A Gatewood company - serving Enterprise, NV

Mighty Mule Keypad & Intercom Repair in Enterprise, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Mighty Mule Keypad & Intercom Repair: The Enterprise Owner’s Guide

We repair and replace Mighty Mule keypads and intercoms at the gate, with installed pricing typically running $185 to $420 depending on the model and whether the wiring is sound. Most of our Enterprise keypad calls get handled the same day you reach us, provided the part is on hand or the wiring doesn’t turn into a bigger job. A free diagnosis usually comes before the price, so you know whether it’s genuinely a keypad, a receiver, or the board at the operator.

Call (833) 780-1547

Owners usually find out something’s wrong one of two ways: a code that worked for years suddenly stops opening the gate, or the intercom squawks, buzzes, or goes silent when a visitor presses the button. Sometimes it’s the panel. Sometimes it’s a failed connection hiding behind a post cover that hasn’t been touched in a decade. The panel gets blamed first, and it’s often the wrong part.

Which Mighty Mule Models This Applies To

Mighty Mule’s keypad line covers thousands of swing and slide installs across the Enterprise area, and the part matters far more than the marketing suggests. Older Mighty Mule swing operators paired with their analog keypads use a wired, three-wire connection to the operator board. Newer units, including many of the wireless keypad add-ons, talk to the operator over a low-voltage receiver that’s a completely different beast. A wireless keypad installed on a machine wired for a keypad hardwired to the board, or the reverse, will do nothing – and we’ve seen that exact mismatch on more than one Enterprise install another outfit left behind.

To identify what you actually need, look at the label inside the keypad cover and the label inside the operator arm box. The operator model number is the one that matters most; the keypad model is secondary. From there you’re choosing between an OEM Mighty Mule keypad and a compatible aftermarket unit. OEM parts sync more predictably with the receiver, but the cost runs 30% to 60% higher. Aftermarket units from known makers work, particularly on older analog systems, and we tell people which way we lean for their specific setup rather than pushing the expensive box every time.

We’re an independent service provider and not affiliated with Mighty Mule. That means we don’t owe the manufacturer a sale. We owe you an honest answer about which part fits.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your Mighty Mule Keypad & Intercom Repair Is Failing

  • Codes stop working but the gate opens fine from the remote. That points at the keypad’s transmitter or the receiver, not the operator. If the remote still works, the board is healthy and the problem is upstream.
  • Intercom audio is garbled or cuts out in one direction. Usually a baked speaker or a corroded terminal. Enterprise heat and dry dust do a number on speaker cones that sit in afternoon sun.
  • Keypad lights up but won’t send a code. The membrane or the key contacts have failed. The lights run on the same 12 or 24-volt feed as the logic, so a lit keypad isn’t proof of health.
  • Button needs pressed twice or three times. Worn tactile switches. A sign the panel has reached the end of its practical life, not a sign the gate is asking for more force.
  • Nothing happens at all after a rain or a windstorm. Almost always a broken wire or a moisture-swamped connection at the post or in the conduit run. Common in Enterprise where irrigation and desert runoff cross gate wiring.

Replacement Cost & What’s Included

In Enterprise, keypad replacement runs $185 to $290 installed on a wired unit; a wireless keypad replacement lands $210 to $340. Intercom repair or replacement runs $240 to $420 installed, with the higher end covering a full station replacement or re-pulling a damaged low-voltage run. The price includes the part, labor, and a proper test with you standing at the gate before we leave. If the wiring has failed, that’s called out separately and priced before we start, never after.

Every keypad and intercom job carries our 90-Day Done Right Promise in writing. If the part fails in ninety days, one call brings us back. We also discount $40 on any repair over $200 and waive the trip charge inside the county.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check a few things yourself. Confirm the breaker to the operator is on. Look inside the keypad for water intrusion. Press the test button on the operator board to see if the gate responds without the keypad. Beyond that, this part crosses into low-voltage wiring at the post, and gate operators on a swing arm carry enough force to break bone if the gate moves while you’re reaching into the housing. That’s not a scare tactic, it’s just how these machines are built. Disconnect the battery and the AC feed before you go near the wire nuts.

Give us a call at (833) 780-1547 and we’ll diagnose it properly. Free second opinion on any written estimate you already have. And please don’t wait for the gate to fail mid-cycle to call – it’s easier on everybody when we get ahead of it.

FAQs

Contact Gatewood Fence & Gate Enterprise

Call (833) 780-1547 for a free estimate on your Mighty Mule keypad or intercom in Enterprise. We also service LiftMaster, Ghost Controls, and DoorKing, and we’ll be there ourselves – if not by phone today, then at your gate in the window we promised. Live person answers, every day, every hour.

Written by the team at Gatewood Fence & Gate Enterprise, serving Enterprise and nearby areas.

Need Gate Repair help nationwide? Licensed & insured · 30-60 min response · free estimates
Call (833) 780-1547
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Gatewood Fence & Gate Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch