A Gatewood company - serving Enterprise, NV

Frequently Asked Questions

Frequently Asked Questions About Gate Repair in Enterprise, NV

Below are the questions we get asked most often by homeowners around Enterprise, from what a repair actually costs to whether we’ll be there the same day. Every answer is the short version up front, so you can stop reading as soon as you have what you need.

Pricing & Estimates

How much does gate repair service cost?

Most residential gate repairs in the Enterprise area land between $150 and $450 depending on the problem, and we’ll give you an exact upfront number before we touch anything. A hinge or latch adjustment is usually at the low end. A bent panel, a failed swing gate opener, or a driveway gate frame repair runs higher. We quote the same price on the phone that we charge at the door, so nobody gets a surprise when the invoice shows up.

  • Hinge, latch, or sag adjustment: roughly $150 to $275
  • Welding and frame straightening on-site: roughly $200 to $400
  • Gate opener diagnostics and repair: roughly $225 to $500
  • Access control or keypad replacement: roughly $250 to $600

Those ranges are based on what we see daily in Enterprise and the surrounding neighborhoods. The only way to get a locked-in figure is to let us look at it. Call (833) 780-1547 and the estimate is free.

Do you offer free estimates?

Yes, estimates are free, and we even give a free second opinion on any written estimate you already have in hand. If another company quoted you a full replacement and you’d like a repair-minded set of eyes on it, hand us the paperwork and we’ll tell you straight whether the job needs what they said it needs. That second opinion has saved more than a few Enterprise homeowners from a bill they didn’t need to pay.

Is it cheaper to repair or replace my gate?

For the large majority of sagging, sticking, or swinging gates, repair costs a fraction of replacement and lasts just as long when the repair is done at the real point of failure. A gate sags in the hinge post, not in the middle, and that’s where we start. Fix the panel without the post and you’ll fix it twice. We only recommend replacement when the frame or posts are structurally too far gone to weld back true, and we’ll show you why before you spend a dollar.

What are your standing offers and discounts?

We keep a few offers standing so you don’t have to haggle for them. Here’s what’s always on the table for Enterprise customers:

  • $40 off any repair over $200
  • No trip charge inside the county
  • Free second opinion on any written estimate
  • A permanent 10% discount for seniors and veterans

These apply on every qualifying job, no coupon code needed. Ask when you call and we’ll fold it right into your upfront price.

What payment methods do you accept?

We take cash, checks, and the major credit and debit cards. Payment is due when the job is done and you’re satisfied with it, not before. If you have a question about how a particular job will be billed, ask the person on the phone when you call.

Service & Scheduling

Do you offer emergency gate repair service?

Yes, we handle emergency gate repair in Enterprise around the clock, and a live person answers when you call, day or night. A gate stuck open or jammed shut is a security problem, not just an annoyance, and we treat it that way. There’s no voicemail, no dispatch queue, no call center three states away. You get a human who can tell you whether it’s worth waiting for morning or whether it needs attention now.

How fast can you respond?

For most calls inside the county, we can be on-site the same day, and emergencies get priority. Because there’s no trip charge inside the county, there’s nothing stopping us from getting out to look at it quickly. The window we give you on the phone is the window we hold. If something shifts, you hear from us, not the other way around.

What areas do you serve?

We serve Enterprise and the surrounding towns and rural counties, and our shop is right down the road so you can come by in person if you’d rather look us in the eye. The name is on the shop, and the shop is local. That’s the oldest kind of accountability there is. If you’re unsure whether you’re inside our range, call and ask; it’s a quick answer.

Can you come today?

In most cases, yes. Same-day visits are standard for repair calls inside the service area when you reach us before the day fills up, and we’ll tell you honestly at the time of booking. Call (833) 780-1547 and we’ll find the soonest slot that works with your schedule.

Licensing & Trust

Are you licensed and insured?

Yes, we’re licensed and insured, and we’re happy to share the details. Our address and license number are published and anyone can look them up, and the name is on every invoice that leaves the shop. When you’re hiring someone to weld on a gate at your home, you deserve to verify who you’re letting onto the property. Ask for the paperwork and we’ll provide it without a fuss.

Do you guarantee your work?

Yes, every job carries our 90-Day Done Right Promise, stamped in writing on the work order and stated plainly. If something we repaired isn’t holding up within that window, one call brings us back to make it right, no runaround. We don’t hedge it with “in most cases” or “up to.” If it’s not done right, we make it right.

Who actually shows up to do the work?

A background-checked, uniformed technician shows up in the window we promised, and on many jobs it’s Hal himself. We don’t send a faceless crew; you’ll know who’s on your property and why. That’s part of why customers around Enterprise tend to call us back the next time a gate acts up.

What brands can you service?

We’re certified to service nine major gate and opener brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your opener or access system is one of those, we’ve worked on hundreds like it and know the parts that fail first. If it’s a brand we don’t list, call and we’ll tell you honestly whether we can help.

Our Gate Services

Do you handle gate repair?

Yes, gate repair is the core of what we do, and our philosophy is repair-first, always. We weld on site, so the gate stays in your driveway instead of getting hauled off for a week. Hinge repair, frame straightening, sag correction, latch and lock work, and post reinforcement all happen right where the gate lives. For the full rundown, see our Gate Repair in Enterprise page.

Do you handle gate installation?

Yes, we install new gates, from single swing gates to driveway gates, and we build them to match the way your property actually drains and settles. A gate hung on a post that isn’t set right will sag every time, so we start with the posts and the ground. If your existing gate is salvageable, though, we’ll tell you that before quoting a new install. Repair-first isn’t a slogan around here.

Do you handle gate motor & opener service?

Yes, we service and repair gate motors and openers across all nine brands we’re certified on. Show me the gate closing on its own and I’ll show you where it’s failing. Sometimes it’s a sensor, sometimes it’s a bound hinge the motor is fighting, and sometimes it’s the motor itself. We diagnose it on site before recommending parts, so you only pay for what’s actually broken.

Do you handle gate access control?

Yes, we install and repair gate access control, including keypads, card readers, and remote entry for residential and small commercial gates. If your keypad has stopped responding or your remotes are unreliable, we can trace it back to the wiring or the board. Access systems only work as well as the gate they’re mounted to, so we check the mechanical side first.

Do you do on-site welding?

Yes, welding happens in your driveway, on your gate. That’s the whole point of repair-first: we fix the actual failing weld instead of swapping panels that have plenty of life left. On-site welding is faster, cheaper, and it means no gate sitting in a shop somewhere for a week while you’re stuck with an open gap in your fence line.

Do you repair fences too, or just gates?

We focus on gates, but fence repair often comes up at the same visit, and we’ll take a look while we’re there. A gate that sags can pull a fence panel out of line over time, so fixing both together usually saves a second trip. Ask when you call and we’ll tell you honestly what’s worth doing.

How a Typical Service Call Works

Here’s what to expect when you call us, so there are no surprises:

  1. You call (833) 780-1547 and a live person answers, day or night.
  2. We ask what the gate is doing and set a window we can actually hold.
  3. We arrive on time, background-checked and in uniform, and look at the gate in person.
  4. You get an upfront price before any work starts, with no haggling required.
  5. If it’s weldable, we weld it on site and the gate stays where it belongs.
  6. You look it over, and we hand over the 90-Day Done Right Promise in writing.

If you already have a written estimate from another company, hand it over and we’ll give the free second opinion before anything starts.

Why do gates sag the way they do?

Gates sag because the hinge post moves or the weld at the post fails, not because the middle of the gate is weak. Our dry, shifting soil here in Enterprise speeds that up: posts that weren’t set deep enough work loose over a few seasons, and the weight of the gate pulls everything out of line. That’s why we check the post and the welds at the hinge before touching the panel. Most “sag” complaints are really post problems in disguise.

What should I check before calling for service?

Before you pick up the phone, take a quick look at three things: whether the gate closes on its own when you let go, whether the hinge side moves more than the latch side, and whether your opener has a blinking light or error code. Those three details will help us diagnose the problem faster when you call. Don’t try to adjust a spring-loaded or heavily weighted gate yourself; those can hurt you. Let us handle anything under load.

Why does the name on the shop matter?

Because a name on the shop, down the road with a published address and license number, is the oldest form of accountability there is. It means if we don’t do right by you, you can drive over and look us in the eye. Plenty of national outfits will quote you one price on the phone and charge another at the door, then disappear into a call center. We won’t, and we’ve been at this since 2001 without switching our number or our address.

Can I stop by the shop in person?

Yes, and we’d welcome it. If you’d rather look us in the eye before booking a repair, drive over. Our address and license number are published and easy to find. A lot of our longtime customers in Enterprise first came to us that way, and they’re the reason we still answer the phone with a live person.

Getting Started

Whether your gate is sagging, stuck, or just making noise you don’t like, the fastest way to get a straight answer is to call. We’ll tell you what it likely is, when we can get out, and what it’ll cost, all in one call. Every estimate is free, and we’ll fix what we can before we ever suggest replacing it.

Ready to get that gate closing the way it should? Call Gatewood Fence & Gate Enterprise at (833) 780-1547 for a free estimate, and a live person will pick up.

Have a question we didn’t cover? Call Gatewood Fence & Gate Enterprise at (833) 780-1547.

Need Gate Repair help in Enterprise? Licensed & insured · 30-60 min response · free estimates
Call (833) 780-1547
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Gatewood Fence & Gate Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch