Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Installation in Enterprise: What to Know First
We provide independent Ghost Controls gate installation in Enterprise, NV, and most residential driveway and pedestrian gate jobs wrap up in a single visit once the gate, posts, and operator are on site. Installation is scheduled work, not same-day work: we come out, measure, and hand you a written price before anything gets ordered. That price is the price. As an independent Ghost Controls service provider, we’re not affiliated with or authorized by Ghost Controls, but we know their equipment well enough to install it right the first time.
This page is for the Enterprise homeowner who already owns a Ghost Controls opener or gate kit and wants it hung, wired, and dialed in by someone who does this every week. Call us at (833) 780-1547 and you’ll get a live person.
Key Takeaways
- Ghost Controls installs are measured and scheduled, with a written price agreed before any work starts.
- We’re an independent Ghost Controls installer, not a Ghost Controls dealer or authorized agent.
- Every job carries the 90-Day Done Right Promise in writing.
- We service nine major gate brands, so we can tell you honestly when a different approach fits better.
How Ghost Controls Products Fail – and How We Fix Them
Most Ghost Controls problems we see in Enterprise come from installation choices, not from the operator itself. Here’s what actually goes wrong, and what we do about it.
- Arms mounted out of level on the TDS and TSS series. These light-duty swing operators are sensitive to a mount that isn’t square to the gate. When the arm travels uphill or downhill, the control board sees false current spikes and the gate reverses halfway. We re-set the mounting bracket to the manufacturer’s geometry instead of shimming the arm to make it look right.
- Undersized battery and solar supply. Ghost Controls runs on 12V battery power, often charged by a small solar panel. In Enterprise, a battery that sat through a cold desert winter and a summer of 100-degree afternoons loses capacity quietly. Wide temperature swings are hard on sealed batteries. We test the battery and panel output before blaming the board, because nine times out of ten the board is fine.
- Post movement at the hinge. A gate sags in the hinge post, not in the middle, and that’s where we start. If the post is loose, the operator is fighting a moving target and no adjustment will hold. We check post stability and soil conditions first, since Enterprise lots range from hard caliche to loose fill, and we weld or reset the post as needed.
- Entry keypad and remote pairing issues on the AXS and ZIP series. These accessories are reliable, but pairing gets rushed and fails later. We pair every remote and keypad on site and then walk you through it so you’re not calling us back for a button press.
- Safety edge and photo-eye placement. On sliding and double-gate setups, the reversing devices have to see what they’re supposed to see. We mount and align them per the manual, not “close enough,” because a gate that closes on a person is a real hazard.
Two things you won’t find on Ghost Controls’s own site: the TDS arm binding symptom above shows up far more often than a failed motor, and desert temperature swings shorten battery life in ways a phone diagnosis can’t capture. We see both weekly in Enterprise.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Ghost Controls Gate Installation Process
Here’s how a Ghost Controls installation runs from first call to cleanup.
- 1
Phone call and free estimate. A live person answers, and we book a time. No voicemail, no queue.
- 2
On-site measure and diagnostics. We look at the gate, posts, footing, and power situation, and confirm which Ghost Controls operator fits your gate’s weight and width.
- 3
Written price. You get the number in writing and we agree on it before any work starts. Standing offers apply: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
- 4
Parts decision. We tell you plainly when an OEM part is warranted and when a quality aftermarket part does the job for less, and we keep the install warranty-safe either way.
- 5
Install and test. We mount, wire, pair every remote and keypad, cycle the gate, and set the force and travel limits.
- 6
Cleanup and the guarantee. We haul off packaging and scrap, and the 90-Day Done Right Promise goes on the job in writing. If it’s not done right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterWhat Ghost Controls Gate Installation Costs in Enterprise
Enterprise pricing depends on gate size, post condition, and whether power or solar is already in place. Here are the ranges we typically quote.
| Scenario | Typical range |
|---|---|
| Pedestrian swing gate, single operator (TSS series) | $450 – $850 |
| Single driveway swing gate (TDS series) | $700 – $1,400 |
| Double swing gate, dual operators | $1,400 – $2,600 |
| Sliding gate operator install | $1,200 – $2,400 |
| Solar panel and battery setup | $250 – $550 |
| Keypad, remotes, safety edges | $150 – $450 |
| Post reset or on-site welding | $150 – $600 |
What moves the price: gate weight and width, whether the footing is solid, wire distance from the house, and how many access devices you want. The number we quote is the number you pay, agreed before work starts. Call (833) 780-1547 for a free estimate.
Why Enterprise Homeowners Call Gatewood Fence & Gate Enterprise for Ghost Controls Work
We’re locally owned and owner-operated, with a published address and license number. Our technicians have up to 25 years of experience, and each job is background-checked and handled by the person who shows up. Every job carries the 90-Day Done Right Promise in writing, and a live person answers the phone around the clock.
We’re certified to service nine major gate brands. If you own Ghost Controls, that’s what we work on. If your gate would be better served by a LiftMaster, Mighty Mule, or DoorKing setup, we’ll tell you so. We repair first, and we weld on site so your gate stays in the driveway. You can look us in the eye at the shop or call and get a real person. We serve Enterprise and the surrounding communities.
FAQs
An installation done to Ghost Controls’s manual specs keeps the equipment warranty intact; improper mounting or aftermarket wiring can void it. We install to spec and document the work so your coverage stands. Call (833) 780-1547 for a free estimate.
Yes. We source OEM Ghost Controls parts and quality aftermarket equivalents. We’ll tell you which is which and let you decide. Call for a free second opinion on any written estimate.
Usually repair, if the arm, board, or battery is the only problem. We check the gate and posts first, since a loose post makes any operator look broken. Our repair-first rule means we don’t swap parts that don’t need swapping.
Installation is scheduled work, not same-day. We measure, order, and book you in, with a written price agreed upfront. Call (833) 780-1547 and we’ll get you on the calendar.
Yes. We handle low-voltage power runs, solar and battery setups, photo-eyes, safety edges, keypads, and remote pairing as part of the job. Everything is tested on site before we leave.
Ready to get your Ghost Controls gate installed right? Call Gatewood Fence & Gate Enterprise at (833) 780-1547 for a free estimate. A live person answers, the price is agreed before work starts, and the 90-Day Done Right Promise backs every job.
Written by the team at Gatewood Fence & Gate Enterprise, serving Enterprise and nearby areas.