16-foot driveway gate needs heavier hinge posts and thicker frames than a 4-foot walk gate. Wider means more material, more labor, and a sturdier opener.
  • Ground and post depth. Our desert soil out here is caliche-heavy in places and shifts with the seasonal moisture cycle. Posts set shallow will lean by summer. We set them in concrete deep enough to stay put, and that ground prep is baked into the estimate rather than tacked on later.
  • Power and access control. If the gate has never had a motor, running power and setting up a keypad or remote entry adds to the job. If there is already power and conduit at the gate, that cost drops away.
  • Old gate removal. Some properties have a gate that has never been taken down, concrete footings and all. Removing it and hauling it off adds a step, but we do it rather than leaving a pile in your side yard.
  • Style and finish. A stock gate is cheaper than a custom one built to match the fence line or a specific look. Custom fabrication takes more time and more welding, and the price reflects both.

One thing worth saying out loud: fixing a sagging gate by tightening the middle, or mounting a new gate on tired posts, is a fix you will pay for twice. A gate sags in the hinge post, not in the middle, and that is where we start. If the posts are shot, the new gate needs new posts or it will fail the same way.

How to Save on Gate Installation

There is no secret trick to a cheaper gate. The savings come from smart choices and from not paying for work you don’t need.

  • Keep solid posts. If the existing hinge posts are sound and straight, we can often set a new gate on them and skip the removal and concrete work. That alone can save several hundred dollars.
  • Choose aluminum over iron where it fits. Aluminum costs less, weighs less, and handles the Enterprise sun without rust. It is the right call for most homeowners who are not going for a full ornamental look.
  • Go manual if you can. A gate opener and access control add $700 to $2,200 or more to a job. If you open the gate by hand a few times a day, that money stays in your pocket.
  • Combine the gate with fence work. If the fence line is going up at the same time, the gate and fence share posts and footing work, and the whole job costs less than two separate visits.
  • Ask for the free second opinion. If you have a written estimate from another outfit, we will look at it at no charge. We have seen quotes for full replacements that needed a weld and a hinge adjustment.
  • Seniors and veterans get a permanent 10% off. No time limit, no fine print, ask and it applies.

A repair-first approach saves money too. Before anyone sells you a new gate, we look at whether the frame can be straightened and welded on site in your driveway. Often it can. If it can’t, we will tell you plainly and show you why. Call (833) 780-1547 for a free estimate and we will give you a number you can hold us to.

Your Gate Installation in Enterprise, Step by Step

Here is what a full install looks like from the first phone call to the gate closing on its own.

  1. Call and get a live person. We answer the phone around the clock. Tell us the width of the opening, the kind of gate you want, and whether it needs a motor, and we set a time to come out.
  2. On-site measure and written estimate. We walk the property, check the posts and ground, and hand you a written estimate with the full price. No numbers change at the door.
  3. Posts and footing. If new posts are needed, we dig, set them in concrete, and let them cure before the gate goes up. This is what keeps a gate from sagging a year later.
  4. Fabrication and welding on site. We build and weld the gate frame in your driveway when it needs fitting, so the gate fits the opening instead of the opening being forced to fit the gate.
  5. Hang the gate and set hardware. Hinges, latches and stops go on, and we adjust until the gate swings true and latches clean.
  6. Opener and access control. If you are going with a motor, we mount it, wire it, and set up the keypad or remote. We service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
  7. Walkthrough and promise in writing. We show you how it works, hand you the 90-Day Done Right Promise, and you keep the number. If something is not right in that window, one call brings us back.

Why Numbers Hold With Us

Most folks who call us have already had one bad estimate experience. A price quoted on the phone that doubled at the door, or a job that got “finished” and never quite worked right. We do it the other way. The name is on the shop and the shop is down the road, and that is the oldest accountability there is. You can drive over and look us in the eye.

We are owner-operated, and a live person answers the phone every hour of every day. No voicemail, no queue. Our technicians have up to 25 years of experience, and every job carries the 90-Day Done Right Promise in writing. There is no trip charge inside the county, and if you have a written estimate you are unsure about, bring it in for a free second opinion. For the full picture on gate styles, materials and what fits your property, see our Gate Installation in Enterprise page, and you can always start back at our home page for the whole range of what we do.

FAQs – Gate Installation Cost

How much does gate installation cost in Enterprise?

Most residential gate installations in Enterprise run $1,800 to $6,500, with a typical driveway gate on an opener landing around $4,000 to $7,000 once posts, motor and access control are added. Call (833) 780-1547 for an exact quote, and the estimate is free.

Is it cheaper to repair my gate or install a new one in Enterprise?

Repair is almost always cheaper when the frame and posts are sound. A hinge adjustment or an on-site weld usually runs $150 to $450, while a new gate starts around $1,800. We look at repair first and will tell you honestly when a replacement is the only fix that lasts. Call (833) 780-1547 and we will give you a straight answer.

How much does a gate opener add to the cost?

A gate opener and access control adds roughly $700 to $2,200 to the job, depending on the brand and whether power is already at the gate. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Call (833) 780-1547 for a quote on your opener.

Can you come out today and give an estimate?

Most estimates in Enterprise are set the same week, and we answer calls day or night. We work out the time window with you and show up in it. Call (833) 780-1547 and a live person will get you on the schedule.

Does the 90-Day Done Right Promise cost extra?

No. The 90-Day Done Right Promise is stamped in writing on every job at no charge. If something is not right within 90 days, one call brings us back. Call (833) 780-1547 with any questions before you commit.

Get Your Free Estimate Today

If your gate needs replacing, or you are not sure whether it can be repaired, call (833) 780-1547 and get a real number from a real person. Estimates are free, the price is upfront, and the job comes with the 90-Day Done Right Promise in writing. Seniors and veterans get a permanent 10% discount, there is no trip charge inside the county, and you can bring us any written estimate for a free second opinion. We are Gatewood Fence & Gate Enterprise, and we will be there.

Pricing reflects the Enterprise market as of 2026. Gatewood Fence & Gate Enterprise offers free estimates – call (833) 780-1547.

What Our Customers Say

★★★★★ 4.9 from 7+ reviews

"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."

- Ingrid Solheim

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

- Winston Achterberg

"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."

- Salvador Arredondo
Need Gate Repair help in Enterprise? Licensed & insured · 30-60 min response · free estimates
Call (833) 780-1547

Request a Free Estimate

Tell us what's going on in Enterprise. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch