A Gatewood company - serving Enterprise, NV
Gate Motor & Opener in Enterprise, NV | Gatewood Fence & Gate Enterprise - Gatewood Fence & Gate Enterprise

Gate Motor & Opener in Enterprise - Written Price, Install Date Set

Free on-site survey and a written price that includes the groundworks, the power run and the safety gear. Install date agreed before we order, and the system handed over tested and documented.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Motor & Opener Across Enterprise

If your community gate is stuck open, your driveway slide gate stops halfway, or your keypad won’t let a resident through, you’re in the right place. We work on gate motors and openers throughout Enterprise, from the gated clusters off St. Rose Parkway to the townhome entries along Eastern Avenue. Most of the gates here aren’t yours alone to fix: they sit under recorded HOA rules, and that shapes how a repair gets done. We know that reality and we work with it. Call (833) 780-1547 and a live person picks up, day or night.

Call (833) 780-1547

Why Gatewood Fence & Gate Enterprise Is Enterprise’s Preferred Gate Motor & Opener Company

Enterprise runs on gated communities. That means gate work here is usually about an association’s approved design, a shared entry system, and a management company that needs to sign off. Our Gate Motor & Opener team deals with those moving parts every week, so the approval side doesn’t stall the repair side. We give you a written, upfront price before anything gets opened up, and that price doesn’t move at the door.

Every job carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back. Our technicians have up to 25 years of experience, and they’re trained to repair first rather than start swapping operators that still have life in them. We serve Enterprise block by block, and we know the neighborhoods where one model of operator shows up on five streets in a row. For a free second opinion on any written estimate you already have, just reach out.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Motor & Opener Services in Enterprise

Motor Repair

Most dead gate operators in Enterprise aren’t actually dead. They’ve got a clogged photo-eye, a heat-cooked control board, or a rack packed with desert sand. We diagnose the real failure before anyone quotes a new motor, and we tell you plainly whether a repair makes sense or a replacement does. Repair-first saves you real money, and we’re not shy about saying so.

Motor Repair

Slide Motor

Sliding driveway gates are common in Enterprise’s master-planned subdivisions, and they take a beating from sand off the open desert edges. A slide gate that drags or stops mid-travel usually points to worn rollers and a misaligned safety sensor, not a spent motor. We service the rack and pinion, check the hinge post and its footing, and get the gate moving cleanly again while keeping the association’s approved look intact.

Slide Motor

Motor Installation

When replacement is the right call, we measure and schedule it, then quote a written price before work starts. In Enterprise that often means matching the exact operator model your community already runs so the shared remotes and access codes keep working across units. We handle the electrical and the setup, and we make sure the finished install fits what the HOA has approved for style and placement.

Motor Installation

Intercom Integration

Gated communities here lean on call boxes and intercoms installed when the tracts went up. When a keypad fails or a resident can’t buzz a guest in, we trace the fault through the intercom, the access controller, and the operator together. On a community entry, that system ties the whole street together, so fixing it properly matters. We sort the integration so residents, guests, and delivery drivers all get through again.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (833) 780-1547

Trusted Brands We Service in Enterprise

We service nine major gate brands, including LiftMaster, Linear, FAAC, and BFT. We don’t keep a parts warehouse or stockpile inventory, so we won’t promise you a part is sitting on a shelf. What we do offer is an honest diagnosis and a fast turnaround once the right part is in hand. If your operator is a Mighty Mule, a LiftMaster, or something older, we can usually tell you what’s wrong on the first visit and get you a straight answer on cost and timing.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Motor & Opener Problems We See in Enterprise Homes

  • Sand-packed rollers and fouled photo-eyes. Wind-blown sand off the desert edges grinds sliding-gate rollers and clouds the sensor lenses, which trips the operator’s entrapment protection and stops the gate cold. It’s the single most common call we get in Enterprise.
  • Heat-baked control boards and batteries. With summer highs past 100°F, operator control boards, solar panels, and battery backup cells take a beating. That shows up as intermittent operation or a gate that won’t respond at all.
  • Post shifting from monsoon rain. Flash-flood rain moves gate posts set in caliche-heavy desert soil, throwing slide gates out of alignment and putting strain on the rack and pinion. A gate that used to glide can start binding after one heavy storm.
  • Sun-cracked housings and faded finishes. The intense valley sun cracks vinyl and powder-coat on operator housings and gate panels within a few seasons. On HOA-controlled gates, that cosmetic wear can put you out of compliance as much as a mechanical failure.

Pricing for Gate Motor & Opener in Enterprise, NV

Here’s what gate motor and opener work runs in Enterprise’s market. A typical motor repair, like replacing a control board or servicing the rack and pinion, runs $140 – $320. A slide-gate roller and alignment service usually lands between $180 and $400. A full motor installation, with a new operator and the electrical hookup, typically runs $650 – $1,400 depending on the model and whether it’s a shared community gate. Intercom or keypad integration work usually runs $150 – $450. What moves the number is the brand, whether the gate is shared, and how much of the assembly needs replacing. We quote and agree the price before any work starts, so the invoice matches the estimate. Estimates are free, and there’s a $40 discount on any repair over $200.

We Also Serve Cities Near Enterprise

We work the gated communities and driveway gates around Enterprise throughout the south valley. If you’re in Spring Valley, Paradise, Winchester, or Henderson, we cover your area too. The same HOA realities and desert conditions apply, and the same upfront pricing goes with them. Call and we’ll confirm timing for your address.

Serving Enterprise, NV – Our Local Coverage Area

We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Motor & Opener in Enterprise

Why Enterprise Chooses Gatewood Fence & Gate Enterprise

We set the standard for gate motor & opener in Enterprise.

30-60 Min Response

Fast dispatch across Enterprise. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Enterprise

Getting your gate motor & opener handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate motor & opener needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Enterprise - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate motor & opener pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 30-60 min.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Enterprise Customers Say

Trusted by homeowners across Enterprise and surrounding areas.

★★★★★

"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."

Ingrid Solheim
★★★★★

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

Winston Achterberg
★★★★★

"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."

Salvador Arredondo

Ready for Gate Motor & Opener in Enterprise?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Enterprise.

(833) 780-1547

Request a Free Estimate in Enterprise

Tell us about your gate motor & opener needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch