A Gatewood company - serving Enterprise, NV
Gate Motor & Opener in Henderson, NV | Gatewood Fence & Gate Enterprise - Gatewood Fence & Gate Enterprise

Gate Motor & Opener in Henderson - Written Price, Install Date Set

Free on-site survey and a written price that includes the groundworks, the power run and the safety gear. Install date agreed before we order, and the system handed over tested and documented.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Motor & Opener Across Henderson

If your gate won’t open, won’t close, or stops halfway and beeps at you, we can help. We work on gate motors and openers all across Henderson – from the older single-story blocks near Water Street to the stucco tract homes off Horizon Ridge in Seven Hills and the newer builds up in Anthem. We know this city’s gates, we know its soil, and we know what its HOAs will and won’t approve. Most repair calls get a real look the same day, and you’ll talk to a live person when you call (833) 780-1547. No voicemail, no phone tree.

Call (833) 780-1547

Why Gatewood Fence & Gate Enterprise Is Henderson’s Preferred Gate Motor & Opener Company

We’ve built our name in Henderson one driveway at a time, and it shows in the calls we get from neighbors passing our number along. When we show up, you get a straight read on what’s wrong and a price quoted before anything gets touched – the number on your estimate is the number on your invoice. Our technicians have up to 25 years of experience, and we service nine major gate brands, so a 1990s LiftMaster or a newer FAAC doesn’t send us running.

Henderson homeowners have been burned before by outfits that quote one price on the phone and charge another at the door. We don’t play that game. Every job carries the 90-Day Done Right Promise in writing, and one call brings us back if something isn’t right. We also keep standing offers on the table: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate you’ve already got, and a permanent 10% discount for seniors and veterans.

What makes the difference in Henderson is knowing the ground and the rules. Anthem and Seven Hills sit on expansive desert soil that shifts as it dries, and the gate posts move with it. Green Valley and Anthem have design-review committees that care what your gate looks like, not just whether it opens. That combination is why a motor swap here is rarely just a motor swap. It’s also why we hand you the same person’s cell number and mean it.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Motor & Opener Services in Henderson

Motor Repair

Most failed operators don’t need to be replaced – they need a real diagnosis. In Henderson’s older stucco-on-frame neighborhoods, an operator often quits when a 1990s control board gives out after years of 100°F-plus summers, leaving the gate stuck open or cycling on its own. We test the board, check the safety photocell alignment, and look at the mechanical side before we recommend anything. Sometimes a hinge post has shifted and the motor is fine – the gate’s just dragging. This is our most common Henderson call, and it’s where our repair-first approach saves you the most.

Motor Repair

Motor Installation

When a unit genuinely predates modern UL 325 entrapment protection, or the board is obsolete and no compatible retrofit exists, a new operator is the cheaper answer over the long run. We measure the gate, match the operator to its weight and swing, and handle the power run and safety devices. Installation is scheduled, not rushed – we give you a free measure and a written price before anything gets ordered. We service LiftMaster, FAAC, and Mighty Mule units regularly, and we’ll tell you plainly which one fits your gate.

Motor Installation

Linear Motor

Linear operators are common on Henderson’s ornamental steel and side-yard gates, and they hold up well until UV and dry heat start working on the seals. We repair and replace Linear motors, source compatible boards when they’re available, and re-hang gates that have thrown the operator out of alignment. If your Linear unit is cycling erratically, there’s usually a reason beyond the motor itself.

Linear Motor

Slide Motor

Slide gates need a level track and a straight post to run clean, and in Henderson the ground doesn’t always cooperate. We service slide operators, check the rack and pinion for seized or rusted sections, and re-level tracks that have heaved after a monsoon or a dry spell. When a slide gate drags, the operator is often the victim, not the cause.

If you want to see the full range of what our Gate Motor & Opener team handles, it’s all on the service page. And if you’re new to the area, you can read more about Gate Motor & Opener in Henderson on our city page.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (833) 780-1547

Trusted Brands We Service in Henderson

We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Henderson because the gates here span decades – you’ll find a 1990s LiftMaster in one yard and a fresh BFT swing operator in the next. We don’t claim to stock parts locally; anyone who tells you they do is probably guessing. What we do is diagnose fast, source what’s needed, and get you a straight answer on turnaround. When a board has to be ordered, we tell you the window up front instead of leaving you guessing.

Common Gate Motor & Opener Problems We See in Henderson Homes

  • Obsolete control boards in pre-2000s operators. Sustained 100°F-plus summers cook these boards until they overheat and fail, and the gate ends up stuck open or cycling randomly. A retrofit board sometimes saves the unit; sometimes it’s the signal that the operator is past its years.
  • Hinge posts that shift in the desert soil. On golf-course-adjacent lots in Seven Hills and Anthem, expansive soils dry and settle, and the hinge post moves with them. The swing gate starts to drag, the operator strains to push it, and eventually the motor takes the blame for a post problem.
  • Faded powder-coat and dried-out seals. Intense UV and near-zero humidity fade finishes and dry seals, and then a monsoon downpour flash-rusts the hinges and seizes the rack and pinion. This is where a little maintenance goes a long way.
  • Posts thrown out of plumb by ground settling. The rare winter freeze and the wet-dry cycle both push posts out of true. A gate that looks fine can drag its swing arm on one side and not the other – that’s the tell.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Gate Motor & Opener in Henderson, NV

Here’s what the work actually runs in this market, quoted before we start. A board or control repair typically runs $180 – $360. A photocell or safety-device fix is usually $120 – $250. Hinge-post re-plumbing and re-hanging a dragging swing gate runs $250 – $550 depending on the post and hardware. A full operator replacement, installed, usually lands between $650 and $1,400 – Linear and Mighty Mule swing units sit at the low end, LiftMaster and FAAC at the higher end once safety edges and the power run are included. A battery backup add-on for a solar or standard opener runs $150 – $400. HOA paint or color-matched refinishing on a repaired gate adds $80 – $200 when the design review requires a specific approved finish. Every price is quoted and agreed before we touch a thing. Estimates are free, and so is a second opinion on any written estimate you already have.

We Also Serve Cities Near Henderson

We take calls throughout the area around Henderson, including Boulder City, Whitney, Paradise, and Enterprise. If you’re just outside the city line, call and we’ll tell you honestly whether we can get to you and when. No trip charge inside the county. Same straight pricing wherever you are.

Serving Henderson, NV – Our Local Coverage Area

We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Motor & Opener in Henderson

Get Your Henderson Gate Motor Fixed Right

Whether it’s a 1990s operator that finally gave out, a swing gate dragging in Seven Hills, or a battery backup that quit during the last outage, we’re ready to help. You’ll talk to a live person when you call, and you’ll get a price quoted before any work starts. Same-day and emergency availability, free estimates, and the 90-Day Done Right Promise on every job. Call us at (833) 780-1547 and let’s get your gate moving again.

Written by the team at Gatewood Fence & Gate Enterprise.

Why Henderson Chooses Gatewood Fence & Gate Enterprise

We set the standard for gate motor & opener in Henderson.

30-60 Min Response

Fast dispatch across Henderson. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Henderson

Getting your gate motor & opener handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate motor & opener needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Henderson - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate motor & opener pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 30-60 min.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Henderson Customers Say

Trusted by homeowners across Henderson and surrounding areas.

★★★★★

"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."

Ingrid Solheim
★★★★★

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

Winston Achterberg
★★★★★

"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."

Salvador Arredondo

Ready for Gate Motor & Opener in Henderson?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Henderson.

(833) 780-1547

Request a Free Estimate in Henderson

Tell us about your gate motor & opener needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch