A Gatewood company - serving Enterprise, NV

Ghost Controls Gate Access Control in Enterprise, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Access Control in Enterprise: What to Know First

We handle independent Ghost Controls gate access control in Enterprise, typically within a few days for standard keypad and remote work and same-day for emergencies like a gate stuck open. Pricing for most access-control repairs in Enterprise runs $150 to $450, and every price is quoted and agreed before any work starts. Gatewood Fence & Gate Enterprise is not affiliated with or authorized by Ghost Controls; we’re an independent Ghost Controls service provider.

Call (833) 780-1547

This page is for the homeowner in Enterprise whose Ghost Controls keypad went dark, whose remote stopped reaching the gate, or whose phone-entry app quit talking to the operator. If that’s you, call (833) 780-1547 and a live person picks up.

How Ghost Controls Products Fail – and How We Fix Them

Ghost Controls builds solid DIY-friendly operators, and the failures we see in Enterprise are specific to how those units are wired and how they age in desert heat and monsoon moisture. Here’s what actually goes wrong, model line by model line.

  • The keypad goes dead on the Heavy Duty series in late summer. The ARD-series keypads and their wireless counterparts lose their display or stop accepting codes when the internal battery and the sun-baked housing conspire against them. In Enterprise, an uncovered pedestal sees triple-digit temps by June, and we regularly find keypad gaskets cracked by July. We test the keypad at the terminals first, then replace only the unit or battery that failed, not the whole system.
  • Remote range collapses after a new fence line goes in. Ghost Controls remotes that worked at 100 feet suddenly need you to be at the gate. The culprit is usually a receiver antenna rerouted behind new block wall or a control board that took a moisture hit during monsoon season. We trace the antenna, reseat it outside the metal, and check the receiver’s voltage before we sell you a new remote that won’t fix it.
  • The operator “forgets” the code and closes on its own. We see the control board’s memory reset or scramble after a power surge – common in Enterprise where summer storms roll through. Opening/closing limits drift on the TSS series actuators and the gate starts reversing mid-travel. This is a limit-and-force calibration job, not a parts swap, and we run it with the gate in its actual track.
  • Phone entry and smart access drop off the network. The smart hub and app pairing on newer Ghost Controls systems fails when the Wi-Fi password changes or firmware falls behind. We re-pair the module, check the operator’s wiring for a loose common, and confirm the gate responds to both the app and the physical remote before we leave.
  • Card readers and video intercoms wired to a Ghost Controls operator act up at the low-voltage side. Aftermarket readers and intercoms spliced onto a Ghost Controls board can trigger false opens when the transformer is undersized or the common is shared with the safety edges. We meter the transformer under load, separate the commons, and get the reader talking to the operator cleanly.
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Ghost Controls Gate Access Control Process

Every Ghost Controls job follows the same path, whether it’s a keypad swap or a full smart-access re-wire. Here’s what happens from your call to the cleanup.

  1. 1
    Phone diagnosis. A live person answers, takes your model and symptom, and books a window. No voicemail, no dispatch queue.
  2. 2
    On-site testing. Hal or the technician tests the keypad, remote, receiver, transformer, and control board at the terminals before touching a single part.
  3. 3
    Parts decision. We go OEM for Ghost Controls boards, receivers, and keypads where warranty and fit matter, and use quality aftermarket for universal items like safety edges and transformers. We tell you which is which and why.
  4. 4
    The repair. Keypads, receivers, boards, and modules are replaced or re-paired on site. Wiring faults get fixed at the connection, not buried under electrical tape.
  5. 5
    The test. We run the gate through full open-close cycles, test every access method the system supports, and confirm the safety edges and limits before we pack up.
  6. 6
    The guarantee. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Ghost Controls Gate Access Control Costs in Enterprise

Here’s what common Ghost Controls access-control work runs in Enterprise. These are real ranges, not teaser numbers. The final price is quoted and agreed before any work starts.

Job Typical Range
Keypad replacement or re-pair (ARD-series) $150 – $280
Remote and receiver diagnosis and fix $120 – $220
Control board replacement (TSS/Heavy Duty) $250 – $450
Phone entry / smart hub re-pair and wiring $150 – $300
Card reader or video intercom integration $250 – $500
Limit and force calibration $120 – $200

What moves the price: the model, whether the board is OEM or aftermarket, how far the keypad pedestal sits from the operator, and whether the low-voltage wiring needs to be rerun. We give a free second opinion on any written estimate, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. No trip charge inside the county. Call (833) 780-1547 for a free estimate.

Why Enterprise Homeowners Call Gatewood Fence & Gate Enterprise for Ghost Controls Work

We’ve been locally owned and owner-operated since 2001, and Ghost Controls is one of nine major brands we’re certified to service, alongside LiftMaster, Mighty Mule, and DoorKing. Our technicians have up to 25 years of experience, and we know Ghost Controls boards, keypads, and smart modules well enough to tell you when a part needs replacing and when it just needs recalibrating. The 90-Day Done Right Promise is stamped in writing on every job. Calls are answered by a live person 24/7, and Hal’s name and license number are published so you can look them up. In Enterprise, that accountability matters more than a slick brochure. If the gate’s not working, call and we’ll get a real person on the line.

FAQs

Is my Ghost Controls warranty still good if I have someone else work on it? Ghost Controls’s manufacturer warranty covers their components against defects, and our repairs don’t void it when we use OEM parts. We’ll tell you before we start if a repair could affect your coverage. Call (833) 780-1547 for a free second opinion on any written estimate.

Can you get Ghost Controls parts in Enterprise? Yes. We source OEM Ghost Controls keypads, receivers, control boards, and smart modules, and we use quality aftermarket parts for universal items like transformers and safety edges. Most standard parts arrive within a few days; same-day emergency repairs are available when the gate is stuck open.

Should I repair or replace my Ghost Controls operator? Repair usually wins, and we’ll tell you honestly when it doesn’t. If the board, keypad, or receiver is the problem, fixing it is cheaper than a new operator, and Ghost Controls parts are still available for most models. Replacement only makes sense when the actuator or gearbox is worn past saving.

How fast can you get to my gate in Enterprise? Same-day for emergencies like a gate stuck open or a security gate that won’t latch, and within a few days for scheduled keypad, remote, and smart-access work. Call (833) 780-1547 and a live person answers around the clock.

Do you handle Ghost Controls phone entry and smart access setup? Yes. We re-pair the smart hub, check the wiring and transformer, and confirm the app and physical remote both control the gate before we leave. If the module has failed, we’ll quote the OEM replacement on the spot.

Written by the team at Gatewood Fence & Gate Enterprise, serving Enterprise and nearby areas.

Need Gate Repair help nationwide? Licensed & insured · 30-60 min response · free estimates
Call (833) 780-1547
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Gatewood Fence & Gate Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch