Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Sunrise Manor
If your gate motor grinds, trips its breaker, or quits after a dust storm, we handle gate motor and opener work across Sunrise Manor, NV. We know this township block by block, from the rancho-style homes off Nellis Boulevard to the long driveways near Las Vegas Boulevard North in the 89110 ZIP code. Because so many Sunrise Manor gates sit on original 1970s-1990s posts, the fix usually starts at the footing, not the control box. Call (833) 780-1547 and a live person answers, day or night.
Why Gatewood Fence & Gate Enterprise Is Sunrise Manor’s Preferred Gate Motor & Opener Company
Sunrise Manor is an unincorporated township, and that shapes the work. Most homes here are modest single-story houses built between the 1970s and 1990s, which means we spend our days repairing and replacing aging original driveway and side-yard gates rather than installing new ones on fresh construction. That’s the opposite of the new-build suburbs, and it’s why our approach starts under the ground.
The 90-Day Done Right Promise is stamped in writing on every job. If something we touched isn’t right, one call brings us back. No runaround. We also offer no-hassle upfront pricing, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. You get the price before we start, not after.
Calls get answered by a live person around the clock. You can also drive to the shop and look us in the eye. That kind of accountability matters in a township where a gate is often the difference between a safe yard and an open one.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Sunrise Manor
We handle the full range of Gate Motor & Opener work, but in Sunrise Manor three jobs come up again and again: motor repair, solar openers for long rural driveways, and slide motors on wide gates.
Motor Repair
When a Sunrise Manor gate operator strains, trips, or stops mid-travel, the operator itself is often the victim, not the cause. Desert dust coats the mechanism, warped panels fight the motor, and before long the unit overheats and quits. We diagnose the whole chain – operator, hinges, track, and post – so we’re not just swapping parts that don’t need swapping. On-site welding keeps the gate in your driveway.

Solar Gate Opener
Out where mains power is impractical, a solar opener is the sensible answer for a long driveway. Sunrise Manor gets plenty of Mojave sun, but heat and dust still tax a solar array, so we size the panel and battery to the gate’s actual weight and cycle count. Panels and batteries get checked as part of the install so the system holds up through summer.

Slide Motor
Wide slide gates on long driveways are common in Sunrise Manor, and the rack and pinion is where dust storms do their damage. Grit jams the teeth, the operator strains, and the overload trips. We clear the track, inspect the footing, and get the gate rolling true again. A pro clears the track and tests the safety photocell before ever reaching for a new motor or control board.

Battery Backup & Intercom
We also set up battery backup so your gate still opens when the power drops, and intercom integration so you can see and talk to whoever’s at the drive before you let them in. Both matter on an acreage entrance where the gate is your front door.
Trusted Brands We Service in Sunrise Manor
We’re certified to service nine major gate brands, including LiftMaster, DoorKing, Elite, and Mighty Mule. That range means we can work with whatever operator is already on your Sunrise Manor gate instead of pushing you toward a replacement you don’t need. We don’t keep a parts warehouse, so if a board or motor has to be ordered, we tell you the lead time up front and schedule around it. The person who shows up is background-checked, and our technicians have up to 25 years of experience. Turnaround on common repairs is quick because the diagnosis happens on site.
Common Gate Motor & Opener Problems We See in Sunrise Manor Homes
These aren’t generic operator complaints. They trace back to this township’s specific soil, climate, and housing age.
- Dust storms jam slide gate tracks. Monsoon grit packs into rack and pinion teeth and the operator strains until its overload trips. Clearing the track and re-testing the safety photocell usually gets it moving again.
- Shallow post footings shift in the desert soil. Original 1980s gate posts were often set in shallow concrete that has cracked over the years, and a leaning post misaligns the gate and burns out swing operators. That’s why our work often starts with the footing.
- Heat warps wooden panels and seizes hinges. Extreme summer sun dries and cracks wood and locks up metal hinges, so the motor works harder than it should and fails early. Freeing the moving parts is half the repair.
- Aging original gates outlast their hardware. Many Sunrise Manor side-yard gates are the originals from the 1970s-1990s, and repeated panel swaps won’t fix a gate that sags in the hinge post. Fix the panel without the post and you’ll fix it twice.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Motor & Opener in Sunrise Manor, NV
Here’s what gate motor and opener work typically runs in Sunrise Manor, so you have a real number before you call.
- Motor repair: a typical slide or swing motor repair runs $180-$450, depending on whether a board, gear, or limit switch is involved.
- Post reset or footing work: resets and footing repairs commonly run $250-$600 when the original shallow post has shifted.
- New motor installation: a standard residential operator install runs $650-$1,400.
- Solar opener setup: solar gate opener systems typically run $800-$1,800, depending on panel and battery sizing for the driveway length.
The price is quoted and agreed before any work starts, and estimates are free. We also give $40 off any repair over $200 and no trip charge inside the county. Closest comparison: Sunrise Manor motor and footing work lands close to nearby Las Vegas pricing, but a failed original post adds a step other cities with newer construction don’t see. Call (833) 780-1547 for an exact quote.
We Also Serve Cities Near Sunrise Manor
We regularly work gate motors and openers well beyond the township line – in Whitney, Winchester, Las Vegas, and North Las Vegas. If you’re just over the boundary in any of those, you’ll find the same upfront pricing and the same written promise. Driving to your gate? Say the word and we’ll point you to it.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Sunrise Manor
Check the slide gate track and rack first. In Sunrise Manor, dust storms pack grit into the rack and pinion teeth, and the operator’s overload trips to protect itself. A qualified pro clears the track, tests the safety photocell, and checks the post footing before replacing a motor or board. Call (833) 780-1547 – estimates are free.
Yes. A solar opener handles a long rural driveway here well because Sunrise Manor gets strong Mojave sun year round. The key is sizing the panel and battery to the gate’s weight and how often it cycles. Heat and dust still tax the system, so panels and batteries get checked at install. Call us to size one for your drive.
It’s usually the hinge post. A gate sags at the hinge post, not in the middle, and that’s where we start. In Sunrise Manor’s rancho-style homes, the original 1980s posts were often set in shallow concrete that has cracked and shifted, so the gate misaligns and the operator fights it. Fix the panel without the post and you’ll fix it twice. Call (833) 780-1547 for a free second opinion.
Your gate should have working safety photocells that stop or reverse the gate when something blocks its path. That’s part of UL 325 entrapment protection, and it’s required on automatic gates. If you’re not sure whether yours works, have it tested – don’t guess. We test photocells as part of every repair in Sunrise Manor.
We service nine major brands, including LiftMaster, DoorKing, Elite, and Mighty Mule. That means the operator already on your Sunrise Manor gate can usually be repaired rather than replaced. Call (833) 780-1547 with the brand and model, and you’ll get a straight answer.
Frequently Overlooked: What a Sunrise Manor Motor Job Usually Looks Like
In Sunrise Manor’s rancho-style homes, a wide slide gate on a long driveway often starts tripping its operator after monsoon dust storms coat the rack and pinion and the loop detector misreads. A qualified local pro typically clears the track, tests the safety photocell and UL 325 entrapment protection, and checks whether the original 1980s post footing has shifted in the cracked desert soil before replacing a motor or control board. Because of that, motor work in Sunrise Manor routinely starts with post footing inspection, not the control box. Show us the gate closing on its own and we’ll show you where it’s failing. If you want the deeper walkthrough, see our Sunrise Manor page or call (833) 780-1547.
Written by the team at Gatewood Fence & Gate Enterprise.