A Gatewood company - serving Enterprise, NV

DoorKing Hinge & Roller Replacement in Enterprise, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

DoorKing Hinge & Roller Replacement: The Enterprise Owner’s Guide

We replace worn DoorKing hinges and rollers on slide and swing gates across Enterprise, and most residential jobs land between $180 and $420 installed, depending on how many rollers and hangers are gone and whether the hinge post needs welding. On a standard two-roller carriage we can usually get to you the same day you call, and the price we quote before we start is the price on the invoice when we’re done.

Call (833) 780-1547

Most Enterprise owners don’t wake up thinking about hinges. They notice the gate dragging a rut in the gravel, a roller grinding loud enough to hear from the kitchen, or the gate stopping halfway and reversing like it’s confused. Sometimes the operator gets blamed first, and sometimes a whole new gate gets sold when the real problem is a $30 roller with a flat spot. We look at the hardware before we touch the motor, every time.

Which DoorKing Models This Applies To

DoorKing builds a lot of different gate hardware, and the hinge and roller assemblies are not interchangeable across the line. The 6000, 6050, 6400, and 6500 series slide gates each use a slightly different carriage and hanger setup, and the 1500 and 1600 series swing gates take a completely separate hinge style. If you’re not sure which one you have, look for the model plate riveted to the operator housing or stamped on the gate frame near the idler. If the plate is gone or painted over, measure the gate frame thickness and the existing roller diameter, and we can match it from there.

Here’s the part that catches people: DoorKing changed roller materials and hanger bolt patterns within some series without changing the model number. That means a “DoorKing roller” listed online as fitting a 6400 might have the right diameter but the wrong groove profile for your track. We measure the track, not just the roller, because a mismatched groove will wear out in weeks. Aftermarket equivalents from quality suppliers are fine for most residential work, and we’ll tell you honestly when OEM is worth the extra cost (usually when the gate is commercial-duty or the track is worn irregular). We’re an independent service shop, not affiliated with DoorKing, so we’re matching your gate, not a catalog page.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your DoorKing Hinge & Roller Replacement Is Failing

Most failures show up as operator complaints, but the root cause is almost always in the hardware. Watch for these:

  • Grinding or squealing during travel. A roller with a seized bearing or a flat-spotted wheel drags instead of rolling. Once the flat spot forms, the noise gets worse fast and the operator works harder every cycle.
  • Gate sags or drags at the hinge post. This is usually a worn hinge pin or a hinge post that has shifted or rotted at the base. A gate sags at the post, not in the middle, and replacing rollers won’t fix a post problem – it’ll just wear the new rollers out.
  • Gate stops and reverses halfway. The operator senses resistance and backs off as a safety feature. A binding roller or a hanger out of adjustment creates that resistance, and the operator gets blamed for doing its job.
  • Visible wobble or play in the gate. Grab the gate and rock it gently. If the top moves several inches before the bottom does, the hangers or hinge hardware are loose or worn through.
  • Rust streaks or metal shavings on the track. Nevada dust plus a dry bearing equals grinding paste. Shiny metal powder under the track means the roller is eating itself.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for DoorKing hinge and roller replacement in Enterprise runs roughly $180 to $280 for a standard two-roller slide gate with no complications, and $280 to $420 when the job includes hinge post repair, hanger realignment, or on-site welding of a cracked carriage bracket. A swing gate hinge set typically falls in the $220 to $380 range depending on how many hinges and whether we’re welding the frame back to sound metal. These are installed prices, including parts, labor, and adjustment to get the gate tracking true.

What drives you toward the top of the range is almost always condition, not part cost: rusted bolts that won’t break free, a bent track that needs straightening before any new roller will last, or a hinge post that needs to be reset in concrete. We quote before work starts and stick to it. Every job carries our 90-Day Done Right Promise in writing – if something we touched isn’t right, one call brings us back. No trip charge inside the county, and we take $40 off any repair over $200 if you mention the standing offer when you call.

DIY or Call Us?

You can safely check some of this yourself. Rock the gate at the hinge post, look for metal shavings under the track, spin the rollers by hand and listen for grinding, and look for missing or loose bolts. That’s diagnostics, not repair, and it helps us know what to bring. What we’d steer you away from is unbolting a loaded carriage or hanger while the gate is hanging – a slide gate panel can weigh several hundred pounds, and a swing gate hinge pin under load can slip and drop the panel on an arm or a foot. On a swing gate, the top hinge also carries most of the gate’s weight once the gate is open, and that’s not a job to learn on.

If you’ve got a helper, a jack, and a solid afternoon to spend, we’re not going to talk you out of the diagnosis. But when the gate is heavy, the post is suspect, or you just want it done and confirmed safe, call us at (833) 780-1547. We’ll get it fixed, tested, and closing smooth before we leave.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 30-60 min response · free estimates
Call (833) 780-1547
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Gatewood Fence & Gate Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch