Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Enterprise
If your driveway gate is shuddering, drifting, or refusing to close all the way, call Gatewood Fence & Gate Enterprise at (833) 780-1547. We fix gates across Enterprise, from the tract homes off the 215 to the walled communities near the Galleria, and most repair calls get someone out the same day. A gate that won’t latch is a real problem when the wind picks up, and you shouldn’t have to wait a week for a callback. We know this ground – the caliche under your yard, the sand that blows in off the desert, the CC&Rs that dictate what your gate is even allowed to look like. That’s half the job before a wrench ever comes out.
Why Gatewood Fence & Gate Enterprise Is Enterprise’s Preferred Gate Repair Company
Our technicians have up to 25 years of experience, and they’ve spent a good chunk of it working the same blocks of Enterprise you live on. We’re locally owned and owner-operated, which means there’s a name on the shop and on every invoice – not a call center three states over reading from a script. Enterprise customers call us back because we repair what other outfits want to replace, and because we weld and realign on site instead of hauling the gate off and handing you a bill for a whole new one.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right – one call brings us back, no runaround. We answer the phone around the clock, and the person who picks up is a person. For gate repair in Enterprise, that difference matters more than any ad.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Enterprise
Most of what we see in Enterprise comes down to a handful of failures. A gate sags in the hinge post, not in the middle, and that’s where we start. Fix the panel without the post and you’ll fix it twice.
Electric Gate Repair
Enterprise sits in the Mojave, and summer highs over 100°F bake gate operators, control boards, and solar panels until they quit. When your electric gate stops mid-cycle, the fault is often a heat-stressed board or a corroded connection, not a dead motor. We’re certified on LiftMaster and FAAC systems and can diagnose the operator itself before we touch anything else. Call (833) 780-1547 for same-day electric gate repair in Enterprise.

Automatic Gate Repair
False reversals are the classic Enterprise complaint. Sand off the open desert edge coats the photo-eye sensors and the gate reverses when nothing’s there. A gate closing on its own tells us where it’s failing, and we recalibrate sensors and loop detectors to match the operator the subdivision was built with. Automatic gate repair here is part tune-up, part grit-hardening.

Hinge & Post Repair
Solid-infill gates catch a lot of wind out here, and wind load cracks welds right at the hinge post. When flash-flood rain softens the caliche-heavy soil, footings shift and the whole gate goes crooked. We re-pour footings and weld on site so the gate stays in your driveway. Our Gate Repair team handles the post work and the hardware as one job.

Gate Realignment
A gate that’s out of alignment drags, binds, and wears its rollers to nothing. We realign the track and the panel together so it tracks clean through the full swing. In Enterprise’s fast-built tracts, that reset often solves three problems at once.
Trusted Brands We Service in Enterprise
We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Enterprise because so many community gates still run the same operators installed when the tracts went up – a LiftMaster or DoorKing unit your association put in twenty-odd years back. We don’t keep a parts warehouse and we won’t tell you otherwise. What we do is source the right part fast and get your gate working again without swapping things that don’t need swapping. If your brand isn’t on the list, call anyway and we’ll tell you straight whether we can help.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Enterprise Homes
- Wind-cracked welds at the hinge post. Solid infill gates take the brunt of desert wind, and the weld at the post is where it lets go. The gate sags and drags, and the longer it runs that way the more the panel bends.
- Sand-seized sliding rollers and fouled photo-eyes. Grit off the open desert edge grinds rollers down and coats the sensors until the gate reverses on nothing. It’s the single most common sliding-gate call we get in Enterprise.
- Shifted posts after a monsoon soak. Rain saturates caliche-heavy soil and the footing moves, throwing the gate out of alignment. Realigning the gate without fixing the footing won’t hold.
- Sun-cracked vinyl and faded powder coat. The intense sun cracks vinyl and powder-coated gates within a few seasons, especially on west-facing entries. Repairs have to match the existing finish, and often the HOA’s approved color too.
Pricing for Gate Repair in Enterprise, NV
You get a price quoted and agreed before any work starts, and it doesn’t change at the door. A typical hinge and post repair in Enterprise runs $150 – $400 depending on whether the footing needs re-pouring. Automatic gate repair, including sensor recalibration and roller replacement, usually lands between $200 and $550. Gate realignment runs $175 – $375, and weld and rust repair is $150 – $450. What moves the number is the operator, the footing, and how far the gate drifted before you called. We offer a free second opinion on any written estimate and no trip charge inside the county. Seniors and veterans get a standing 10% discount, and there’s $40 off any repair over $200.
We Also Serve Cities Near Enterprise
We work the neighborhoods around Enterprise too – Spring Valley, Paradise, Winchester, and Henderson are all in the rotation. If you’re just outside the Enterprise line and want the same repair-first approach, we’ll come out and take a look. Find the full picture of what we do for Gate Repair in Enterprise and the surrounding valley, or call and we’ll tell you what your gate needs.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Enterprise
Your gate almost certainly stops halfway because grit or dust has fouled the photo-eye sensors or a loop detector is misaligned, so the operator thinks something’s in the way. Desert sand is the usual culprit in Enterprise. We clean and recalibrate the sensors and check the operator board before assuming the motor is bad. Call (833) 780-1547 and we’ll get eyes on it – estimates are free.
Usually no. Replacing hinges alone rarely holds because the sag starts in the hinge post, not the hinge itself – and wind load on a solid-infill gate is what cracks that weld in the first place. The post and the panel have to be treated as one repair or the gate sags again within months. Call us for a look before you buy hinges you may not need.
Most operators have a manual release key or lever – check the operator body for the brand’s release point and follow the manufacturer’s instructions for your model before you force anything. A heavy gate can swing or drop fast once released, so keep clear and don’t try to hold it by hand. If the release won’t budge, call (833) 780-1547 rather than prying it – a seized mechanism is worth a real diagnosis.
Often yes. Enterprise is a master-planned, HOA-heavy suburb, and most driveway and community gates fall under recorded CC&Rs that dictate style, color, and placement – so a repair that changes any of those can trigger a violation even if the gate works perfectly. We match the association’s approved iron or vinyl design as part of the job. Show us the approved spec or the existing finish and we’ll keep the repair compliant.
Wind-blown sand off the open desert edge grinds rollout rollers and slides down faster here than in greener parts of the valley – and because these tracts were built in clusters, one worn roller often shows up on your neighbor’s identical gate the same season. Cleaning and replacing rollers plus a track realignment is the usual fix. Call (833) 780-1547 for a free estimate.
When your gate starts fighting you, don’t wait for it to fail completely. Call Gatewood Fence & Gate Enterprise at (833) 780-1547 for a free estimate on gate repair in Enterprise. Upfront pricing, a written 90-Day Done Right Promise, and a live person on the line around the clock.
Written by the team at Gatewood Fence & Gate.